Silicon Labs
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SI5338C-B06813-GMR
Lihat Butiran Helaian data

SI5338C-B06813-GMR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Clock Generator and Multiplier
  • Characteristics:
    • High-frequency performance
    • Low jitter
    • Programmable output frequencies
    • Flexible input/output options
  • Package: QFN-68
  • Essence: Clock generation and multiplication
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications and Parameters

  • Input Voltage Range: 2.375V to 3.63V
  • Output Frequency Range: 1kHz to 945MHz
  • Operating Temperature Range: -40°C to +85°C
  • Supply Current: 150mA (typical)

Detailed and Complete Pin Configuration

The SI5338C-B06813-GMR features a total of 68 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDDO | Output Power Supply Voltage | | 2 | VDD | Core Power Supply Voltage | | 3 | GND | Ground | | ... | ... | ... | | 68 | NC | No Connect |

Functional Characteristics

  • Clock Generation: The SI5338C-B06813-GMR can generate multiple clock signals with programmable frequencies.
  • Clock Multiplication: It can multiply the input clock frequency to provide higher-frequency output clocks.
  • Jitter Reduction: The IC minimizes jitter, ensuring accurate timing in various applications.
  • Flexible I/O Options: It supports various input and output configurations, including LVCMOS, LVDS, and LVPECL.

Advantages and Disadvantages

Advantages: - High-frequency performance allows for precise timing requirements. - Low jitter ensures reliable synchronization in sensitive applications. - Programmable output frequencies offer flexibility for different system requirements.

Disadvantages: - Limited input voltage range may restrict compatibility with certain systems. - Complex pin configuration may require careful attention during circuit design.

Applicable Range of Products

The SI5338C-B06813-GMR is suitable for a wide range of applications, including: - Telecommunications equipment - Data centers and network switches - Industrial automation systems - Test and measurement instruments - Consumer electronics

Working Principles

The IC utilizes advanced clock synthesis techniques to generate and multiply clock signals. It incorporates a phase-locked loop (PLL) to achieve precise frequency control and minimize jitter. The programmable nature of the device allows for customization according to specific application requirements.

Detailed Application Field Plans

  1. Telecommunications Equipment: The SI5338C-B06813-GMR can be used in base stations, routers, and switches to provide accurate timing for data transmission and synchronization.
  2. Data Centers and Network Switches: It ensures reliable clocking for high-speed data processing and networking equipment, improving overall system performance.
  3. Industrial Automation Systems: The IC enables precise timing in industrial control systems, facilitating synchronized operation and enhancing efficiency.
  4. Test and Measurement Instruments: It offers stable and accurate clock signals for precise measurements in scientific and engineering instruments.
  5. Consumer Electronics: The SI5338C-B06813-GMR can be utilized in various consumer devices, such as smart TVs, gaming consoles, and audio/video equipment, to ensure proper synchronization and timing.

Detailed Alternative Models

  1. SI5338A-B06813-GMR: Similar to SI5338C-B06813-GMR but with additional features for specific applications.
  2. SI5338B-B06813-GMR: A lower-cost variant with slightly reduced performance specifications.
  3. SI5339C-B06813-GMR: An upgraded version with improved jitter performance and extended frequency range.

5 Common Technical Questions and Answers

  1. Q: What is the maximum output frequency of the SI5338C-B06813-GMR? A: The maximum output frequency is 945MHz.

  2. Q: Can I use a 3.3V power supply for this IC? A: Yes, the input voltage range supports 3.3V power supplies.

  3. Q: Does the SI5338C-B06813-GMR support LVDS outputs? A: Yes, it supports LVDS, as well as other common output types like LVCMOS and LVPECL.

  4. Q: What is the typical supply current required by this IC? A: The typical supply current is 150mA.

  5. Q: Can I use this IC in automotive applications? A: No, the operating temperature range of -40°C to +85°C may not be suitable for automotive environments.

This encyclopedia entry provides an overview of the SI5338C-B06813-GMR, including its basic information, specifications, pin configuration, functional characteristics, advantages, disadvantages