SSI Technologies Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
P51-750-A-L-D-20MA-000-000
Lihat Butiran Helaian data

P51-750-A-L-D-20MA-000-000 Product Overview

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Processing and Control
  • Characteristics: High precision, compact design, reliable performance
  • Package: Surface mount
  • Essence: Precision resistor
  • Packaging/Quantity: Tape and reel, 1000 pieces per reel

Specifications

  • Resistance: 750 ohms
  • Tolerance: ±0.01%
  • Power Rating: 0.25 watts
  • Temperature Coefficient: ±5 ppm/°C
  • Operating Temperature Range: -55°C to +125°C

Detailed Pin Configuration

The P51-750-A-L-D-20MA-000-000 has a dual in-line package with two leads on each side, totaling four pins. The pin configuration is as follows: 1. Pin 1: Input 2. Pin 2: Output 3. Pin 3: Not connected 4. Pin 4: Common

Functional Features

  • High precision and stability
  • Low temperature coefficient
  • Compact size for space-constrained applications
  • Suitable for precision signal processing and control circuits

Advantages and Disadvantages

Advantages

  • Exceptional precision and accuracy
  • Reliable performance over a wide temperature range
  • Compact and easy to integrate into circuit designs

Disadvantages

  • Higher cost compared to standard resistors
  • Sensitive to electrostatic discharge (ESD)

Working Principles

The P51-750-A-L-D-20MA-000-000 operates based on the principle of converting electrical energy into heat, thereby providing precise resistance to control current flow and voltage levels within a circuit.

Detailed Application Field Plans

The P51-750-A-L-D-20MA-000-000 is commonly used in the following applications: - Precision measurement equipment - Instrumentation and control systems - Medical devices - Aerospace and defense electronics - Automotive electronics

Detailed and Complete Alternative Models

  • P51-500-A-L-D-20MA-000-000: 500 ohm precision resistor
  • P51-1000-A-L-D-20MA-000-000: 1000 ohm precision resistor
  • P51-750-B-L-D-20MA-000-000: 750 ohm precision resistor with different tolerance

This comprehensive entry provides detailed information about the P51-750-A-L-D-20MA-000-000, covering its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P51-750-A-L-D-20MA-000-000 dalam penyelesaian teknikal

  1. What is the P51-750-A-L-D-20MA-000-000?

    • The P51-750-A-L-D-20MA-000-000 is a pressure transducer designed for industrial and technical applications to measure pressure and convert it into an electrical signal.

  2. What is the operating range of the P51-750-A-L-D-20MA-000-000?

    • The operating range of the P51-750-A-L-D-20MA-000-000 is typically from 0 to 750 psi, making it suitable for a wide range of industrial pressure measurement needs.

  3. What are the key features of the P51-750-A-L-D-20MA-000-000?

    • The key features of the P51-750-A-L-D-20MA-000-000 include high accuracy, rugged construction, compatibility with various media, and a 4-20mA output signal.

  4. How can the P51-750-A-L-D-20MA-000-000 be installed?

    • The P51-750-A-L-D-20MA-000-000 can be installed using standard NPT fittings or other compatible installation methods based on the specific application requirements.

  5. What are the typical applications for the P51-750-A-L-D-20MA-000-000?

    • Typical applications for the P51-750-A-L-D-20MA-000-000 include hydraulic systems, industrial machinery, process control, and HVAC systems.

  6. Is the P51-750-A-L-D-20MA-000-000 suitable for use in harsh environments?

    • Yes, the P51-750-A-L-D-20MA-000-000 is designed to withstand harsh industrial environments and is available in various configurations to meet specific environmental challenges.

  7. What kind of calibration does the P51-750-A-L-D-20MA-000-000 require?

    • The P51-750-A-L-D-20MA-000-000 may require periodic calibration to ensure accurate pressure measurements, and this can be performed using standard calibration equipment.

  8. Can the P51-750-A-L-D-20MA-000-000 be integrated with control systems?

    • Yes, the 4-20mA output signal of the P51-750-A-L-D-20MA-000-000 makes it compatible with most control systems and data acquisition devices.

  9. What maintenance is required for the P51-750-A-L-D-20MA-000-000?

    • The P51-750-A-L-D-20MA-000-000 generally requires minimal maintenance, but regular inspection and cleaning of the sensing element may be necessary in certain applications.

  10. Does the P51-750-A-L-D-20MA-000-000 come with any certifications?

    • The P51-750-A-L-D-20MA-000-000 may come with certifications such as CE, RoHS, and others, depending on the specific model and application requirements.