Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74FCT162H245ATPACT
Lihat Butiran Helaian data

Encyclopedia Entry: 74FCT162H245ATPACT

Product Information

Category

The 74FCT162H245ATPACT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for data transmission and signal conversion in various electronic devices and systems.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Robust design for reliable performance
  • Compatibility with various logic families

Package

The 74FCT162H245ATPACT is available in a compact and durable package, designed to protect the integrated circuit from external factors such as moisture and physical damage.

Essence

The essence of this product lies in its ability to efficiently transfer data between different components of an electronic system while maintaining signal integrity and minimizing power consumption.

Packaging/Quantity

The 74FCT162H245ATPACT is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

  • Operating Voltage Range: 2.0V to 5.5V
  • Input/Output Compatibility: TTL, CMOS
  • Data Transfer Rate: Up to 200 Mbps
  • Number of Channels: 16
  • Logic Family: FCT
  • Output Drive Strength: Standard
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74FCT162H245ATPACT has a total of 48 pins, which are assigned specific functions. Here is a detailed pin configuration:

  1. A1
  2. B1
  3. GND
  4. B2
  5. A2
  6. OE#
  7. Y1
  8. Y2
  9. VCC
  10. A3
  11. B3
  12. GND
  13. B4
  14. A4
  15. OE#
  16. Y3
  17. Y4
  18. VCC
  19. A5
  20. B5
  21. GND
  22. B6
  23. A6
  24. OE#
  25. Y5
  26. Y6
  27. VCC
  28. A7
  29. B7
  30. GND
  31. B8
  32. A8
  33. OE#
  34. Y7
  35. Y8
  36. VCC
  37. A9
  38. B9
  39. GND
  40. B10
  41. A10
  42. OE#
  43. Y9
  44. Y10
  45. VCC
  46. A11
  47. B11
  48. GND

Functional Features

  • Bidirectional data transfer capability
  • Output enable/disable control for flexible operation
  • High-speed data transmission with minimal delay
  • Wide operating voltage range allows compatibility with various systems
  • Robust design ensures reliable performance in different environments

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transfer
  • Low power consumption for energy-efficient applications
  • Compatibility with multiple logic families enhances versatility
  • Robust design ensures reliability in challenging conditions

Disadvantages

  • Limited number of channels may restrict certain applications requiring a higher channel count
  • Higher cost compared to some alternative models with similar functionality

Working Principles

The 74FCT162H245ATPACT operates based on the principles of digital logic circuits. It utilizes a combination of transistors, resistors, and other electronic components to facilitate bidirectional data transfer between input and output pins. The IC's internal circuitry ensures proper signal conversion and amplification, allowing for reliable data transmission.

Detailed Application Field Plans

The 74FCT162H245ATPACT finds applications in various electronic systems, including but not limited to:

  1. Communication equipment
  2. Computer peripherals
  3. Industrial automation systems
  4. Automotive electronics
  5. Consumer electronics
  6. Medical devices

In communication equipment, this IC can be used for data routing and signal conversion between different modules. In computer peripherals, it enables efficient data transfer between the computer and external devices. Industrial automation systems benefit from its ability to interface different components and sensors. Automotive electronics utilize this IC for signal conditioning and data transmission. Consumer electronics such as smartphones and tablets employ it for efficient data transfer within the device. Medical devices rely on this IC for accurate data acquisition and transmission.

Detailed and Complete Alternative Models

  1. 74HC245: This alternative model offers similar functionality with a lower cost, but operates at a slightly slower speed.
  2. SN74LV245A: This alternative model operates at a lower voltage range, making it suitable for low-power applications.
  3. CD74ACT245: This alternative model provides higher drive strength, allowing

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74FCT162H245ATPACT dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74FCT162H245ATPACT in technical solutions:

  1. Q: What is the purpose of the 74FCT162H245ATPACT?

    • A: The 74FCT162H245ATPACT is a bidirectional octal bus transceiver used for voltage level translation and signal buffering.

  2. Q: What is the maximum operating frequency of the 74FCT162H245ATPACT?

    • A: The maximum operating frequency of this transceiver is typically around 200 MHz.

  3. Q: Can the 74FCT162H245ATPACT handle different voltage levels on its input and output sides?

    • A: Yes, it can handle voltage level translation between different logic families, such as TTL and CMOS.

  4. Q: How many data lines can the 74FCT162H245ATPACT handle?

    • A: It can handle up to 8 bidirectional data lines.

  5. Q: Does the 74FCT162H245ATPACT have any built-in protection features?

    • A: Yes, it has built-in ESD protection diodes to safeguard against electrostatic discharge.

  6. Q: What is the power supply voltage range for this transceiver?

    • A: The recommended power supply voltage range is typically between 4.5V and 5.5V.

  7. Q: Can the 74FCT162H245ATPACT be used in both parallel and serial communication systems?

    • A: Yes, it can be used in both parallel and serial communication systems depending on the application requirements.

  8. Q: Is the 74FCT162H245ATPACT compatible with standard logic families?

    • A: Yes, it is compatible with various standard logic families such as TTL, CMOS, and LVTTL.

  9. Q: What is the typical propagation delay of this transceiver?

    • A: The typical propagation delay is around 3 ns.

  10. Q: Can the 74FCT162H245ATPACT be used in high-speed data transfer applications?

    • A: Yes, it can be used in high-speed data transfer applications due to its fast switching speed and low propagation delay.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.