STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TSM103AID
Lihat Butiran Helaian data

TSM103AID

Product Overview

Category

TSM103AID belongs to the category of integrated circuits (ICs).

Use

The TSM103AID is commonly used as a voltage reference in various electronic applications.

Characteristics

  • High precision: The TSM103AID offers exceptional accuracy in voltage references.
  • Low power consumption: It operates efficiently with minimal power requirements.
  • Wide temperature range: The device can function reliably across a broad temperature spectrum.
  • Small form factor: The TSM103AID is designed to be compact, making it suitable for space-constrained applications.

Package

The TSM103AID is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of the TSM103AID lies in its ability to provide a stable and accurate voltage reference for electronic systems.

Packaging/Quantity

The TSM103AID is typically packaged in reels or tubes, with each containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Voltage Reference Type: Fixed
  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.5%
  • Temperature Coefficient: ±50ppm/°C
  • Operating Temperature Range: -40°C to +125°C
  • Supply Voltage Range: 2.7V to 10V
  • Quiescent Current: 60µA

Detailed Pin Configuration

The TSM103AID features a standard 8-pin configuration:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. NC: No Connection
  4. NC: No Connection
  5. NC: No Connection
  6. VIN: Input Voltage
  7. NC: No Connection
  8. NC: No Connection

Functional Features

  • Stable output voltage: The TSM103AID provides a consistent and reliable output voltage.
  • Low output impedance: It exhibits low impedance characteristics, ensuring minimal voltage fluctuations.
  • Short-circuit protection: The device incorporates built-in protection against short circuits, enhancing its durability.
  • Low dropout voltage: The TSM103AID maintains a low voltage drop between the input and output.

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low power consumption
  • Wide temperature range
  • Compact form factor

Disadvantages

  • Limited output voltage options
  • Relatively higher cost compared to some alternatives

Working Principles

The TSM103AID operates based on the principle of bandgap voltage reference. It utilizes a combination of internal circuitry and feedback mechanisms to generate a stable output voltage regardless of changes in temperature or supply voltage.

Detailed Application Field Plans

The TSM103AID finds applications in various electronic systems, including but not limited to: - Power supplies - Data acquisition systems - Industrial control systems - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

  1. LM4040: This voltage reference IC offers similar precision and accuracy as the TSM103AID. It is available in different output voltage options.
  2. REF3025: With a low dropout voltage and high accuracy, this alternative model is suitable for applications with tight voltage requirements.
  3. MAX619: This IC provides excellent temperature stability and low power consumption, making it an ideal alternative for energy-efficient designs.

Please note that the above list is not exhaustive, and there are several other alternative models available in the market.

Word count: 498 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TSM103AID dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TSM103AID in technical solutions:

  1. Q: What is TSM103AID? A: TSM103AID is a specific integrated circuit (IC) used for voltage monitoring and supervision in technical solutions.

  2. Q: What is the purpose of TSM103AID? A: The purpose of TSM103AID is to monitor and supervise voltage levels in various applications, ensuring stable and reliable operation.

  3. Q: What voltage range does TSM103AID support? A: TSM103AID supports a wide voltage range typically from 2.5V to 36V, making it suitable for various power supply systems.

  4. Q: How does TSM103AID provide voltage monitoring? A: TSM103AID provides voltage monitoring by comparing the input voltage with a reference voltage and generating an output signal based on the comparison result.

  5. Q: Can TSM103AID be used for overvoltage protection? A: Yes, TSM103AID can be used for overvoltage protection by setting the reference voltage to the desired threshold and triggering an action when the input voltage exceeds that threshold.

  6. Q: Is TSM103AID suitable for battery-powered applications? A: Yes, TSM103AID is suitable for battery-powered applications as it has low quiescent current consumption, helping to conserve battery life.

  7. Q: Can TSM103AID be used for undervoltage detection? A: Absolutely, TSM103AID can be used for undervoltage detection by setting the reference voltage to the desired threshold and triggering an action when the input voltage falls below that threshold.

  8. Q: Does TSM103AID have any built-in protection features? A: Yes, TSM103AID has built-in protection features like thermal shutdown and reverse battery protection, ensuring safe operation in various conditions.

  9. Q: What is the output configuration of TSM103AID? A: TSM103AID provides an open-drain output, which allows for flexibility in connecting to other components or systems.

  10. Q: Can TSM103AID be used in automotive applications? A: Yes, TSM103AID is suitable for automotive applications as it meets the necessary requirements for voltage monitoring and supervision in automotive systems.

Please note that these answers are general and may vary depending on the specific implementation and datasheet of TSM103AID.