Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CD4094BNSR
Lihat Butiran Helaian data

CD4094BNSR

Product Overview

Category

CD4094BNSR belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a shift register and storage device in various electronic applications.

Characteristics

  • CD4094BNSR is a CMOS-based IC.
  • It operates at a wide voltage range, typically between 3V and 18V.
  • The IC has a high noise immunity and low power consumption.
  • It offers a wide operating temperature range, making it suitable for various environments.

Package

CD4094BNSR is available in a small outline package (SOIC) with 16 pins.

Essence

The essence of CD4094BNSR lies in its ability to perform serial-to-parallel data conversion and parallel data storage functions.

Packaging/Quantity

CD4094BNSR is typically sold in reels or tubes, with each reel containing 2500 units.

Specifications

  • Supply Voltage: 3V to 18V
  • Input Voltage: 0V to VDD
  • Output Voltage: 0V to VDD
  • Operating Temperature Range: -55°C to +125°C
  • Maximum Clock Frequency: 5 MHz
  • Maximum Power Dissipation: 500 mW

Detailed Pin Configuration

  1. Serial Data Input (SER)
  2. Serial Data Output (Q7S)
  3. Clock Input (CLK)
  4. Strobe Input (STR)
  5. Reset Input (MR)
  6. Output Enable Input (OE)
  7. Parallel Data Output (Q0)
  8. Parallel Data Output (Q1)
  9. Parallel Data Output (Q2)
  10. Parallel Data Output (Q3)
  11. Parallel Data Output (Q4)
  12. Parallel Data Output (Q5)
  13. Parallel Data Output (Q6)
  14. VDD (Positive Power Supply)
  15. Ground (GND)
  16. Serial Data Output (Q7)

Functional Features

  • CD4094BNSR can be cascaded to achieve a larger number of parallel outputs.
  • It has a built-in shift register and latch, allowing for easy data storage.
  • The IC supports both serial and parallel data transfer modes.
  • It offers a wide operating voltage range, making it compatible with various systems.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High noise immunity
  • Wide operating temperature range
  • Easy integration into electronic circuits
  • Versatile functionality

Disadvantages

  • Limited maximum clock frequency
  • Requires external components for certain applications
  • Not suitable for high-speed data transfer

Working Principles

CD4094BNSR operates based on the principle of sequential data shifting and parallel data storage. When a clock signal is applied, the input data is shifted through the shift register. Upon receiving a strobe signal, the shifted data is latched and stored in the parallel output registers. This allows for efficient data transfer and storage.

Detailed Application Field Plans

CD4094BNSR finds applications in various fields, including:

  1. LED Displays: The IC can be used to control multiple LEDs in a display system, enabling dynamic lighting effects.
  2. Serial-to-Parallel Conversion: It is commonly employed in systems where serial data needs to be converted into parallel data for further processing.
  3. Data Storage: CD4094BNSR can store data temporarily or permanently, making it useful in memory applications.
  4. Industrial Automation: The IC is utilized in automation systems for controlling and monitoring devices.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to CD4094BNSR are:

  1. 74HC595: This IC also functions as a shift register and storage device, with a similar pin configuration.
  2. CD4015: It is a dual 4-stage static shift register, suitable for applications requiring multiple shift registers.
  3. SN74LS164: This IC is a parallel-out serial shift register, commonly used in digital systems.

These alternative models can be considered based on specific requirements and compatibility with the system design.

Word count: 554 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CD4094BNSR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CD4094BNSR in technical solutions:

  1. Q: What is CD4094BNSR? A: CD4094BNSR is a shift register IC (Integrated Circuit) that can be used for serial-to-parallel data conversion.

  2. Q: What is the maximum clock frequency supported by CD4094BNSR? A: The maximum clock frequency supported by CD4094BNSR is typically around 5 MHz.

  3. Q: How many parallel outputs does CD4094BNSR have? A: CD4094BNSR has 8 parallel outputs, which can be used to control external devices or drive LEDs.

  4. Q: Can CD4094BNSR be cascaded to increase the number of outputs? A: Yes, CD4094BNSR can be cascaded to increase the number of outputs by connecting the serial output of one chip to the serial input of another.

  5. Q: What is the power supply voltage range for CD4094BNSR? A: CD4094BNSR operates with a power supply voltage range of 3V to 18V.

  6. Q: Does CD4094BNSR support both CMOS and TTL logic levels? A: Yes, CD4094BNSR is compatible with both CMOS and TTL logic levels.

  7. Q: Can CD4094BNSR be used for level shifting applications? A: Yes, CD4094BNSR can be used for level shifting applications as it supports different logic voltage levels.

  8. Q: What is the typical power consumption of CD4094BNSR? A: The typical power consumption of CD4094BNSR is around 10mW.

  9. Q: Can CD4094BNSR be used in both parallel and serial data input modes? A: Yes, CD4094BNSR can be used in both parallel and serial data input modes, depending on the application requirements.

  10. Q: What are some common applications of CD4094BNSR? A: CD4094BNSR is commonly used in applications such as LED displays, digital clocks, shift registers, and control systems.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.