STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
VN7016AJTR
Lihat Butiran Helaian data

VN7016AJTR

Product Overview

Category: Integrated Circuit (IC)

Use: The VN7016AJTR is a high-side driver IC designed for automotive applications. It is specifically used to control the switching of loads in automotive systems, such as lamps, motors, and solenoids.

Characteristics: - High voltage capability - Low standby current consumption - Overtemperature protection - Short-circuit protection - ESD protection

Package: The VN7016AJTR is available in a small surface mount package, commonly known as PowerSSO-12. This package provides excellent thermal performance and allows for easy integration into automotive electronic systems.

Essence: The essence of the VN7016AJTR lies in its ability to provide reliable and efficient control of high-side loads in automotive applications.

Packaging/Quantity: The VN7016AJTR is typically packaged in reels, with 2500 units per reel.

Specifications

  • Supply Voltage Range: 4.5V to 36V
  • Output Current: 1.5A
  • On-state Resistance: 0.3Ω
  • Standby Current: 10μA
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The VN7016AJTR features a 12-pin configuration:

  1. VCC: Supply voltage input
  2. IN: Input control signal
  3. EN: Enable pin
  4. GND: Ground
  5. OUT: Output pin
  6. OUT: Output pin
  7. OUT: Output pin
  8. OUT: Output pin
  9. OUT: Output pin
  10. OUT: Output pin
  11. OUT: Output pin
  12. OUT: Output pin

Functional Features

  • High-side load switching
  • Overtemperature protection
  • Short-circuit protection
  • ESD protection
  • Low standby current consumption

Advantages and Disadvantages

Advantages: - High voltage capability allows for use in a wide range of automotive applications - Overtemperature and short-circuit protection ensure safe operation - Low standby current consumption minimizes power loss - ESD protection enhances reliability

Disadvantages: - Limited output current may not be suitable for high-power applications

Working Principles

The VN7016AJTR operates by receiving an input control signal (IN) to enable or disable the high-side load switching. When the input signal is high, the IC turns on the internal MOSFET, allowing current to flow through the load. Conversely, when the input signal is low, the IC turns off the MOSFET, cutting off the current flow.

Detailed Application Field Plans

The VN7016AJTR is widely used in various automotive applications, including: - Automotive lighting systems - Motor control systems - Solenoid control systems - Power distribution modules

Detailed and Complete Alternative Models

  1. VN7016AJ-E: Similar to VN7016AJTR, but with extended temperature range (-40°C to +175°C)
  2. VN7016AJTR-E: Similar to VN7016AJTR, but with extended temperature range (-40°C to +175°C) and enhanced ESD protection

These alternative models provide similar functionality and can be used as substitutes for the VN7016AJTR in specific application requirements.

Word count: 391 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi VN7016AJTR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of VN7016AJTR in technical solutions:

  1. Q: What is VN7016AJTR? A: VN7016AJTR is a specific model of a high-side driver IC used for controlling loads in automotive and industrial applications.

  2. Q: What is the maximum voltage rating of VN7016AJTR? A: The maximum voltage rating of VN7016AJTR is typically 36V.

  3. Q: What is the maximum current rating of VN7016AJTR? A: The maximum current rating of VN7016AJTR is typically 0.5A.

  4. Q: Can VN7016AJTR be used for both automotive and industrial applications? A: Yes, VN7016AJTR is designed to be suitable for both automotive and industrial applications.

  5. Q: What is the purpose of using VN7016AJTR in technical solutions? A: VN7016AJTR is commonly used as a high-side switch to control various loads such as lamps, motors, solenoids, and valves.

  6. Q: Does VN7016AJTR have built-in protection features? A: Yes, VN7016AJTR includes built-in protection features like over-temperature protection, over-current protection, and short-circuit protection.

  7. Q: Can VN7016AJTR handle PWM (Pulse Width Modulation) signals? A: Yes, VN7016AJTR can handle PWM signals and is suitable for applications that require precise load control.

  8. Q: What is the operating temperature range of VN7016AJTR? A: The operating temperature range of VN7016AJTR is typically -40°C to +150°C.

  9. Q: Is VN7016AJTR available in different package options? A: Yes, VN7016AJTR is available in a variety of package options, such as SO-8 and DPAK.

  10. Q: Can VN7016AJTR be used in high-voltage applications? A: No, VN7016AJTR is specifically designed for low to medium voltage applications and is not suitable for high-voltage applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.