ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
NCP5359DR2G
Lihat Butiran Helaian data

NCP5359DR2G

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency voltage regulator - Low dropout voltage - Adjustable output voltage - Overcurrent and thermal protection - Small form factor

Package: DFN-8 (Dual Flat No-Lead)

Essence: The NCP5359DR2G is a power management IC designed to regulate voltage efficiently with low dropout. It offers adjustable output voltage, overcurrent protection, and thermal protection in a compact package.

Packaging/Quantity: The NCP5359DR2G is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage Range: 0.8V - 5.5V
  • Maximum Output Current: 1A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NCP5359DR2G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. NC: No connection
  7. NC: No connection
  8. PG: Power good indicator pin

Functional Features

  • High Efficiency: The NCP5359DR2G provides high efficiency voltage regulation, minimizing power loss.
  • Adjustable Output Voltage: The output voltage can be adjusted within a wide range, allowing flexibility in various applications.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Protection: Thermal protection prevents the IC from overheating, ensuring reliable operation.
  • Small Form Factor: The DFN-8 package offers a compact size, making it suitable for space-constrained designs.

Advantages and Disadvantages

Advantages: - High efficiency operation - Adjustable output voltage - Overcurrent and thermal protection - Compact package size

Disadvantages: - Limited maximum output current (1A) - Narrow input voltage range (2.5V - 6.5V)

Working Principles

The NCP5359DR2G operates as a voltage regulator by maintaining a stable output voltage regardless of variations in the input voltage. It achieves this through a feedback mechanism that continuously adjusts the internal circuitry to compensate for changes in load conditions. The IC monitors the output voltage and compares it to a reference voltage, making necessary adjustments to maintain the desired output voltage level.

Detailed Application Field Plans

The NCP5359DR2G is commonly used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Industrial equipment

Detailed and Complete Alternative Models

  1. NCP5369DR2G: Similar to NCP5359DR2G with higher maximum output current (1.5A).
  2. NCP5339DR2G: Similar to NCP5359DR2G with wider input voltage range (2.7V - 6.5V).
  3. NCP5349DR2G: Similar to NCP5359DR2G with lower dropout voltage (150mV at 1A).

These alternative models offer similar functionality to the NCP5359DR2G while providing specific enhancements based on different requirements.

Word count: 411 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NCP5359DR2G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of NCP5359DR2G in technical solutions:

  1. Q: What is NCP5359DR2G? A: NCP5359DR2G is a voltage regulator IC (integrated circuit) designed for power management applications.

  2. Q: What is the input voltage range of NCP5359DR2G? A: The input voltage range of NCP5359DR2G is typically between 2.7V and 5.5V.

  3. Q: What is the output voltage range of NCP5359DR2G? A: The output voltage range of NCP5359DR2G can be adjusted from 0.6V to 3.6V.

  4. Q: What is the maximum output current of NCP5359DR2G? A: The maximum output current of NCP5359DR2G is typically around 1.5A.

  5. Q: Is NCP5359DR2G suitable for battery-powered applications? A: Yes, NCP5359DR2G is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  6. Q: Does NCP5359DR2G have built-in protection features? A: Yes, NCP5359DR2G includes overcurrent protection, thermal shutdown, and undervoltage lockout features for enhanced reliability.

  7. Q: Can NCP5359DR2G operate in a wide temperature range? A: Yes, NCP5359DR2G is designed to operate in a temperature range of -40°C to +85°C.

  8. Q: What type of package does NCP5359DR2G come in? A: NCP5359DR2G is available in a small and compact DFN (Dual Flat No-Lead) package.

  9. Q: Can NCP5359DR2G be used in automotive applications? A: Yes, NCP5359DR2G is AEC-Q100 qualified, making it suitable for automotive applications.

  10. Q: Are there any evaluation boards or reference designs available for NCP5359DR2G? A: Yes, ON Semiconductor provides evaluation boards and reference designs to help users quickly prototype and implement NCP5359DR2G in their applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.