Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CY74FCT573TSOC
Lihat Butiran Helaian data

CY74FCT573TSOC

Overview

  • Category: Integrated Circuit (IC)
  • Use: Data storage and transfer
  • Characteristics: High-speed, low-power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Octal transparent latch with 3-state outputs
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Drive Capability: ±24mA at 4.5V
  • Propagation Delay: 2.5ns (typical)

Pin Configuration

The CY74FCT573TSOC has a total of 20 pins, which are assigned as follows:

  1. GND (Ground)
  2. D0 (Data input 0)
  3. D1 (Data input 1)
  4. D2 (Data input 2)
  5. D3 (Data input 3)
  6. D4 (Data input 4)
  7. D5 (Data input 5)
  8. D6 (Data input 6)
  9. D7 (Data input 7)
  10. OE (Output enable)
  11. LE (Latch enable)
  12. Q0 (Output 0)
  13. Q1 (Output 1)
  14. Q2 (Output 2)
  15. Q3 (Output 3)
  16. Q4 (Output 4)
  17. Q5 (Output 5)
  18. Q6 (Output 6)
  19. Q7 (Output 7)
  20. VCC (Supply voltage)

Functional Features

  • Octal transparent latch with 3-state outputs
  • High-speed operation
  • Low power consumption
  • Non-inverting outputs
  • Output enable and latch enable control signals

Advantages and Disadvantages

Advantages: - High-speed data transfer - Low power consumption - Compact package size - Easy integration into electronic systems

Disadvantages: - Limited output drive capability - Restricted operating temperature range

Working Principles

The CY74FCT573TSOC is an octal transparent latch with 3-state outputs. It allows for the storage and transfer of data in electronic systems. The latch is controlled by the latch enable (LE) signal, which determines whether the inputs are latched or transparently passed to the outputs. The output enable (OE) signal controls the tri-state outputs, enabling or disabling their functionality.

Detailed Application Field Plans

The CY74FCT573TSOC can be used in various applications, including:

  1. Data storage and transfer in microprocessors and microcontrollers.
  2. Address and data bus interfacing in digital systems.
  3. Memory modules and storage devices.
  4. Communication systems and networking equipment.
  5. Industrial automation and control systems.

Detailed and Complete Alternative Models

  1. SN74FCT573T: Similar octal transparent latch with 3-state outputs, offered by Texas Instruments.
  2. MC74FCT573: Octal transparent latch with 3-state outputs, manufactured by ON Semiconductor.
  3. CD74FCT573: Another octal transparent latch with 3-state outputs, produced by Texas Instruments.

These alternative models provide similar functionality and can be considered as substitutes for the CY74FCT573TSOC.

Word count: 366 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CY74FCT573TSOC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CY74FCT573TSOC in technical solutions:

  1. Question: What is the CY74FCT573TSOC?
    Answer: The CY74FCT573TSOC is a octal transparent latch with 3-state outputs, commonly used in digital systems.

  2. Question: What is the maximum operating frequency of the CY74FCT573TSOC?
    Answer: The maximum operating frequency of the CY74FCT573TSOC is typically around 200 MHz.

  3. Question: How many bits can the CY74FCT573TSOC latch?
    Answer: The CY74FCT573TSOC can latch 8 bits of data.

  4. Question: What is the voltage supply range for the CY74FCT573TSOC?
    Answer: The voltage supply range for the CY74FCT573TSOC is typically between 4.5V and 5.5V.

  5. Question: Can the CY74FCT573TSOC be used in both parallel and serial data transfer applications?
    Answer: Yes, the CY74FCT573TSOC can be used in both parallel and serial data transfer applications.

  6. Question: Does the CY74FCT573TSOC support 3-state outputs?
    Answer: Yes, the CY74FCT573TSOC supports 3-state outputs, allowing multiple devices to share a common bus.

  7. Question: What is the power consumption of the CY74FCT573TSOC?
    Answer: The power consumption of the CY74FCT573TSOC is typically low, making it suitable for battery-powered applications.

  8. Question: Can the CY74FCT573TSOC operate at high temperatures?
    Answer: Yes, the CY74FCT573TSOC is designed to operate at high temperatures, typically up to 85°C.

  9. Question: Is the CY74FCT573TSOC compatible with other logic families?
    Answer: Yes, the CY74FCT573TSOC is compatible with a wide range of logic families, including TTL and CMOS.

  10. Question: What are some common applications of the CY74FCT573TSOC?
    Answer: The CY74FCT573TSOC is commonly used in data storage, address decoding, and bus interfacing applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.