Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CLVCH16T245MDGVREP
Lihat Butiran Helaian data

CLVCH16T245MDGVREP

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Level Shifter
  • Characteristics: High-speed, bidirectional voltage level translator
  • Package: 48-pin TSSOP
  • Essence: Translates signals between different voltage domains
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range (A Port): 0V to VCCA
  • Input Voltage Range (B Port): 0V to VCCB
  • Output Voltage Range (A Port): 0V to VCCA
  • Output Voltage Range (B Port): 0V to VCCB
  • Maximum Data Rate: 100 Mbps
  • Number of Channels: 16

Detailed Pin Configuration

The CLVCH16T245MDGVREP has a total of 48 pins. The pin configuration is as follows:

  • Pin 1: A1
  • Pin 2: A2
  • Pin 3: A3
  • ...
  • Pin 46: B14
  • Pin 47: B15
  • Pin 48: GND

Functional Features

  • Bidirectional voltage level translation between two voltage domains
  • Supports high-speed data transmission up to 100 Mbps
  • Provides 16 channels for simultaneous signal translation
  • Low power consumption
  • ESD protection on all pins

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Multiple channels for simultaneous translation - Low power consumption

Disadvantages: - Limited supply voltage range (1.2V to 3.6V) - Maximum data rate limited to 100 Mbps

Working Principles

The CLVCH16T245MDGVREP is designed to translate signals between two voltage domains. It operates by receiving input signals from one voltage domain (A Port) and translating them to the corresponding voltage levels of the other voltage domain (B Port), and vice versa. The bidirectional nature of the IC allows for seamless communication between devices operating at different voltage levels.

Detailed Application Field Plans

The CLVCH16T245MDGVREP is commonly used in various applications where signal level shifting is required. Some of the typical application fields include:

  1. Communication Systems: Used to interface between different voltage domains in communication systems, such as UART, SPI, I2C, and GPIO interfaces.
  2. Industrial Automation: Enables communication between devices operating at different voltage levels in industrial automation systems.
  3. Consumer Electronics: Facilitates signal translation in consumer electronic devices, including smartphones, tablets, and gaming consoles.
  4. Automotive Electronics: Used in automotive applications to bridge the gap between different voltage domains in vehicle control systems.
  5. IoT Devices: Enables connectivity and data exchange between IoT devices with varying voltage requirements.

Detailed and Complete Alternative Models

  1. SN74LVCH16T245DGGR: Similar bidirectional voltage level translator with 48-pin TSSOP package.
  2. PCA9306DCUR: Dual bidirectional I2C-bus and SMBus voltage level translator with 8-pin VSSOP package.
  3. TXS0108EPWR: 8-bit bidirectional voltage-level translator with automatic direction sensing and 20-pin TSSOP package.
  4. FXMA2102LX: Dual-channel bidirectional voltage level translator with 10-pin DFN package.
  5. BSS138NL6327XTSA1: Single N-channel logic level enhancement mode field-effect transistor with 3-pin SOT23 package.

(Note: This list is not exhaustive and there are many other alternative models available in the market.)

Word count: 446 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CLVCH16T245MDGVREP dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CLVCH16T245MDGVREP in technical solutions:

1. What is CLVCH16T245MDGVREP? - CLVCH16T245MDGVREP is a high-speed, low-power, 16-bit bus transceiver with 3-state outputs. It is commonly used for bidirectional data transfer between different voltage domains in technical solutions.

2. What voltage levels does CLVCH16T245MDGVREP support? - CLVCH16T245MDGVREP supports voltage levels ranging from 1.2V to 3.6V, making it compatible with a wide range of systems and devices.

3. How many channels does CLVCH16T245MDGVREP have? - CLVCH16T245MDGVREP has 16 channels, allowing for simultaneous bidirectional data transfer on multiple lines.

4. What is the maximum data transfer rate supported by CLVCH16T245MDGVREP? - CLVCH16T245MDGVREP supports high-speed data transfer rates up to 400 Mbps, making it suitable for applications requiring fast and efficient communication.

5. Can CLVCH16T245MDGVREP be used in mixed-voltage systems? - Yes, CLVCH16T245MDGVREP is designed to facilitate data transfer between different voltage domains, making it ideal for use in mixed-voltage systems.

6. Does CLVCH16T245MDGVREP have built-in ESD protection? - Yes, CLVCH16T245MDGVREP features built-in ESD protection, ensuring robustness and reliability in harsh operating conditions.

7. What is the power supply range for CLVCH16T245MDGVREP? - CLVCH16T245MDGVREP operates with a power supply range of 1.65V to 3.6V, providing flexibility in various power supply configurations.

8. Can CLVCH16T245MDGVREP be used in both input and output mode? - Yes, CLVCH16T245MDGVREP can be configured for both input and output mode, allowing bidirectional data transfer between different voltage domains.

9. Does CLVCH16T245MDGVREP support hot-swapping capability? - Yes, CLVCH16T245MDGVREP supports hot-swapping, enabling devices to be connected or disconnected while the system is powered on.

10. What are some typical applications of CLVCH16T245MDGVREP? - CLVCH16T245MDGVREP is commonly used in applications such as level shifting, voltage translation, bus interfacing, and general-purpose data transfer between different voltage domains.

Please note that the specific details and features may vary depending on the manufacturer's specifications and datasheet of CLVCH16T245MDGVREP.