STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
M74HC4050RM13TR
Lihat Butiran Helaian data

M74HC4050RM13TR

Introduction

The M74HC4050RM13TR belongs to the category of integrated circuits and is commonly used for signal processing and voltage level shifting. This device is known for its high-speed operation, low power consumption, and compatibility with various logic levels. The M74HC4050RM13TR is available in a standard SO-14 package and is widely used in digital applications.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Signal Processing, Voltage Level Shifting
  • Characteristics: High-speed operation, Low power consumption
  • Package: SO-14
  • Essence: Digital signal processing
  • Packaging/Quantity: Standard packaging

Specifications

  • Supply Voltage Range: 2V to 6V
  • High-Level Input Voltage: 3.15V (Min) to 6V (Max)
  • Low-Level Input Voltage: 0V (Max) to 1.65V (Min)
  • Output Voltage: 0V to Vcc
  • Propagation Delay: 14ns (Typical) at 4.5V
  • Operating Temperature Range: -55°C to 125°C

Detailed Pin Configuration

The M74HC4050RM13TR features the following pin configuration: 1. A 2. B 3. C 4. D 5. E 6. F 7. GND 8. H 9. I 10. J 11. K 12. L 13. M 14. Vcc

Functional Features

  • High-speed CMOS technology
  • Wide voltage range compatibility
  • Inverting buffer with high noise immunity
  • Direct interface with TTL levels
  • Balanced propagation delays

Advantages and Disadvantages

Advantages

  • High-speed operation
  • Low power consumption
  • Compatibility with various logic levels
  • Wide operating temperature range

Disadvantages

  • Limited output drive capability
  • Sensitivity to electrostatic discharge

Working Principles

The M74HC4050RM13TR operates on the principles of CMOS technology, utilizing a series of inverters to process and shift voltage levels. It provides a reliable and efficient means of interfacing between different logic families while maintaining high-speed performance and low power consumption.

Detailed Application Field Plans

The M74HC4050RM13TR finds extensive application in the following fields: - Digital signal processing - Voltage level shifting - Logic level conversion - Signal isolation

Detailed and Complete Alternative Models

Some alternative models to the M74HC4050RM13TR include: - CD4504BM96 - SN74LVC04ADR - MC74VHCU04DTR2G - TC7SZ04FU

In conclusion, the M74HC4050RM13TR is a versatile integrated circuit that offers high-speed operation, low power consumption, and wide voltage range compatibility. Its application spans across various digital and voltage level shifting scenarios, making it an essential component in modern electronic systems.

[Word Count: 411]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi M74HC4050RM13TR dalam penyelesaian teknikal

  1. What is the M74HC4050RM13TR used for?

    • The M74HC4050RM13TR is a hex non-inverting buffer/convertor that can be used to convert high-level logic signals to lower levels and vice versa.

  2. What is the maximum voltage the M74HC4050RM13TR can handle?

    • The M74HC4050RM13TR can handle a maximum voltage of 6V.

  3. What is the typical operating frequency range for the M74HC4050RM13TR?

    • The typical operating frequency range for the M74HC4050RM13TR is from DC to 25 MHz.

  4. Can the M74HC4050RM13TR be used as a level shifter?

    • Yes, the M74HC4050RM13TR can be used as a level shifter to convert between different logic voltage levels.

  5. What is the input capacitance of the M74HC4050RM13TR?

    • The input capacitance of the M74HC4050RM13TR is typically 3.5pF.

  6. Is the M74HC4050RM13TR suitable for use in automotive applications?

    • Yes, the M74HC4050RM13TR is suitable for use in automotive applications as it meets the necessary standards for automotive electronics.

  7. What is the power consumption of the M74HC4050RM13TR?

    • The power consumption of the M74HC4050RM13TR is typically very low, making it suitable for battery-powered applications.

  8. Can the M74HC4050RM13TR be used in industrial control systems?

    • Yes, the M74HC4050RM13TR can be used in industrial control systems due to its robustness and reliability.

  9. Does the M74HC4050RM13TR have built-in ESD protection?

    • Yes, the M74HC4050RM13TR has built-in ESD protection, making it more resilient to electrostatic discharge events.

  10. What are the typical applications for the M74HC4050RM13TR?

    • Typical applications for the M74HC4050RM13TR include level shifting, signal buffering, waveform shaping, and interfacing between different logic families.