SSI Technologies Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
P51-200-A-AF-D-20MA-000-000
Lihat Butiran Helaian data

P51-200-A-AF-D-20MA-000-000

Basic Information Overview

Category

The P51-200-A-AF-D-20MA-000-000 belongs to the category of industrial pressure transducers.

Use

It is used for measuring and transmitting pressure readings in industrial applications.

Characteristics

  • High accuracy
  • Robust construction
  • Wide operating temperature range
  • Long-term stability

Package

The P51-200-A-AF-D-20MA-000-000 is typically packaged in a protective housing with appropriate connectors for installation.

Essence

The essence of this product lies in its ability to accurately and reliably measure pressure in demanding industrial environments.

Packaging/Quantity

The product is usually packaged individually and is available in single units.

Specifications

  • Pressure Range: 0-200 psi
  • Output: 4-20 mA
  • Accuracy: ±0.5% full scale
  • Operating Temperature: -40°C to 85°C
  • Pressure Connection: 1/4" NPT male

Detailed Pin Configuration

The detailed pin configuration of the P51-200-A-AF-D-20MA-000-000 is as follows: - Pin 1: Power Supply (+) - Pin 2: Power Supply (-) - Pin 3: Signal Output - Pin 4: Not Connected

Functional Features

  • High precision measurement
  • Compatibility with industrial control systems
  • Built-in temperature compensation
  • Overpressure protection

Advantages

  • Reliable and accurate pressure measurement
  • Suitable for harsh industrial environments
  • Easy integration into existing systems
  • Long-term stability

Disadvantages

  • Higher initial cost compared to some alternatives
  • May require specialized knowledge for installation and calibration

Working Principles

The P51-200-A-AF-D-20MA-000-000 operates on the principle of strain gauge technology, where changes in pressure cause deformation in the sensing element, resulting in a proportional change in electrical resistance. This change is then converted into a standardized output signal.

Detailed Application Field Plans

The P51-200-A-AF-D-20MA-000-000 is commonly used in various industrial applications such as: - Hydraulic systems - Process control - Industrial machinery - HVAC systems - Energy management

Detailed and Complete Alternative Models

Some alternative models to the P51-200-A-AF-D-20MA-000-000 include: - P51-100-A-AF-D-20MA-000-000 (0-100 psi range) - P51-300-A-AF-D-20MA-000-000 (0-300 psi range) - P51-500-A-AF-D-20MA-000-000 (0-500 psi range)

In conclusion, the P51-200-A-AF-D-20MA-000-000 is a highly reliable and accurate industrial pressure transducer suitable for a wide range of applications, offering precise measurement and robust construction for demanding industrial environments.

[Word count: 413]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P51-200-A-AF-D-20MA-000-000 dalam penyelesaian teknikal

  1. What is the P51-200-A-AF-D-20MA-000-000 used for?

    • The P51-200-A-AF-D-20MA-000-000 is a pressure transducer commonly used to measure and transmit pressure readings in various technical solutions.

  2. What is the operating range of the P51-200-A-AF-D-20MA-000-000?

    • The operating range of the P51-200-A-AF-D-20MA-000-000 is typically specified by the manufacturer and can vary, but it is commonly used for measuring pressures within the range of 0-200 psi.

  3. How does the P51-200-A-AF-D-20MA-000-000 interface with control systems?

    • The P51-200-A-AF-D-20MA-000-000 typically outputs a 4-20mA signal, which can be easily interfaced with most control systems for monitoring and control purposes.

  4. What are the environmental considerations for using the P51-200-A-AF-D-20MA-000-000?

    • The P51-200-A-AF-D-20MA-000-000 is designed to operate within specific temperature and humidity ranges, and it's important to consider these factors when integrating it into technical solutions.

  5. Can the P51-200-A-AF-D-20MA-000-000 be used in hazardous environments?

    • Depending on the model and specifications, the P51-200-A-AF-D-20MA-000-000 may be available in intrinsically safe or explosion-proof versions suitable for use in hazardous environments.

  6. What are the typical applications for the P51-200-A-AF-D-20MA-000-000?

    • The P51-200-A-AF-D-20MA-000-000 is commonly used in industrial automation, HVAC systems, hydraulic systems, and other technical solutions where pressure measurement is critical.

  7. How do I calibrate the P51-200-A-AF-D-20MA-000-000?

    • Calibration procedures for the P51-200-A-AF-D-20MA-000-000 should follow the manufacturer's guidelines and may involve adjusting zero and span settings to ensure accurate pressure readings.

  8. What are the maintenance requirements for the P51-200-A-AF-D-20MA-000-000?

    • Regular inspection, cleaning, and calibration are important for maintaining the accuracy and reliability of the P51-200-A-AF-D-20MA-000-000 in technical solutions.

  9. Can the P51-200-A-AF-D-20MA-000-000 be integrated with digital communication protocols?

    • Some models of the P51-200-A-AF-D-20MA-000-000 may support digital communication protocols such as Modbus or HART, allowing for seamless integration with digital control systems.

  10. Where can I find technical specifications and documentation for the P51-200-A-AF-D-20MA-000-000?

    • Technical specifications, installation guides, and other documentation for the P51-200-A-AF-D-20MA-000-000 can typically be obtained from the manufacturer's website or customer support.