ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MC10H116FNR2G
Lihat Butiran Helaian data

MC10H116FNR2G

Product Overview

  • Category: Integrated Circuit
  • Use: Logic Gate
  • Characteristics: High-speed, Low-power, ECL (Emitter-Coupled Logic) Technology
  • Package: 16-pin PLCC (Plastic Leaded Chip Carrier)
  • Essence: This integrated circuit is designed to perform logic functions in high-speed digital systems.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Logic Family: ECL
  • Number of Gates: 4
  • Supply Voltage: -5.2V to -3.8V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.7 ns (typical)
  • Power Dissipation: 500 mW (max)

Pin Configuration

The MC10H116FNR2G has a 16-pin PLCC package with the following pin configuration:

  1. VEE (Ground)
  2. Q0 (Output)
  3. D0 (Input)
  4. D1 (Input)
  5. Q1 (Output)
  6. Q2 (Output)
  7. D2 (Input)
  8. D3 (Input)
  9. Q3 (Output)
  10. VCC (Power Supply)
  11. Q4 (Output)
  12. D4 (Input)
  13. D5 (Input)
  14. Q5 (Output)
  15. Q6 (Output)
  16. D6 (Input)

Functional Features

  • Performs logical AND and OR operations on input signals.
  • High-speed operation allows for efficient processing of digital signals.
  • Low-power consumption makes it suitable for battery-powered devices.
  • ECL technology ensures reliable performance in noisy environments.

Advantages and Disadvantages

Advantages: - High-speed operation enables fast data processing. - Low-power consumption extends battery life in portable devices. - ECL technology provides noise immunity and reliable performance.

Disadvantages: - Requires negative power supply, which may limit compatibility with certain systems. - Limited number of gates per package compared to other logic families.

Working Principles

The MC10H116FNR2G operates based on the principles of Emitter-Coupled Logic. It uses transistors to perform logical operations on input signals. The inputs are combined using AND and OR gates, and the resulting output signals are amplified and inverted. This allows for high-speed and low-power operation.

Application Field Plans

The MC10H116FNR2G is commonly used in various applications that require high-speed digital logic functions. Some potential application fields include:

  1. Telecommunications: Used in high-speed data transmission systems.
  2. Networking: Enables efficient routing and switching in network equipment.
  3. Industrial Automation: Provides logic functions in control systems.
  4. Aerospace: Used in avionics systems for reliable signal processing.
  5. Medical Devices: Enables fast and accurate data processing in medical equipment.

Alternative Models

There are several alternative models available that offer similar functionality to the MC10H116FNR2G. Some popular alternatives include:

  1. MC100EP116: 16-pin TSSOP package, compatible with ECL logic family.
  2. SN74LVC1G08: 5-pin SOT-23 package, compatible with CMOS logic family.
  3. CD4007UB: 14-pin DIP package, compatible with CMOS logic family.

These alternative models can be considered based on specific requirements and system compatibility.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MC10H116FNR2G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MC10H116FNR2G in technical solutions:

  1. Question: What is MC10H116FNR2G?
    Answer: MC10H116FNR2G is a high-speed ECL (Emitter-Coupled Logic) quad differential line receiver.

  2. Question: What is the operating voltage range for MC10H116FNR2G?
    Answer: The operating voltage range for MC10H116FNR2G is typically between -4.2V and -5.7V.

  3. Question: What is the maximum data rate supported by MC10H116FNR2G?
    Answer: MC10H116FNR2G can support data rates up to 500 Mbps.

  4. Question: Can MC10H116FNR2G be used in both single-ended and differential applications?
    Answer: No, MC10H116FNR2G is specifically designed for differential applications.

  5. Question: What is the input common-mode voltage range for MC10H116FNR2G?
    Answer: The input common-mode voltage range for MC10H116FNR2G is typically between -2.0V and -4.0V.

  6. Question: Does MC10H116FNR2G have built-in termination resistors?
    Answer: No, MC10H116FNR2G does not have built-in termination resistors. External termination resistors may be required depending on the application.

  7. Question: Can MC10H116FNR2G be used in high-speed communication systems?
    Answer: Yes, MC10H116FNR2G is suitable for high-speed communication systems such as telecommunications and networking.

  8. Question: What is the power supply voltage required for MC10H116FNR2G?
    Answer: The power supply voltage for MC10H116FNR2G is typically between -4.2V and -5.7V.

  9. Question: Is MC10H116FNR2G compatible with other logic families?
    Answer: MC10H116FNR2G is not directly compatible with other logic families, as it operates on ECL levels. However, level-shifting techniques can be used to interface with other logic families.

  10. Question: What are some typical applications of MC10H116FNR2G?
    Answer: MC10H116FNR2G is commonly used in high-speed data transmission systems, clock distribution networks, and other applications requiring differential line receivers.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.