Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
INA201AIDRG4
Lihat Butiran Helaian data

INA201AIDRG4

Product Overview

Category: Integrated Circuit (IC)

Use: The INA201AIDRG4 is a high-precision, low-power, bidirectional current-sensing amplifier. It is designed for use in applications that require accurate measurement of bidirectional current flow.

Characteristics: - High precision: The INA201AIDRG4 offers excellent accuracy with a maximum offset voltage of 50µV and a gain error of only 0.1%. - Low power consumption: With a supply voltage range of 2.7V to 5.5V, this amplifier consumes minimal power, making it suitable for battery-powered applications. - Bidirectional current sensing: The device can accurately measure both positive and negative currents flowing through the load. - Wide common-mode voltage range: The INA201AIDRG4 can operate with a common-mode voltage range from -16V to +80V, allowing flexibility in various applications. - Rail-to-rail output swing: It provides an output voltage swing that extends close to the supply rails, maximizing the dynamic range.

Package: The INA201AIDRG4 comes in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence: This IC serves as a highly precise and low-power solution for bidirectional current sensing applications.

Packaging/Quantity: The INA201AIDRG4 is typically available in reels containing 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Common-Mode Voltage Range: -16V to +80V
  • Offset Voltage: Maximum 50µV
  • Gain Error: Maximum 0.1%
  • Operating Temperature Range: -40°C to +125°C
  • Package Type: 8-pin SOIC

Detailed Pin Configuration

The INA201AIDRG4 has the following pin configuration:

  1. V+ (Positive Supply Voltage)
  2. V- (Negative Supply Voltage)
  3. REF (Reference Voltage)
  4. IN+ (Positive Current Sense Input)
  5. IN- (Negative Current Sense Input)
  6. OUT (Amplifier Output)
  7. SET (Gain Setting Pin)
  8. NC (No Connection)

Functional Features

  • High precision amplification of bidirectional current signals.
  • Wide common-mode voltage range for versatile applications.
  • Low power consumption, suitable for battery-powered devices.
  • Rail-to-rail output swing for maximum dynamic range.
  • Adjustable gain through the SET pin.

Advantages and Disadvantages

Advantages: - High precision and accuracy in current sensing applications. - Low power consumption extends battery life. - Wide common-mode voltage range allows flexibility in various applications. - Rail-to-rail output swing maximizes dynamic range.

Disadvantages: - Limited to 8-pin SOIC package, which may not be suitable for all form factors. - Requires external components for proper operation.

Working Principles

The INA201AIDRG4 utilizes a differential amplifier architecture to accurately measure bidirectional currents. It amplifies the voltage difference between the IN+ and IN- pins, allowing precise current measurements. The gain can be adjusted using an external resistor connected to the SET pin.

Detailed Application Field Plans

The INA201AIDRG4 finds applications in various fields, including but not limited to: - Battery management systems - Power monitoring and control - Motor control and protection - Industrial automation - Energy metering

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the INA201AIDRG4 include: - INA210AIDCKR - INA212AIDCKT - INA213AIDCKT - INA214AIDCKT - INA215AIDCKT

These models provide comparable performance and features, allowing users to choose the most suitable option for their specific application requirements.

Word count: 536 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi INA201AIDRG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of INA201AIDRG4 in technical solutions:

  1. Q: What is the INA201AIDRG4? A: The INA201AIDRG4 is a precision instrumentation amplifier designed for accurate amplification of low-level signals.

  2. Q: What is the input voltage range of the INA201AIDRG4? A: The input voltage range of the INA201AIDRG4 is typically ±200mV, but it can be extended with external resistors.

  3. Q: What is the gain accuracy of the INA201AIDRG4? A: The gain accuracy of the INA201AIDRG4 is typically 0.01% due to its high precision design.

  4. Q: Can the INA201AIDRG4 operate from a single power supply? A: Yes, the INA201AIDRG4 can operate from a single power supply ranging from 2.7V to 36V.

  5. Q: What is the common-mode rejection ratio (CMRR) of the INA201AIDRG4? A: The CMRR of the INA201AIDRG4 is typically 100dB, which ensures excellent rejection of common-mode noise.

  6. Q: Is the INA201AIDRG4 suitable for low-power applications? A: Yes, the INA201AIDRG4 has a low quiescent current of 350µA, making it suitable for low-power applications.

  7. Q: Can the INA201AIDRG4 handle high-frequency signals? A: Yes, the INA201AIDRG4 has a bandwidth of 500kHz, allowing it to handle high-frequency signals effectively.

  8. Q: Does the INA201AIDRG4 have built-in protection features? A: Yes, the INA201AIDRG4 has built-in overvoltage and reverse polarity protection to safeguard against potential damage.

  9. Q: Can the INA201AIDRG4 be used in temperature-sensitive applications? A: Yes, the INA201AIDRG4 has a wide operating temperature range of -40°C to +125°C, making it suitable for temperature-sensitive applications.

  10. Q: What are some typical applications of the INA201AIDRG4? A: The INA201AIDRG4 is commonly used in precision measurement systems, medical equipment, industrial automation, and automotive applications where accurate signal amplification is required.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.