ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MC4558CP
Lihat Butiran Helaian data

MC4558CP

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Dual High-Gain Operational Amplifier
  • Package: DIP-8 (Dual In-Line Package with 8 pins)
  • Essence: The MC4558CP is a dual operational amplifier that provides high gain and low distortion. It is commonly used in audio applications, such as amplifiers, mixers, and audio signal processing.
  • Packaging/Quantity: The MC4558CP is typically sold in packs of 10 or more.

Specifications

  • Supply Voltage: ±5V to ±18V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 30nA (maximum)
  • Input Voltage Range: ±12V
  • Output Voltage Swing: ±13V
  • Gain Bandwidth Product: 3MHz
  • Slew Rate: 0.5V/µs
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MC4558CP has a standard DIP-8 pin configuration:

__ __ OUT1 | 1 8 | VCC+ IN1- | 2 7 | OUT2 IN1+ | 3 6 | IN2- VCC-| 4 5 | IN2+ ¯¯ ¯¯

Functional Features

  • Dual operational amplifier with high gain and low distortion.
  • Wide supply voltage range allows for flexibility in various applications.
  • Low input offset voltage and bias current ensure accurate signal amplification.
  • High output voltage swing enables compatibility with different load requirements.
  • Good stability and frequency response characteristics make it suitable for audio applications.

Advantages and Disadvantages

Advantages: - High gain and low distortion for accurate signal amplification. - Wide supply voltage range allows for versatile use. - Good stability and frequency response characteristics. - Suitable for audio applications.

Disadvantages: - Limited output current capability. - Not suitable for high-speed applications.

Working Principles

The MC4558CP is based on a differential amplifier configuration. It consists of two operational amplifiers in a single package. Each amplifier has a non-inverting input (IN1+ and IN2+) and an inverting input (IN1- and IN2-). The amplifiers amplify the voltage difference between the inputs and provide an amplified output signal.

Detailed Application Field Plans

The MC4558CP is commonly used in various audio-related applications, including: - Audio amplifiers - Mixers - Audio signal processing circuits - Active filters - Tone control circuits

Alternative Models

Some alternative models to the MC4558CP include: - LM358 - TL072 - NE5532 - LM833

These alternatives offer similar functionality and can be used as replacements depending on specific requirements.

Note: This entry provides a basic overview of the MC4558CP operational amplifier. For more detailed information, please refer to the datasheet provided by the manufacturer.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MC4558CP dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MC4558CP in technical solutions:

  1. Q: What is MC4558CP? A: MC4558CP is a dual operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.

  2. Q: What are the key features of MC4558CP? A: MC4558CP features low input bias current, high slew rate, wide bandwidth, and low noise, making it suitable for audio amplification, signal conditioning, and other precision applications.

  3. Q: What is the power supply voltage range for MC4558CP? A: The power supply voltage range for MC4558CP typically ranges from ±4V to ±18V.

  4. Q: Can MC4558CP be used as a voltage follower? A: Yes, MC4558CP can be configured as a voltage follower by connecting the output to the inverting input, which provides unity gain and high input impedance.

  5. Q: How can I use MC4558CP for audio amplification? A: MC4558CP can be used as an audio amplifier by configuring it in an inverting or non-inverting amplifier configuration with appropriate feedback resistors.

  6. Q: Is MC4558CP suitable for low-power applications? A: Yes, MC4558CP has a low quiescent current consumption, making it suitable for low-power applications where power efficiency is important.

  7. Q: Can MC4558CP operate at high frequencies? A: Yes, MC4558CP has a wide bandwidth and high slew rate, allowing it to operate at high frequencies, making it suitable for applications such as active filters and oscillators.

  8. Q: What is the input offset voltage of MC4558CP? A: The input offset voltage of MC4558CP is typically in the range of a few millivolts, which can be minimized using external offset nulling techniques if required.

  9. Q: Can MC4558CP drive capacitive loads? A: Yes, MC4558CP has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.

  10. Q: Are there any recommended application circuits available for MC4558CP? A: Yes, the datasheet of MC4558CP provides various application circuits and example designs that can be used as a reference for different applications.

Please note that these answers are general and may vary depending on specific circuit requirements and design considerations.