Power Integrations
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TOP243G-TL
Lihat Butiran Helaian data

TOP243G-TL

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Standby Power, Wide Input Voltage Range
  • Package: TO-220-7C
  • Essence: Switching Power Supply Controller
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage: 85VAC to 265VAC
  • Output Power: Up to 45W
  • Switching Frequency: 66 kHz to 132 kHz
  • Operating Temperature: -40°C to +150°C
  • Protection Features: Overload Protection, Overvoltage Protection, Overtemperature Protection

Detailed Pin Configuration

The TOP243G-TL IC has the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. FB: Feedback pin for regulating output voltage
  4. COMP: Compensation pin for loop stability
  5. DRAIN: High-voltage power MOSFET drain connection
  6. SOURCE: High-voltage power MOSFET source connection
  7. CONTROL: Control pin for ON/OFF and frequency modulation

Functional Features

  • Primary-Side Regulation (PSR) control eliminates optocoupler or secondary-side feedback circuitry
  • Auto-restart protection for fault conditions such as output short-circuit or open-loop
  • Frequency jittering reduces EMI emissions
  • Built-in soft-start limits inrush current during startup
  • Green-mode operation for low standby power consumption

Advantages and Disadvantages

Advantages

  • High efficiency resulting in reduced power dissipation
  • Wide input voltage range allows for universal AC input compatibility
  • Compact TO-220-7C package for easy integration into various applications
  • Comprehensive protection features ensure safe operation

Disadvantages

  • Requires external components for complete power supply implementation
  • Limited output power compared to higher-rated ICs in the same category

Working Principles

The TOP243G-TL is a switching power supply controller that utilizes primary-side regulation (PSR) control. It operates by modulating the duty cycle of the internal power MOSFET to regulate the output voltage. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle accordingly. The control pin (CONTROL) provides ON/OFF control and frequency modulation.

Detailed Application Field Plans

The TOP243G-TL is commonly used in various applications, including:

  1. AC/DC Adapters
  2. LED Lighting
  3. Set-Top Boxes
  4. Audio Amplifiers
  5. Industrial Power Supplies

Detailed and Complete Alternative Models

Some alternative models to the TOP243G-TL include:

  1. TOP244G-TL
  2. TOP245G-TL
  3. TOP246G-TL
  4. TOP247G-TL

These models offer similar functionality and characteristics but may have different specifications or package options.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TOP243G-TL dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TOP243G-TL in technical solutions:

  1. Q: What is TOP243G-TL? A: TOP243G-TL is a highly integrated offline switcher IC (integrated circuit) designed for low power applications.

  2. Q: What are the typical applications of TOP243G-TL? A: TOP243G-TL is commonly used in various applications such as auxiliary power supplies, battery chargers, LED lighting, and industrial control systems.

  3. Q: What is the input voltage range supported by TOP243G-TL? A: The input voltage range of TOP243G-TL is typically between 85VAC and 265VAC.

  4. Q: What is the maximum output power that can be achieved with TOP243G-TL? A: The maximum output power depends on the specific design and operating conditions, but it can typically reach up to 30 watts.

  5. Q: Does TOP243G-TL require an external MOSFET? A: Yes, TOP243G-TL requires an external MOSFET to handle the switching of the power supply.

  6. Q: Can TOP243G-TL operate in continuous or discontinuous mode? A: TOP243G-TL can operate in both continuous and discontinuous modes depending on the load and operating conditions.

  7. Q: What are the key protection features of TOP243G-TL? A: TOP243G-TL includes various protection features such as overvoltage protection, overload protection, and thermal shutdown.

  8. Q: Is TOP243G-TL suitable for high-frequency operation? A: Yes, TOP243G-TL is designed for high-frequency operation, typically in the range of 50 kHz to 500 kHz.

  9. Q: Can TOP243G-TL be used in both isolated and non-isolated power supply designs? A: Yes, TOP243G-TL can be used in both isolated and non-isolated power supply designs depending on the specific requirements of the application.

  10. Q: Are there any reference designs or application notes available for TOP243G-TL? A: Yes, Power Integrations, the manufacturer of TOP243G-TL, provides various reference designs and application notes that can help in implementing the IC effectively in different technical solutions.

Please note that the answers provided here are general and may vary based on specific design considerations and requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.