Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
DS91C176TMAX
Lihat Butiran Helaian data

DS91C176TMAX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: High-speed differential line driver and receiver
  • Characteristics:
    • Supports data rates up to 400 Mbps
    • Operates with a single 3.3V power supply
    • Compatible with LVDS, LVPECL, CML, and HSTL logic levels
    • Available in a small package for space-constrained applications
  • Package: TSSOP-48
  • Essence: DS91C176TMAX is a high-performance IC used for driving and receiving high-speed differential signals.
  • Packaging/Quantity: Sold in reels of 250 units.

Specifications

  • Data Rate: Up to 400 Mbps
  • Supply Voltage: 3.3V ±10%
  • Operating Temperature Range: -40°C to +85°C
  • Input Common Mode Voltage Range: -0.5V to +2.4V
  • Output Voltage Swing: 350mV (minimum) differential
  • Propagation Delay: 1.8ns (typical)

Pin Configuration

The DS91C176TMAX features a TSSOP-48 package with the following pin configuration:

``` Pin Name Description

1    VCC     Power Supply
2    GND     Ground
3    VREF    Reference Voltage
4    IN1+    Non-Inverting Input 1
5    IN1-    Inverting Input 1
6    OUT1+   Non-Inverting Output 1
7    OUT1-   Inverting Output 1
8    EN1     Enable Input 1
9    NC      No Connection

10 NC No Connection ... ... ... ```

Functional Features

  • High-speed differential line driver and receiver
  • Supports various logic levels (LVDS, LVPECL, CML, HSTL)
  • Low power consumption
  • Wide operating temperature range
  • Small package size for space-constrained applications

Advantages and Disadvantages

Advantages: - High data rate support - Compatibility with multiple logic levels - Low power consumption - Wide operating temperature range

Disadvantages: - Limited pin configuration options - Relatively large package size compared to some alternatives

Working Principles

The DS91C176TMAX is designed to drive and receive high-speed differential signals. It operates by converting single-ended input signals into differential outputs using internal circuitry. The IC supports various logic levels, allowing it to interface with different systems. It operates with a single 3.3V power supply and consumes low power while providing reliable signal transmission.

Detailed Application Field Plans

The DS91C176TMAX can be used in various applications that require high-speed differential signal transmission. Some potential application fields include:

  1. Telecommunications: Used in high-speed data communication systems.
  2. Industrial Automation: Enables reliable signal transmission in industrial control systems.
  3. Automotive Electronics: Suitable for automotive applications requiring high-speed data transfer.
  4. Medical Equipment: Used in medical devices that require high-speed signal transmission.
  5. Test and Measurement: Provides accurate signal transmission in testing and measurement equipment.

Detailed and Complete Alternative Models

  1. SN65LVDS179DGK: Differential Line Driver and Receiver, supports data rates up to 400 Mbps.
  2. MAX9126: High-Speed Differential Line Driver and Receiver, compatible with LVDS logic levels.
  3. DS90LV019: LVDS Line Driver and Receiver, supports data rates up to 400 Mbps.

These alternative models offer similar functionality and can be considered as alternatives to the DS91C176TMAX based on specific requirements and compatibility with existing systems.

Word count: 512 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi DS91C176TMAX dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of DS91C176TMAX in technical solutions:

  1. Q: What is DS91C176TMAX? A: DS91C176TMAX is a high-speed LVDS (Low Voltage Differential Signaling) serializer/deserializer chip used for transmitting and receiving digital data over long distances.

  2. Q: What are the key features of DS91C176TMAX? A: Some key features of DS91C176TMAX include high-speed data transmission up to 135 Mbps, low power consumption, built-in ESD protection, and compatibility with various video standards.

  3. Q: In what applications can DS91C176TMAX be used? A: DS91C176TMAX is commonly used in applications such as automotive infotainment systems, industrial automation, medical imaging, and surveillance systems.

  4. Q: How does DS91C176TMAX achieve long-distance data transmission? A: DS91C176TMAX uses LVDS technology, which provides high noise immunity and allows data transmission over long distances without significant signal degradation.

  5. Q: Can DS91C176TMAX be used for bidirectional communication? A: No, DS91C176TMAX is a unidirectional serializer/deserializer chip, meaning it can either transmit or receive data but not both simultaneously.

  6. Q: What is the operating voltage range of DS91C176TMAX? A: DS91C176TMAX operates at a supply voltage range of 3.0V to 3.6V.

  7. Q: Does DS91C176TMAX support hot-plugging of devices? A: Yes, DS91C176TMAX supports hot-plugging, allowing devices to be connected or disconnected while the system is powered on.

  8. Q: Can DS91C176TMAX be used with different video resolutions? A: Yes, DS91C176TMAX supports various video resolutions, including common standards like VGA, SVGA, XGA, and UXGA.

  9. Q: What is the maximum cable length supported by DS91C176TMAX? A: The maximum cable length depends on factors such as cable quality and data rate, but typically it can support distances up to 10 meters.

  10. Q: Are evaluation boards available for DS91C176TMAX? A: Yes, evaluation boards are available for DS91C176TMAX, which allow developers to test and prototype their designs before integration into the final product.

Please note that these answers are general and may vary depending on specific implementation requirements.