ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
NCP1013ST130T3
Lihat Butiran Helaian data

NCP1013ST130T3

Product Overview

Category

NCP1013ST130T3 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • Small form factor
  • High efficiency

Package

NCP1013ST130T3 is available in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of NCP1013ST130T3 lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Voltage: 13V DC
  • Maximum Output Current: 130mA
  • Operating Temperature Range: -40°C to +125°C
  • Efficiency: Up to 90%
  • Frequency: 65kHz

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. COMP: Compensation pin for stability control
  5. DRAIN: Switching transistor drain connection
  6. SOURCE: Switching transistor source connection

Functional Features

  • Integrated high-voltage startup circuit
  • Pulse frequency modulation (PFM) control
  • Overload and short-circuit protection
  • Low standby power consumption
  • Soft-start function for smooth power-up

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Wide input voltage range enables versatile applications
  • Integrated protection features enhance reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Frequency limitation may restrict compatibility with certain designs

Working Principles

NCP1013ST130T3 operates on the principle of pulse frequency modulation (PFM). It regulates the output voltage by adjusting the switching frequency of the internal transistor. The feedback pin (FB) monitors the output voltage and provides control signals to maintain the desired voltage level.

Detailed Application Field Plans

NCP1013ST130T3 finds applications in various fields, including but not limited to: 1. LED lighting systems 2. Consumer electronics 3. Industrial automation 4. Power supplies for small appliances 5. Battery chargers

Detailed and Complete Alternative Models

  1. NCP1013P100G: Similar functionality with a higher output current capability of 1000mA.
  2. NCP1013ST330T3: Similar functionality with a higher output voltage of 33V DC.
  3. NCP1013ST500T3: Similar functionality with a higher output current capability of 500mA.

These alternative models provide options based on specific requirements and can be considered as alternatives to NCP1013ST130T3.

Word count: 399 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NCP1013ST130T3 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of NCP1013ST130T3 in technical solutions:

  1. Q: What is NCP1013ST130T3? A: NCP1013ST130T3 is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the typical applications of NCP1013ST130T3? A: NCP1013ST130T3 is commonly used in offline switch mode power supplies (SMPS), LED lighting, and other low-power applications.

  3. Q: What is the input voltage range supported by NCP1013ST130T3? A: The input voltage range for NCP1013ST130T3 is typically between 85V and 265V AC.

  4. Q: What is the maximum output power that can be achieved with NCP1013ST130T3? A: The maximum output power depends on the specific design and application, but it is generally suitable for low-power applications up to a few watts.

  5. Q: Does NCP1013ST130T3 have built-in protection features? A: Yes, NCP1013ST130T3 includes various protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown.

  6. Q: Can NCP1013ST130T3 operate in a wide temperature range? A: Yes, NCP1013ST130T3 is designed to operate reliably in a wide temperature range, typically from -40°C to +125°C.

  7. Q: Is NCP1013ST130T3 compatible with both primary-side and secondary-side regulation? A: Yes, NCP1013ST130T3 supports both primary-side and secondary-side regulation, providing flexibility in design.

  8. Q: What is the typical efficiency of NCP1013ST130T3? A: The efficiency of NCP1013ST130T3 depends on the specific application and design, but it can achieve high efficiencies above 80% in many cases.

  9. Q: Does NCP1013ST130T3 require an external oscillator for operation? A: No, NCP1013ST130T3 has an internal oscillator, eliminating the need for an external component.

  10. Q: Are there any reference designs or application notes available for NCP1013ST130T3? A: Yes, the manufacturer typically provides reference designs and application notes that can help with the implementation of NCP1013ST130T3 in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and design considerations of each application.