Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PCA9534DB
Lihat Butiran Helaian data

PCA9534DB

Product Overview

The PCA9534DB belongs to the category of I2C-bus controlled 8-bit I/O expander for open-drain outputs. It is commonly used to provide general-purpose remote I/O expansion for most microcontroller families via the I2C interface. The device features an open-drain output with a high-voltage tolerance, making it suitable for interfacing with a wide range of components. The PCA9534DB comes in a small package and offers flexibility and ease of use, making it an essential component in various electronic applications.

Basic Information

  • Category: I2C-bus controlled 8-bit I/O expander
  • Use: Remote I/O expansion for microcontroller families
  • Characteristics: Open-drain outputs, high-voltage tolerance
  • Package: Small form factor
  • Essence: Flexibility and ease of use
  • Packaging/Quantity: Varies based on supplier

Specifications

  • Operating Voltage: 2.3V to 5.5V
  • I2C-bus Interface: Compatible with SMBus standards
  • Output Current: 25mA per channel
  • Number of I/Os: 8
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. A0: Address input
  2. A1: Address input
  3. A2: Address input
  4. P0-P7: I/O ports
  5. SDA: I2C-bus data line
  6. SCL: I2C-bus clock line
  7. GND: Ground
  8. VCC: Power supply

Functional Features

  • I2C-bus controlled 8-bit I/O expander
  • Open-drain outputs with high-voltage tolerance
  • Internal power-on reset
  • Noise filter on SCL/SDA inputs
  • Polarity inversion register to configure the polarity of the input port data

Advantages and Disadvantages

Advantages

  • Simplifies I/O expansion for microcontrollers
  • High-voltage tolerance allows interfacing with various components
  • Small form factor for space-constrained applications
  • Flexible address configuration for multiple devices on the same bus

Disadvantages

  • Limited to 8 I/O ports
  • Requires I2C-bus communication for control

Working Principles

The PCA9534DB operates by receiving commands and data through the I2C-bus interface from a microcontroller. It then processes these commands to control the state of its I/O ports, allowing for remote I/O expansion. The open-drain outputs with high-voltage tolerance enable the device to interface with different components while providing flexibility in controlling various external devices.

Detailed Application Field Plans

The PCA9534DB finds extensive application in scenarios requiring remote I/O expansion, such as: - Home automation systems - Industrial control systems - Automotive electronics - IoT devices - Robotics

Detailed and Complete Alternative Models

  1. MCP23008: Similar I2C-bus controlled 8-bit I/O expander with 8 I/O ports
  2. PCF8574: I2C-bus I/O expander with 8-bit remote I/O ports

In conclusion, the PCA9534DB serves as a versatile and essential component for remote I/O expansion in various electronic applications, offering flexibility, ease of use, and compatibility with microcontroller families.

Word Count: 511

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PCA9534DB dalam penyelesaian teknikal

  1. What is PCA9534DB?

    • PCA9534DB is an 8-bit I2C-bus and SMBus I/O expander with interrupt output and configuration registers.

  2. What are the key features of PCA9534DB?

    • The key features include 8-bit remote I/O port for I2C-bus/SMBus, open-drain active-low interrupt output, and programmable I2C-bus address.

  3. How can PCA9534DB be used in technical solutions?

    • PCA9534DB can be used to provide additional I/O ports for microcontrollers, interface with various sensors and devices, and control LEDs and other digital components.

  4. What is the maximum frequency supported by PCA9534DB?

    • PCA9534DB supports a maximum I2C-bus frequency of 400 kHz.

  5. Can PCA9534DB be cascaded to expand the number of I/O ports?

    • Yes, multiple PCA9534DB devices can be cascaded to expand the number of I/O ports available.

  6. Does PCA9534DB support hardware addressing?

    • No, PCA9534DB does not support hardware addressing. It uses software programmable I2C-bus addresses.

  7. What is the voltage range supported by PCA9534DB?

    • PCA9534DB supports a wide voltage range from 2.3V to 5.5V, making it suitable for various applications.

  8. Can PCA9534DB be used for PWM control?

    • Yes, PCA9534DB supports PWM control for LED dimming and other applications.

  9. What are the typical applications of PCA9534DB?

    • Typical applications include industrial control systems, consumer electronics, LED lighting control, and general purpose I/O expansion.

  10. Is there a development kit or evaluation board available for PCA9534DB?

    • Yes, NXP offers a PCA9534DB evaluation kit that provides a convenient platform for testing and prototyping with the device.