Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN65ELT20DGKR
Lihat Butiran Helaian data

SN65ELT20DGKR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal transmission and reception
  • Characteristics: High-speed, low-power, differential line driver/receiver
  • Package: VSSOP (Very Small Outline Package)
  • Essence: Transmits and receives high-speed signals over long distances
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3 V to 3.6 V
  • Operating Temperature Range: -40°C to 85°C
  • Data Rate: Up to 2.5 Gbps
  • Input Common Mode Voltage Range: -2 V to 2 V
  • Output Voltage Swing: 400 mV (differential)
  • Power Consumption: 100 mW (typical)

Pin Configuration

The SN65ELT20DGKR has a total of 8 pins arranged as follows:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. IN-: Negative input for differential signal
  4. IN+: Positive input for differential signal
  5. OUT-: Negative output for differential signal
  6. OUT+: Positive output for differential signal
  7. EN: Enable pin for controlling the device operation
  8. NC: No connection (unused pin)

Functional Features

  • High-speed signal transmission and reception up to 2.5 Gbps
  • Low power consumption for energy-efficient operation
  • Differential signaling for noise immunity and robustness
  • Wide input common mode voltage range for compatibility with various signal sources
  • Small package size for space-constrained applications

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Noise immunity due to differential signaling - Compact package size

Disadvantages: - Limited operating temperature range (-40°C to 85°C) - Requires external enable signal for device operation

Working Principles

The SN65ELT20DGKR is a differential line driver/receiver IC designed for high-speed signal transmission and reception. It operates by converting single-ended input signals into differential signals, which are then transmitted over long distances with minimal signal degradation. The device uses low-power circuitry to minimize energy consumption while maintaining high data rates. It also incorporates noise immunity features to ensure reliable signal transmission in noisy environments.

Detailed Application Field Plans

The SN65ELT20DGKR finds applications in various fields where high-speed signal transmission and reception are required. Some of the potential application areas include:

  1. Telecommunications: Used in high-speed data communication systems, such as fiber optic networks and high-speed internet connections.
  2. Industrial Automation: Enables high-speed data transfer between control systems and sensors/actuators in industrial automation processes.
  3. Medical Equipment: Facilitates high-speed data exchange in medical imaging systems, patient monitoring devices, and diagnostic equipment.
  4. Automotive Electronics: Supports high-speed data communication in automotive infotainment systems, advanced driver assistance systems (ADAS), and vehicle networking.
  5. Consumer Electronics: Used in high-speed interfaces like HDMI, DisplayPort, and Thunderbolt for video/audio transmission between devices.

Detailed and Complete Alternative Models

  1. SN65ELT22DGKR: Similar to SN65ELT20DGKR but with higher data rate capability (up to 5 Gbps).
  2. SN65ELT23DGKR: Differential line driver/receiver with extended operating temperature range (-55°C to 125°C).
  3. SN65ELT24DGKR: Low-power differential line driver/receiver with reduced power consumption (50 mW typical).

(Note: These alternative models are provided for reference purposes and may have different specifications and pin configurations. Please refer to the respective datasheets for detailed information.)

Word Count: 515

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN65ELT20DGKR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN65ELT20DGKR in technical solutions:

  1. Q: What is SN65ELT20DGKR? A: SN65ELT20DGKR is a high-speed differential line driver/receiver IC used for transmitting and receiving signals over long distances.

  2. Q: What is the operating voltage range of SN65ELT20DGKR? A: The operating voltage range of SN65ELT20DGKR is typically between 3.3V and 5V.

  3. Q: What is the maximum data rate supported by SN65ELT20DGKR? A: SN65ELT20DGKR supports data rates up to 2.5 Gbps, making it suitable for high-speed communication applications.

  4. Q: Can SN65ELT20DGKR be used for both single-ended and differential signaling? A: Yes, SN65ELT20DGKR can be used for both single-ended and differential signaling, providing flexibility in various applications.

  5. Q: Does SN65ELT20DGKR have built-in protection features? A: Yes, SN65ELT20DGKR has built-in ESD protection and thermal shutdown features to ensure reliable operation and protect against damage.

  6. Q: What is the typical power consumption of SN65ELT20DGKR? A: The typical power consumption of SN65ELT20DGKR is around 100mW, making it suitable for low-power applications.

  7. Q: Can SN65ELT20DGKR be used in industrial environments? A: Yes, SN65ELT20DGKR is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for harsh environments.

  8. Q: What is the output voltage swing of SN65ELT20DGKR? A: The output voltage swing of SN65ELT20DGKR is typically ±1V, ensuring compatibility with various input levels.

  9. Q: Can SN65ELT20DGKR be used in point-to-point communication systems? A: Yes, SN65ELT20DGKR is commonly used in point-to-point communication systems such as Ethernet, USB, and HDMI.

  10. Q: Is SN65ELT20DGKR available in different package options? A: Yes, SN65ELT20DGKR is available in various package options, including small-outline packages (SOT-23, VSSOP) for space-constrained applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.