Panasonic Electronic Components
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ERZ-E11A561CS
Lihat Butiran Helaian data

ERZ-E11A561CS Product Overview

Introduction

The ERZ-E11A561CS is a component belonging to the category of electronic passive components. It is commonly used for surge protection in various electronic circuits and systems. This entry will provide an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Passive Component
  • Use: Surge Protection
  • Characteristics: High surge current capability, fast response time
  • Package: Ceramic disc
  • Essence: Protects electronic circuits from voltage surges
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Model: ERZ-E11A561CS
  • Voltage Rating: 560V
  • Maximum Surge Current: 20kA
  • Response Time: <25ns
  • Operating Temperature Range: -40°C to 85°C
  • Dimensions: 11mm diameter

Detailed Pin Configuration

The ERZ-E11A561CS typically has two leads for connection. The pin configuration is as follows: - Pin 1: Connection point 1 - Pin 2: Connection point 2

Functional Features

  • Provides surge protection by diverting excess voltage to the ground
  • Fast response time ensures minimal impact on the protected circuit
  • High surge current capability allows for reliable protection in high-energy environments

Advantages and Disadvantages

Advantages

  • Effective surge protection
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Limited to surge protection and does not address other power quality issues
  • Requires proper installation for optimal performance

Working Principles

The ERZ-E11A561CS operates based on the principle of shunting excess voltage to the ground when a surge occurs. This helps to protect sensitive electronic components from damage caused by overvoltage events.

Detailed Application Field Plans

The ERZ-E11A561CS is commonly used in the following applications: - Power distribution systems - Telecommunication equipment - Industrial control systems - Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to the ERZ-E11A561CS include: - ERZ-E11A511CS: Lower voltage rating - ERZ-E11A621CS: Higher voltage rating - ERZ-E11A561CM: Surface mount version

In conclusion, the ERZ-E11A561CS is a vital component in providing surge protection for electronic circuits and systems. Its fast response time and high surge current capability make it suitable for a wide range of applications, despite its limitations. Understanding its specifications, pin configuration, functional features, and alternative models is essential for effective utilization in various electronic systems.

Word count: 398

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ERZ-E11A561CS dalam penyelesaian teknikal

  1. What is ERZ-E11A561CS?

    • ERZ-E11A561CS is a type of varistor, also known as a voltage-dependent resistor, which is used to protect electronic circuits from overvoltage conditions.

  2. What are the key features of ERZ-E11A561CS?

    • The key features of ERZ-E11A561CS include high surge current capability, fast response time, and low leakage current.

  3. How does ERZ-E11A561CS protect electronic circuits?

    • ERZ-E11A561CS protects electronic circuits by rapidly changing its resistance in response to overvoltage conditions, thereby diverting excess current away from sensitive components.

  4. What are the typical applications of ERZ-E11A561CS?

    • ERZ-E11A561CS is commonly used in power supplies, industrial equipment, telecommunication devices, and automotive electronics to provide overvoltage protection.

  5. What is the operating voltage range of ERZ-E11A561CS?

    • The operating voltage range of ERZ-E11A561CS is typically from 470V to 560V.

  6. How should ERZ-E11A561CS be connected in a circuit?

    • ERZ-E11A561CS should be connected in parallel with the load or component that needs to be protected from overvoltage events.

  7. What is the maximum energy absorption capability of ERZ-E11A561CS?

    • The maximum energy absorption capability of ERZ-E11A561CS is typically specified in joules and represents the amount of energy it can dissipate during an overvoltage event.

  8. Can ERZ-E11A561CS be used in outdoor applications?

    • Yes, ERZ-E11A561CS is designed to withstand outdoor environmental conditions and can be used in outdoor applications such as outdoor lighting systems and solar inverters.

  9. What are the temperature specifications for ERZ-E11A561CS?

    • ERZ-E11A561CS is typically rated for a wide operating temperature range, making it suitable for use in both hot and cold environments.

  10. Are there any reliability tests or certifications for ERZ-E11A561CS?

    • ERZ-E11A561CS may undergo various reliability tests such as temperature cycling, humidity testing, and surge testing to ensure its performance and reliability in different technical solutions. Additionally, it may have certifications such as UL or TUV for compliance with safety standards.