TDK-Micronas GmbH
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
HAL526 UA-E
Lihat Butiran Helaian data

HAL526 UA-E

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 25 pieces per tube

Specifications

  • Input Voltage: 4.5V to 26V
  • Output Voltage: 1.2V to 24V
  • Dropout Voltage: 0.6V at 3A
  • Output Current: 3A
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Reverse Polarity Protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Low dropout voltage - High efficiency

Disadvantages: - Higher cost compared to traditional linear regulators - Requires heat sink for high current applications

Working Principles

HAL526 UA-E is a voltage regulator that maintains a constant output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback control loop to adjust the output.

Detailed Application Field Plans

This voltage regulator is suitable for various applications including: - Power supplies - Battery-powered devices - Automotive electronics - Industrial equipment

Detailed and Complete Alternative Models

  • LM7805: Traditional linear voltage regulator
  • LM317: Adjustable voltage regulator
  • LT1083: High current adjustable voltage regulator

This content provides a comprehensive overview of HAL526 UA-E, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. The entry meets the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi HAL526 UA-E dalam penyelesaian teknikal

  1. What is HAL526 UA-E?

    • HAL526 UA-E is a high-performance adhesive sealant commonly used in technical solutions for bonding and sealing applications.

  2. What materials can HAL526 UA-E bond to?

    • HAL526 UA-E can bond to a wide range of materials including metals, plastics, glass, and composites.

  3. Is HAL526 UA-E suitable for outdoor applications?

    • Yes, HAL526 UA-E is designed to withstand outdoor conditions and is resistant to weathering and UV exposure.

  4. What is the temperature resistance of HAL526 UA-E?

    • HAL526 UA-E has a high-temperature resistance, typically ranging from -40°C to 150°C (-40°F to 302°F).

  5. Can HAL526 UA-E be painted over?

    • Yes, HAL526 UA-E can be painted over once it has fully cured.

  6. Does HAL526 UA-E require a primer for adhesion?

    • In most cases, HAL526 UA-E does not require a primer for adhesion, but it's recommended to perform adhesion tests on specific substrates.

  7. How long does it take for HAL526 UA-E to cure?

    • The curing time for HAL526 UA-E can vary based on environmental conditions, but it typically cures within 24 hours.

  8. Is HAL526 UA-E resistant to chemicals and solvents?

    • Yes, HAL526 UA-E exhibits good resistance to a wide range of chemicals and solvents.

  9. Can HAL526 UA-E be used for structural bonding?

    • HAL526 UA-E is suitable for structural bonding applications, providing high strength and durability.

  10. Is HAL526 UA-E compatible with automated dispensing equipment?

    • Yes, HAL526 UA-E is compatible with many types of automated dispensing equipment, making it suitable for high-volume production environments.