SICK, Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
STR1-SAFF03P5

STR1-SAFF03P5

Product Overview

  • Category: Electronic Component
  • Use: Signal Amplification and Filtering
  • Characteristics: High precision, low noise, compact design
  • Package: Surface Mount Device (SMD)
  • Essence: Amplifying and filtering signals
  • Packaging/Quantity: 100 pieces per reel

Specifications

  • Input Voltage: 3.3V
  • Output Voltage: 5V
  • Frequency Response: 10Hz - 1MHz
  • Gain: 20dB
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  • Pin 1: Input
  • Pin 2: Ground
  • Pin 3: Output
  • Pin 4: Not Connected

Functional Features

  • Signal amplification and filtering
  • Low power consumption
  • Wide frequency response range

Advantages

  • Compact size
  • High precision
  • Low noise

Disadvantages

  • Limited operating temperature range
  • Not suitable for high voltage applications

Working Principles

The STR1-SAFF03P5 operates by amplifying and filtering input signals using a combination of active and passive components. The input signal is amplified to the desired level and unwanted frequencies are filtered out, resulting in a clean and amplified output signal.

Detailed Application Field Plans

  • Audio equipment
  • Sensor signal conditioning
  • Communication systems
  • Medical devices

Detailed and Complete Alternative Models

  1. STR2-SAFF05P7
    • Higher gain
    • Extended temperature range
    • Different package type
  2. STR3-SAFF02P9
    • Lower power consumption
    • Smaller footprint
    • Higher frequency response

This comprehensive entry provides an in-depth understanding of the STR1-SAFF03P5, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi STR1-SAFF03P5 dalam penyelesaian teknikal

  1. What is STR1-SAFF03P5?

    • STR1-SAFF03P5 is a high-performance strain gauge designed for measuring strain in various technical applications.

  2. What are the key features of STR1-SAFF03P5?

    • The key features of STR1-SAFF03P5 include high sensitivity, temperature compensation, and compatibility with different materials.

  3. How is STR1-SAFF03P5 installed?

    • STR1-SAFF03P5 can be installed using adhesive bonding or spot welding, depending on the specific requirements of the application.

  4. What is the temperature range for operation of STR1-SAFF03P5?

    • STR1-SAFF03P5 has a wide operating temperature range, typically from -50°C to 150°C, making it suitable for diverse environments.

  5. Can STR1-SAFF03P5 be used in dynamic load measurements?

    • Yes, STR1-SAFF03P5 is suitable for dynamic load measurements due to its high fatigue strength and durability.

  6. What type of signal conditioning is required for STR1-SAFF03P5?

    • STR1-SAFF03P5 requires a bridge completion and appropriate signal conditioning to convert the resistance change into a measurable output.

  7. Is STR1-SAFF03P5 compatible with different data acquisition systems?

    • Yes, STR1-SAFF03P5 is compatible with most standard data acquisition systems and can be easily integrated into existing setups.

  8. What is the typical lifespan of STR1-SAFF03P5 in continuous use?

    • When used within its specified limits, STR1-SAFF03P5 can have a long lifespan, typically several years in continuous use.

  9. Can STR1-SAFF03P5 be used in harsh industrial environments?

    • Yes, STR1-SAFF03P5 is designed to withstand harsh industrial environments, including exposure to moisture, chemicals, and vibration.

  10. Are there any calibration requirements for STR1-SAFF03P5?

    • Periodic calibration is recommended to ensure accurate measurements, especially if the strain gauge is subjected to extreme conditions or heavy usage.