Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADS1291IPBSR
Lihat Butiran Helaian data

ADS1291IPBSR

Product Overview

  • Category: Integrated Circuits
  • Use: Analog Front End for Biopotential Measurements
  • Characteristics: High-resolution, low-power, small package size
  • Package: 20-pin TSSOP
  • Essence: Provides amplification and filtering of biopotential signals
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resolution: 24 bits
  • Sampling Rate: Up to 32 kSPS (samples per second)
  • Input Channels: 1
  • Input Voltage Range: ±2.5V
  • Power Supply: 2.7V to 5.25V
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ADS1291IPBSR has a total of 20 pins. The pin configuration is as follows:

  1. VREFP: Positive reference voltage input
  2. VREFN: Negative reference voltage input
  3. AVDD: Analog power supply
  4. DVDD: Digital power supply
  5. CLK: Clock input
  6. DRDY: Data ready output
  7. START: Start conversion input
  8. PWDN: Power-down input
  9. RESET: Reset input
  10. TEST: Test mode input
  11. GND: Ground
  12. CH1N: Channel 1 negative input
  13. CH1P: Channel 1 positive input
  14. NC: No connect
  15. NC: No connect
  16. NC: No connect
  17. NC: No connect
  18. NC: No connect
  19. NC: No connect
  20. NC: No connect

Functional Features

  • High-resolution analog-to-digital conversion
  • Low-power consumption for battery-powered applications
  • Integrated amplification and filtering for biopotential measurements
  • Flexible power supply options
  • Digital interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages

  • High-resolution measurement of biopotential signals
  • Low-power operation extends battery life
  • Small package size allows for compact designs
  • Easy integration with microcontrollers

Disadvantages

  • Limited to single-channel measurements
  • Requires external components for signal conditioning
  • Higher cost compared to simpler analog front-end solutions

Working Principles

The ADS1291IPBSR is an analog front end designed for biopotential measurements. It amplifies and filters the weak electrical signals generated by the human body, such as electrocardiogram (ECG) or electromyogram (EMG) signals. The device uses a high-resolution analog-to-digital converter (ADC) to convert the amplified signals into digital data that can be processed by a microcontroller or other digital systems.

Detailed Application Field Plans

The ADS1291IPBSR is commonly used in various medical and healthcare applications, including:

  1. Electrocardiography (ECG) monitoring devices
  2. Electromyography (EMG) systems for muscle activity analysis
  3. Sleep monitoring equipment for sleep disorder diagnosis
  4. Portable health monitoring devices for remote patient monitoring
  5. Fitness trackers and wearable devices for heart rate monitoring

Alternative Models

  • ADS1292IPBSR: Similar to ADS1291IPBSR but with dual-channel capability
  • ADS1293IPBSR: Similar to ADS1291IPBSR but with three-channel capability
  • ADS1294IPBSR: Similar to ADS1291IPBSR but with four-channel capability

These alternative models offer increased channel count for applications requiring simultaneous measurement from multiple biopotential sources.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADS1291IPBSR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADS1291IPBSR in technical solutions:

Q1: What is ADS1291IPBSR? A1: ADS1291IPBSR is a high-resolution, low-power, 24-bit analog-to-digital converter (ADC) specifically designed for bio-potential measurements.

Q2: What are the key features of ADS1291IPBSR? A2: Some key features include low power consumption, high resolution, integrated amplifiers, flexible input multiplexing, and built-in lead-off detection capability.

Q3: What are the typical applications of ADS1291IPBSR? A3: ADS1291IPBSR is commonly used in medical devices such as electrocardiograms (ECGs), electroencephalograms (EEGs), and electromyograms (EMGs). It can also be used in other bio-potential measurement systems.

Q4: How many channels does ADS1291IPBSR support? A4: ADS1291IPBSR supports a single channel for bio-potential measurements.

Q5: What is the input voltage range of ADS1291IPBSR? A5: The input voltage range of ADS1291IPBSR is typically ±2.048V.

Q6: Does ADS1291IPBSR have built-in noise filtering capabilities? A6: Yes, ADS1291IPBSR has programmable digital filters that can be used to reduce noise and improve signal quality.

Q7: Can ADS1291IPBSR detect electrode lead-off conditions? A7: Yes, ADS1291IPBSR has built-in lead-off detection circuitry to detect electrode lead-off conditions.

Q8: What is the power supply requirement for ADS1291IPBSR? A8: ADS1291IPBSR requires a single power supply voltage in the range of 2.7V to 5.25V.

Q9: Is ADS1291IPBSR compatible with microcontrollers and digital signal processors (DSPs)? A9: Yes, ADS1291IPBSR has a serial peripheral interface (SPI) that allows easy integration with microcontrollers and DSPs.

Q10: Are there any evaluation boards or development kits available for ADS1291IPBSR? A10: Yes, Texas Instruments provides evaluation boards and development kits that can help in the prototyping and development of applications using ADS1291IPBSR.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.