ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MC100E142FNG
Lihat Butiran Helaian data

MC100E142FNG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate
  • Characteristics: High-speed, ECL (Emitter-Coupled Logic) compatible, differential input/output, low power consumption
  • Package: 28-pin PLCC (Plastic Leaded Chip Carrier)
  • Essence: The MC100E142FNG is a high-speed differential 4-input NAND gate designed for use in digital logic circuits.
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Supply Voltage: -5.2V to -3.8V
  • Input Voltage: -5.2V to -3.8V
  • Output Voltage: -5.2V to -3.8V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.6 ns (typical)
  • Output Current: ±50 mA (maximum)

Pin Configuration

The MC100E142FNG has a total of 28 pins. The pin configuration is as follows:

Pin 1: VEE (Negative Power Supply) Pin 2: Q0 (Output) Pin 3: D0 (Input) Pin 4: D1 (Input) Pin 5: D2 (Input) Pin 6: D3 (Input) Pin 7: GND (Ground) Pin 8: Q3 (Output) Pin 9: Q2 (Output) Pin 10: Q1 (Output) Pin 11: VBB (Bias Voltage) Pin 12: Q4 (Output) Pin 13: D4 (Input) Pin 14: D5 (Input) Pin 15: D6 (Input) Pin 16: D7 (Input) Pin 17: VCC (Positive Power Supply) Pin 18: Q7 (Output) Pin 19: Q6 (Output) Pin 20: Q5 (Output) Pin 21: Q8 (Output) Pin 22: D8 (Input) Pin 23: D9 (Input) Pin 24: D10 (Input) Pin 25: D11 (Input) Pin 26: VEE (Negative Power Supply) Pin 27: Q11 (Output) Pin 28: Q10 (Output)

Functional Features

  • High-speed operation suitable for high-frequency applications
  • ECL compatible, allowing easy integration with existing ECL-based systems
  • Differential input/output allows for noise immunity and improved signal integrity
  • Low power consumption, making it energy-efficient

Advantages and Disadvantages

Advantages: - High-speed performance enables efficient data processing - Compatibility with ECL systems simplifies integration - Differential input/output enhances noise immunity - Low power consumption reduces energy usage

Disadvantages: - Limited availability of alternative models - Requires careful handling due to sensitivity to electrostatic discharge (ESD)

Working Principles

The MC100E142FNG operates based on the principles of Emitter-Coupled Logic. It utilizes differential inputs to perform logical operations and produces differential outputs. The internal circuitry ensures high-speed operation while maintaining low power consumption.

Detailed Application Field Plans

The MC100E142FNG is commonly used in various applications that require high-speed digital logic operations. Some of the typical application fields include:

  1. Telecommunications: Used in high-speed data transmission systems, such as fiber-optic networks and wireless communication devices.
  2. Computer Systems: Integrated into central processing units (CPUs) and memory modules to facilitate fast data processing.
  3. Test and Measurement Equipment: Employed in high-frequency signal analysis and data acquisition systems.
  4. Industrial Automation: Integrated into control systems for precise timing and synchronization of industrial processes.

Alternative Models

While the MC100E142FNG is a widely used logic gate, there are alternative models available that offer similar functionality. Some notable alternatives include:

  1. MC10ELT22: Differential 2-input NAND gate with similar characteristics and pin configuration.
  2. MC100EP16: Differential 4-input XOR/XNOR gate suitable for high-speed applications.
  3. MC100LVEL11: Differential 3.3V ECL-compatible 3-input AND/NAND gate.

These alternative models can be considered based on specific requirements and availability.

Word count: 486 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MC100E142FNG dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MC100E142FNG in technical solutions:

  1. Q: What is MC100E142FNG? A: MC100E142FNG is a high-speed, low-power ECL (Emitter-Coupled Logic) 9-bit binary counter designed for use in various electronic applications.

  2. Q: What is the operating voltage range of MC100E142FNG? A: The operating voltage range of MC100E142FNG is typically between -4.2V and -5.7V.

  3. Q: What is the maximum clock frequency supported by MC100E142FNG? A: MC100E142FNG can support clock frequencies up to 1.6 GHz.

  4. Q: Can MC100E142FNG be used in high-speed data communication systems? A: Yes, MC100E142FNG is commonly used in high-speed data communication systems, such as fiber optic networks and telecommunications equipment.

  5. Q: Does MC100E142FNG require external components for operation? A: Yes, MC100E142FNG requires external power supply and termination resistors for proper operation.

  6. Q: What is the power consumption of MC100E142FNG? A: The power consumption of MC100E142FNG is typically around 500 mW.

  7. Q: Can MC100E142FNG operate in harsh environments? A: MC100E142FNG is not specifically designed for harsh environments, so additional measures may be required to ensure its reliability in extreme conditions.

  8. Q: What are the typical applications of MC100E142FNG? A: MC100E142FNG is commonly used in applications such as clock distribution, frequency synthesis, and high-speed data processing.

  9. Q: Can MC100E142FNG be used in battery-powered devices? A: MC100E142FNG is not recommended for battery-powered devices due to its relatively high power consumption.

  10. Q: Is MC100E142FNG compatible with other ECL logic families? A: Yes, MC100E142FNG is compatible with other ECL logic families, allowing for easy integration into existing systems.

Please note that these answers are general and may vary depending on specific design considerations and requirements.