STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TL1431ACL3T
Lihat Butiran Helaian data

TL1431ACL3T

Product Overview

Category

The TL1431ACL3T belongs to the category of voltage references.

Use

It is commonly used as a precision shunt regulator in various electronic circuits.

Characteristics

  • High precision: The TL1431ACL3T provides accurate voltage reference with low temperature coefficient.
  • Adjustable output: It allows for adjustable output voltage through external resistors.
  • Low power consumption: The device operates at low power, making it suitable for battery-powered applications.
  • Wide operating range: It can operate within a wide voltage range, typically from 2.5V to 36V.
  • Temperature stability: The TL1431ACL3T exhibits excellent temperature stability over a wide temperature range.

Package

The TL1431ACL3T is available in a small surface-mount SOT-23 package.

Essence

The essence of TL1431ACL3T lies in its ability to provide a stable and precise voltage reference for various electronic circuits.

Packaging/Quantity

The TL1431ACL3T is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Reference Voltage: 2.5V to 36V
  • Output Current: Up to 100mA
  • Temperature Coefficient: ±50ppm/°C
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23

Detailed Pin Configuration

The TL1431ACL3T has three pins:

  1. Anode (A): Connected to the positive supply voltage.
  2. Cathode (K): Connected to the ground or negative supply voltage.
  3. Adjust (ADJ): Connected to an external resistor network to adjust the output voltage.

Functional Features

  • Voltage Regulation: The TL1431ACL3T maintains a stable output voltage regardless of input voltage variations.
  • Adjustable Output: The output voltage can be adjusted by connecting external resistors to the ADJ pin.
  • Current Limiting: It incorporates current limiting protection to prevent excessive current flow.

Advantages and Disadvantages

Advantages

  • High precision and stability
  • Adjustable output voltage
  • Low power consumption
  • Wide operating range
  • Compact package size

Disadvantages

  • Limited output current capacity (up to 100mA)
  • Requires external resistor network for voltage adjustment

Working Principles

The TL1431ACL3T operates based on the principle of a shunt regulator. It compares the reference voltage with the feedback voltage obtained from the external resistor network connected to the ADJ pin. By adjusting the resistance values, the output voltage can be precisely regulated.

Detailed Application Field Plans

The TL1431ACL3T finds applications in various electronic systems, including:

  1. Power Supplies: It is used as a voltage reference in power supply circuits to ensure stable output voltages.
  2. Battery Charging Systems: The TL1431ACL3T helps regulate the charging voltage in battery charging systems, preventing overcharging.
  3. Instrumentation: It is utilized in precision measurement instruments where accurate voltage references are required.
  4. Audio Amplifiers: The device ensures consistent biasing and stability in audio amplifier circuits.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TL1431ACL3T include:

  1. LM431: Manufactured by Texas Instruments, it is a popular adjustable precision shunt regulator.
  2. LT1236: Produced by Linear Technology, it provides high-precision voltage references with low temperature drift.
  3. MAX6126: A voltage reference IC from Maxim Integrated, known for its exceptional accuracy and stability.

These alternative models can be considered depending on specific application requirements.

Word count: 530 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TL1431ACL3T dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TL1431ACL3T in technical solutions:

Q1: What is TL1431ACL3T? A1: TL1431ACL3T is a precision shunt regulator that can be used in various technical applications.

Q2: What is the voltage reference range of TL1431ACL3T? A2: The voltage reference range of TL1431ACL3T is typically between 2.5V and 36V.

Q3: How does TL1431ACL3T regulate voltage? A3: TL1431ACL3T regulates voltage by acting as a shunt regulator, diverting excess current away from the load.

Q4: Can TL1431ACL3T be used for overvoltage protection? A4: Yes, TL1431ACL3T can be used for overvoltage protection by setting the reference voltage to the desired threshold.

Q5: What is the typical output current capability of TL1431ACL3T? A5: The typical output current capability of TL1431ACL3T is around 100mA.

Q6: Is TL1431ACL3T suitable for low-power applications? A6: Yes, TL1431ACL3T is suitable for low-power applications due to its low quiescent current consumption.

Q7: Can TL1431ACL3T be used in battery charging circuits? A7: Yes, TL1431ACL3T can be used in battery charging circuits to regulate the charging voltage.

Q8: Does TL1431ACL3T require an external voltage divider? A8: Yes, TL1431ACL3T requires an external voltage divider to set the desired reference voltage.

Q9: Can TL1431ACL3T operate in temperature-sensitive environments? A9: Yes, TL1431ACL3T has a wide operating temperature range and can operate in temperature-sensitive environments.

Q10: What are some common applications of TL1431ACL3T? A10: Some common applications of TL1431ACL3T include voltage regulation, overvoltage protection, battery charging circuits, and low-power applications.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.