ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
NCV78763MW1R2G
Lihat Butiran Helaian data

NCV78763MW1R2G - English Editing Encyclopedia Entry

Product Overview

Product Name: NCV78763MW1R2G
Category: Integrated Circuit
Use: Automotive Power Management IC
Characteristics: High efficiency, compact size, advanced protection features
Package: PowerSO-10 package
Essence: Power management solution for automotive applications
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Operating Temperature Range: -40°C to +125°C
  • Quiescent Current: 20µA (typical)

Detailed Pin Configuration

The NCV78763MW1R2G has the following pin configuration:

  1. VBAT: Battery voltage input
  2. VDD: IC power supply input
  3. GND: Ground reference
  4. EN: Enable pin for device operation
  5. INH: Inhibit pin for device shutdown
  6. VOUT: Regulated output voltage
  7. PGND: Power ground reference
  8. FB: Feedback pin for voltage regulation
  9. SS: Soft-start capacitor connection
  10. COMP: Compensation pin for stability control

Functional Features

  • Integrated high-side and low-side drivers
  • Overvoltage and undervoltage protection
  • Overcurrent and short-circuit protection
  • Thermal shutdown protection
  • Adjustable output voltage through external resistors
  • Soft-start function for controlled startup
  • Fault diagnostic and reporting capabilities

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Compact size for space-constrained applications - Advanced protection features ensure system reliability - Wide input voltage range for compatibility with various automotive systems

Disadvantages: - Limited maximum output current of 3A - Requires external components for voltage adjustment

Working Principles

The NCV78763MW1R2G is a power management IC designed for automotive applications. It integrates high-side and low-side drivers, allowing efficient control of power delivery to various automotive subsystems. The IC operates within a wide input voltage range of 4.5V to 40V, making it suitable for use in different automotive systems.

The device regulates the output voltage through feedback control using an external resistor network connected to the FB pin. It provides advanced protection features such as overvoltage, undervoltage, overcurrent, and short-circuit protection, ensuring safe operation under various conditions. Additionally, the IC incorporates thermal shutdown protection to prevent damage due to excessive temperature.

The NCV78763MW1R2G also includes a soft-start function that allows controlled startup, reducing inrush current and minimizing stress on the system. Fault diagnostic and reporting capabilities enable efficient troubleshooting and system maintenance.

Detailed Application Field Plans

The NCV78763MW1R2G is widely used in automotive power management applications, including:

  1. Electric power steering systems
  2. Engine control units (ECUs)
  3. Transmission control modules
  4. Lighting systems (LED headlights, taillights)
  5. Infotainment systems
  6. Advanced driver-assistance systems (ADAS)
  7. Battery management systems (BMS)

Its compact size and high efficiency make it suitable for space-constrained automotive designs, while its advanced protection features ensure reliable operation in harsh environments.

Detailed and Complete Alternative Models

  1. NCV78763MW1R2G-A: Similar specifications and features, but with extended temperature range (-40°C to +150°C).
  2. NCV78763MW1R2G-B: Higher maximum output current of 5A, suitable for power-hungry automotive applications.
  3. NCV78763MW1R2G-C: Lower quiescent current of 10µA, ideal for energy-efficient automotive systems.

These alternative models offer variations in temperature range, output current, and quiescent current to cater to different application requirements.

Word count: 511 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NCV78763MW1R2G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of NCV78763MW1R2G in technical solutions:

Q1: What is NCV78763MW1R2G? A1: NCV78763MW1R2G is a specific model of integrated circuit (IC) designed for use in automotive applications, particularly in power management and control systems.

Q2: What are the key features of NCV78763MW1R2G? A2: Some key features of NCV78763MW1R2G include high voltage capability, multiple power outputs, built-in protection mechanisms, and compatibility with various automotive communication protocols.

Q3: In which technical solutions can NCV78763MW1R2G be used? A3: NCV78763MW1R2G can be used in various technical solutions such as electric power steering systems, transmission control units, engine management systems, and lighting control modules.

Q4: How does NCV78763MW1R2G contribute to power management in automotive applications? A4: NCV78763MW1R2G provides efficient power conversion, regulation, and distribution capabilities, allowing for optimized power management in automotive systems, leading to improved performance and energy efficiency.

Q5: Does NCV78763MW1R2G support communication protocols commonly used in automotive systems? A5: Yes, NCV78763MW1R2G supports popular automotive communication protocols like LIN (Local Interconnect Network) and SENT (Single Edge Nibble Transmission).

Q6: What protection mechanisms are built into NCV78763MW1R2G? A6: NCV78763MW1R2G incorporates various protection mechanisms such as overvoltage protection, overcurrent protection, thermal shutdown, and short-circuit protection to ensure the safety and reliability of automotive systems.

Q7: Can NCV78763MW1R2G operate in high voltage environments? A7: Yes, NCV78763MW1R2G is designed to operate in high voltage environments commonly found in automotive applications, making it suitable for use in such systems.

Q8: Are there any specific design considerations when using NCV78763MW1R2G? A8: It is important to consider factors like thermal management, PCB layout, and proper decoupling to ensure optimal performance and reliability when designing with NCV78763MW1R2G.

Q9: What are the typical applications of NCV78763MW1R2G in electric power steering systems? A9: NCV78763MW1R2G can be used in electric power steering systems to control motor drive, monitor sensor inputs, and provide power supply for various components within the system.

Q10: Where can I find more information about NCV78763MW1R2G and its application in technical solutions? A10: You can refer to the datasheet, application notes, and technical documentation provided by the manufacturer of NCV78763MW1R2G for detailed information on its features, specifications, and application guidelines.