RT9080-18GJ5
Product Overview
Category
The RT9080-18GJ5 belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and devices.
Characteristics
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage: 1.8V
- Maximum Output Current: 500mA
- Low Dropout Voltage: 300mV at 500mA
- Low Quiescent Current: 75μA
- Thermal Shutdown Protection
Package
The RT9080-18GJ5 comes in a small, surface-mount package.
Essence
The essence of the RT9080-18GJ5 lies in its ability to provide stable and regulated output voltage for various electronic applications.
Packaging/Quantity
The RT9080-18GJ5 is typically available in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage: 1.8V
- Output Current: 500mA
- Dropout Voltage: 300mV at 500mA
- Quiescent Current: 75μA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The RT9080-18GJ5 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. NC (No Connection) 5. VOUT (Output Voltage)
Functional Features
- Low Dropout Voltage
- Low Quiescent Current
- Thermal Shutdown Protection
- Short Circuit Protection
- Reverse Polarity Protection
Advantages and Disadvantages
Advantages
- Stable and regulated output voltage
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
Disadvantages
- Limited maximum output current (500mA)
- Restricted input voltage range (2.5V to 5.5V)
Working Principles
The RT9080-18GJ5 operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.
Detailed Application Field Plans
The RT9080-18GJ5 is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the RT9080-18GJ5 include: - RT8008-33GB - RT9013-18GB - RT9167-18GB
In conclusion, the RT9080-18GJ5 is a versatile voltage regulator with a wide range of applications and features that make it an essential component in modern electronic devices.
Word Count: 410
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi RT9080-18GJ5 dalam penyelesaian teknikal
Sure, here are 10 common questions and answers related to the application of RT9080-18GJ5 in technical solutions:
What is the input voltage range for RT9080-18GJ5?
- The input voltage range for RT9080-18GJ5 is 2.5V to 5.5V.
What is the output voltage of RT9080-18GJ5?
- The output voltage of RT9080-18GJ5 is fixed at 1.8V.
What is the maximum output current of RT9080-18GJ5?
- The maximum output current of RT9080-18GJ5 is 500mA.
What is the typical dropout voltage of RT9080-18GJ5?
- The typical dropout voltage of RT9080-18GJ5 is 300mV at 300mA load.
What are the typical applications for RT9080-18GJ5?
- Typical applications for RT9080-18GJ5 include portable devices, battery-powered equipment, and post regulators for switching supplies.
What is the operating temperature range for RT9080-18GJ5?
- The operating temperature range for RT9080-18GJ5 is -40°C to 85°C.
Does RT9080-18GJ5 have built-in thermal shutdown protection?
- Yes, RT9080-18GJ5 has built-in thermal shutdown protection to prevent damage from excessive heat.
Is RT9080-18GJ5 available in a small package size?
- Yes, RT9080-18GJ5 is available in a small SOT-23-5 package.
Can RT9080-18GJ5 be used in low-power IoT devices?
- Yes, RT9080-18GJ5 is suitable for use in low-power IoT devices due to its low quiescent current and small form factor.
Are there any recommended input/output capacitors for RT9080-18GJ5?
- It is recommended to use a 1μF ceramic capacitor on the input and a 1μF ceramic capacitor on the output for stability and noise reduction.
I hope these questions and answers are helpful for your technical solutions involving RT9080-18GJ5!