Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CLVC2G125IDCURQ1
Lihat Butiran Helaian data

CLVC2G125IDCURQ1

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter
  • Characteristics: Bi-directional voltage level translator with automatic direction sensing
  • Package: 8-pin VSSOP package
  • Essence: Translates signals between two different voltage domains
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • High-level Input Voltage (VIH): 0.7 x VCC to VCC + 0.3V
  • Low-level Input Voltage (VIL): -0.3V to 0.3 x VCC
  • Output Voltage Range: 1.65V to 3.6V
  • Maximum Output Current: ±24mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The CLVC2G125IDCURQ1 has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | A1 | Channel A input/output | | 2 | GND | Ground | | 3 | B1 | Channel B input/output | | 4 | OE | Output Enable | | 5 | VCCB | Channel B supply voltage | | 6 | B2 | Channel B input/output | | 7 | GND | Ground | | 8 | A2 | Channel A input/output |

Functional Features

  • Bi-directional voltage level translation between two voltage domains
  • Automatic direction sensing eliminates the need for direction control signals
  • Supports bidirectional data transfer
  • Low power consumption
  • Fast switching speed
  • ESD protection on all pins

Advantages

  • Simplifies interfacing between devices operating at different voltage levels
  • Eliminates the need for additional level shifting components
  • Automatic direction sensing simplifies system design
  • Provides reliable and efficient voltage level translation

Disadvantages

  • Limited to a specific voltage range (1.65V to 3.6V)
  • May not be suitable for applications requiring higher voltage translation

Working Principles

The CLVC2G125IDCURQ1 is designed using CMOS technology and operates by translating signals between two different voltage domains. It automatically senses the direction of the signal and performs the necessary level shifting. The device uses a combination of MOSFETs and control logic to achieve bidirectional voltage level translation.

Detailed Application Field Plans

The CLVC2G125IDCURQ1 can be used in various applications where voltage level translation is required. Some potential application fields include: - Communication systems - Industrial automation - Consumer electronics - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

  • SN74LVC2G125: Similar bi-directional voltage level translator from Texas Instruments
  • NC7SZ125: Single gate level shifter from Fairchild Semiconductor
  • 74LVC2T45: Dual supply voltage level translator from NXP Semiconductors
  • FXMA2102: Bi-directional voltage level translator with integrated ESD protection from ON Semiconductor

Note: This list is not exhaustive and there are several other alternative models available in the market.

Word count: 345 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CLVC2G125IDCURQ1 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CLVC2G125IDCURQ1 in technical solutions:

1. What is CLVC2G125IDCURQ1? CLVC2G125IDCURQ1 is a low-voltage configurable dual-gate buffer with 3-state outputs, commonly used in digital logic applications.

2. What is the operating voltage range of CLVC2G125IDCURQ1? The operating voltage range of CLVC2G125IDCURQ1 is typically between 1.65V and 3.6V.

3. What is the maximum output current of CLVC2G125IDCURQ1? The maximum output current of CLVC2G125IDCURQ1 is typically around 24mA.

4. Can CLVC2G125IDCURQ1 be used as a level shifter? Yes, CLVC2G125IDCURQ1 can be used as a level shifter to convert signals between different voltage levels.

5. What is the propagation delay of CLVC2G125IDCURQ1? The propagation delay of CLVC2G125IDCURQ1 is typically around 2.7ns.

6. Is CLVC2G125IDCURQ1 compatible with other logic families? Yes, CLVC2G125IDCURQ1 is compatible with various logic families such as TTL, CMOS, and LVCMOS.

7. Can CLVC2G125IDCURQ1 drive capacitive loads? Yes, CLVC2G125IDCURQ1 can drive moderate capacitive loads without any additional buffering.

8. Does CLVC2G125IDCURQ1 have built-in ESD protection? Yes, CLVC2G125IDCURQ1 has built-in ESD protection, which helps protect the device from electrostatic discharge.

9. What is the package type of CLVC2G125IDCURQ1? CLVC2G125IDCURQ1 is available in a small SOT-23-8 package.

10. Can CLVC2G125IDCURQ1 be used in automotive applications? Yes, CLVC2G125IDCURQ1 is specifically designed for automotive applications and meets the necessary automotive standards.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.