Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LM2753SDX
Lihat Butiran Helaian data

LM2753SDX

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC for LED Backlighting

Characteristics: - High efficiency - Low quiescent current - Wide input voltage range - Adjustable output voltage - Overvoltage and overcurrent protection - Thermal shutdown protection

Package: SDP (Small Outline Package)

Essence: The LM2753SDX is a power management IC specifically designed for LED backlighting applications. It provides efficient power conversion and control for driving LEDs in various electronic devices.

Packaging/Quantity: The LM2753SDX is available in a small outline package, and it is typically sold in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 4V to 24V
  • Maximum Output Current: 1A
  • Quiescent Current: 60µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The LM2753SDX has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage
  6. SW: Switch pin

Functional Features

  • High Efficiency: The LM2753SDX utilizes advanced power conversion techniques to achieve high efficiency, minimizing power loss and maximizing battery life.
  • Low Quiescent Current: With a low quiescent current, the LM2753SDX minimizes power consumption when the device is in standby or idle mode.
  • Wide Input Voltage Range: The IC can operate with input voltages ranging from 2.7V to 5.5V, making it suitable for a wide range of applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within a range of 4V to 24V, allowing flexibility in LED backlighting designs.
  • Protection Features: The LM2753SDX incorporates overvoltage and overcurrent protection mechanisms, ensuring the safety and reliability of the LED backlighting system. It also includes thermal shutdown protection to prevent damage due to excessive heat.

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Wide input voltage range allows compatibility with various power sources - Adjustable output voltage provides design flexibility - Protection features enhance system reliability

Disadvantages: - Limited maximum output current (1A) - Requires external components for complete LED backlighting system implementation

Working Principles

The LM2753SDX operates as a step-up (boost) converter, converting the input voltage to a higher output voltage suitable for driving LEDs. It uses a switching regulator topology to efficiently control the power flow. The feedback mechanism ensures that the output voltage remains stable and within the desired range.

Detailed Application Field Plans

The LM2753SDX is commonly used in the following applications:

  1. Mobile devices (smartphones, tablets, portable media players) for LED backlighting
  2. LCD monitors and TVs for LED backlighting
  3. Automotive displays and infotainment systems
  4. Industrial control panels and instrumentation
  5. General lighting applications requiring efficient LED driving

Detailed and Complete Alternative Models

  1. LM2754SDX: Similar to LM2753SDX but with higher maximum output current (1.5A)
  2. LM2755SDX: Similar to LM2753SDX but with adjustable frequency for PWM dimming control
  3. LM2756SDX: Similar to LM2753SDX but with integrated I2C interface for digital control

These alternative models offer similar functionality with slight variations to cater to specific application requirements.

Word count: 411 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LM2753SDX dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of LM2753SDX in technical solutions:

  1. Q: What is LM2753SDX? A: LM2753SDX is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of LM2753SDX? A: Some key features of LM2753SDX include multiple voltage regulators, current limit protection, thermal shutdown, and adjustable output voltages.

  3. Q: What technical solutions can LM2753SDX be used in? A: LM2753SDX can be used in a wide range of applications such as smartphones, tablets, portable media players, and other battery-powered devices.

  4. Q: How does LM2753SDX help in power management? A: LM2753SDX provides efficient power conversion and regulation, allowing for optimal utilization of the available power source and extending battery life.

  5. Q: Can LM2753SDX support multiple voltage outputs? A: Yes, LM2753SDX has multiple voltage regulators that can provide different output voltages simultaneously.

  6. Q: Does LM2753SDX have any built-in protection mechanisms? A: Yes, LM2753SDX includes features like current limit protection and thermal shutdown to safeguard against overcurrent or overheating conditions.

  7. Q: Is LM2753SDX compatible with different battery chemistries? A: Yes, LM2753SDX is designed to work with various battery chemistries, including lithium-ion (Li-ion) and lithium-polymer (LiPo).

  8. Q: Can LM2753SDX be controlled and monitored remotely? A: Yes, LM2753SDX can be controlled and monitored through an I2C interface, allowing for remote configuration and status monitoring.

  9. Q: What is the input voltage range supported by LM2753SDX? A: LM2753SDX supports an input voltage range of typically 2.7V to 5.5V, making it compatible with a wide range of power sources.

  10. Q: Are there any application notes or reference designs available for LM2753SDX? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing LM2753SDX in various technical solutions.

Please note that these questions and answers are general in nature and may vary depending on specific requirements and use cases.