P51-100-A-L-P-4.5V-000-000
Product Category: Electronic Component
Use: The P51-100-A-L-P-4.5V-000-000 is a precision pressure sensor designed for use in various industrial and commercial applications. It is commonly used in automotive, aerospace, and medical equipment.
Characteristics: This sensor is known for its high accuracy, reliability, and durability. It is designed to operate effectively in harsh environments and can withstand extreme temperatures and pressures. The package is compact and lightweight, making it suitable for integration into small-scale electronic systems.
Essence: The essence of the P51-100-A-L-P-4.5V-000-000 lies in its ability to provide precise and consistent pressure measurements, contributing to the efficiency and safety of the systems in which it is employed.
Packaging/Quantity: The sensor is typically packaged individually in protective casing to ensure safe transportation and handling. It is available in various quantities to accommodate different production and project requirements.
Specifications: - Pressure Range: 0-100 psi - Output: 4.5V - Accuracy: ±1% - Operating Temperature: -40°C to 125°C - Supply Voltage: 5VDC - Response Time: <1ms
Detailed Pin Configuration: The P51-100-A-L-P-4.5V-000-000 features a standard pin configuration with clearly labeled input, output, and power pins. The pinout is as follows: 1. Vcc (Power) 2. GND (Ground) 3. Output 4. N/C (Not Connected)
Functional Features: - High precision pressure sensing - Robust construction for harsh environments - Fast response time - Low power consumption - Wide operating temperature range
Advantages: - Accurate and reliable pressure measurements - Suitable for demanding industrial applications - Compact and lightweight design - Compatible with various electronic systems - Long-term stability
Disadvantages: - Limited pressure range compared to some other sensors - Requires careful calibration for optimal performance
Working Principles: The P51-100-A-L-P-4.5V-000-000 operates on the principle of piezoresistive sensing, where changes in pressure cause a corresponding change in electrical resistance. This change is then converted into a voltage output, providing an accurate representation of the applied pressure.
Detailed Application Field Plans: 1. Automotive: Used for tire pressure monitoring systems, fuel injection systems, and engine management. 2. Aerospace: Employed in aircraft hydraulic systems, cabin pressure monitoring, and altitude control. 3. Medical Equipment: Integrated into patient monitoring devices, ventilators, and anesthesia machines.
Detailed and Complete Alternative Models: 1. P51-200-A-L-P-5V-000-000: Offers a higher pressure range with a 5V output. 2. P51-50-A-L-P-3.3V-000-000: Provides a lower pressure range with a 3.3V output. 3. P51-150-A-L-P-4V-000-000: Offers a wider temperature range with a 4V output.
In conclusion, the P51-100-A-L-P-4.5V-000-000 is a versatile and reliable precision pressure sensor suitable for a wide range of industrial and commercial applications. Its high accuracy, robust construction, and compatibility with various electronic systems make it a preferred choice for engineers and designers seeking dependable pressure measurement solutions.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P51-100-A-L-P-4.5V-000-000 dalam penyelesaian teknikal
What is the application of P51-100-A-L-P-4.5V-000-000?
- The P51-100-A-L-P-4.5V-000-000 is commonly used as a pressure sensor in various technical solutions.
What is the operating voltage of P51-100-A-L-P-4.5V-000-000?
- The operating voltage of P51-100-A-L-P-4.5V-000-000 is 4.5V.
What is the pressure range of P51-100-A-L-P-4.5V-000-000?
- The pressure range of P51-100-A-L-P-4.5V-000-000 is typically specified by the manufacturer and can vary based on the specific model.
Is P51-100-A-L-P-4.5V-000-000 suitable for industrial applications?
- Yes, P51-100-A-L-P-4.5V-000-000 is designed for use in industrial applications due to its robust construction and reliable performance.
What output signal does P51-100-A-L-P-4.5V-000-000 provide?
- P51-100-A-L-P-4.5V-000-000 typically provides a voltage or current output signal proportional to the measured pressure.
Can P51-100-A-L-P-4.5V-000-000 be used in high-temperature environments?
- P51-100-A-L-P-4.5V-000-000 may have options for high-temperature operation, but it's important to check the specifications for the specific model.
What are the typical accuracy specifications for P51-100-A-L-P-4.5V-000-000?
- The accuracy of P51-100-A-L-P-4.5V-000-000 can vary, but it is generally specified by the manufacturer and depends on the specific model and application.
Is P51-100-A-L-P-4.5V-000-000 suitable for use in medical devices?
- P51-100-A-L-P-4.5V-000-000 may have versions designed for use in medical devices, but it's important to verify with the manufacturer for specific medical-grade models.
What is the typical response time of P51-100-A-L-P-4.5V-000-000?
- The response time of P51-100-A-L-P-4.5V-000-000 can vary based on the specific model and application requirements.
Are there any special considerations for installing P51-100-A-L-P-4.5V-000-000?
- It's important to follow the manufacturer's installation guidelines and consider factors such as mounting orientation, environmental conditions, and electrical connections for optimal performance.