Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74ABT833NSRE4
Lihat Butiran Helaian data

SN74ABT833NSRE4

Product Overview

  • Category: Integrated Circuit
  • Use: Logic Level Translator
  • Characteristics: High-speed, low-power consumption
  • Package: Surface Mount
  • Essence: Translates logic levels between different voltage domains
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.2V to 3.6V
  • Logic Voltage Levels: 1.8V to 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Type: Non-Inverting
  • Number of Channels: 8
  • Propagation Delay: 2.5ns (typical)
  • Output Drive Capability: ±24mA

Detailed Pin Configuration

The SN74ABT833NSRE4 has a total of 20 pins. The pin configuration is as follows:

  1. VCCA - Power supply for A side (1.2V to 3.6V)
  2. A1 - Channel A input 1
  3. A2 - Channel A input 2
  4. A3 - Channel A input 3
  5. A4 - Channel A input 4
  6. GND - Ground
  7. B4 - Channel B input 4
  8. B3 - Channel B input 3
  9. B2 - Channel B input 2
  10. B1 - Channel B input 1
  11. VCCB - Power supply for B side (1.2V to 3.6V)
  12. OE - Output Enable
  13. Y1 - Channel Y output 1
  14. Y2 - Channel Y output 2
  15. Y3 - Channel Y output 3
  16. Y4 - Channel Y output 4
  17. GND - Ground
  18. B5 - Channel B input 5
  19. B6 - Channel B input 6
  20. B7 - Channel B input 7

Functional Features

The SN74ABT833NSRE4 is designed to translate logic levels between different voltage domains. It provides bidirectional level shifting, allowing seamless communication between devices operating at different voltage levels. The device features non-inverting inputs and outputs, ensuring signal integrity during translation.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - Wide supply voltage range - Bidirectional level shifting capability - Non-inverting inputs and outputs

Disadvantages: - Limited number of channels (8) - Propagation delay may affect timing-sensitive applications

Working Principles

The SN74ABT833NSRE4 utilizes a combination of voltage level shifters and control circuitry to perform logic level translation. When the OE (Output Enable) pin is high, the device is enabled, and the inputs on the A side are translated to the corresponding voltage levels on the B side. Conversely, when the OE pin is low, the device is disabled, and the outputs on the Y side are in high-impedance state.

Detailed Application Field Plans

The SN74ABT833NSRE4 is commonly used in various applications where logic level translation is required. Some potential application fields include:

  1. Microcontroller interfacing with different voltage peripherals
  2. Communication interfaces between systems operating at different voltage levels
  3. Sensor networks requiring voltage level compatibility
  4. Industrial automation systems with mixed voltage components
  5. Battery-powered devices with multiple voltage domains

Detailed and Complete Alternative Models

  1. SN74LVC1T45DBVR - Single-Bit Dual-Supply Bus Transceiver
  2. SN74AVC4T245PWR - 4-Bit Dual-Supply Bus Transceiver
  3. SN74LVC8T245PW - 8-Bit Dual-Supply Bus Transceiver
  4. SN74AVC16T245DGGR - 16-Bit Dual-Supply Bus Transceiver
  5. SN74LVC32APW - Quad 2-Input OR Gate

These alternative models offer similar functionality and can be considered as alternatives to the SN74ABT833NSRE4 based on specific application requirements.

Word count: 489 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74ABT833NSRE4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74ABT833NSRE4 in technical solutions:

  1. Q: What is SN74ABT833NSRE4? A: SN74ABT833NSRE4 is a specific integrated circuit (IC) chip that belongs to the ABT family of high-speed, low-power devices.

  2. Q: What is the purpose of SN74ABT833NSRE4? A: SN74ABT833NSRE4 is designed to function as a 9-bit transparent latch with 3-state outputs, commonly used for data storage and signal buffering applications.

  3. Q: What is the operating voltage range of SN74ABT833NSRE4? A: The operating voltage range for SN74ABT833NSRE4 is typically between 4.5V and 5.5V.

  4. Q: What is the maximum data transfer rate supported by SN74ABT833NSRE4? A: SN74ABT833NSRE4 supports high-speed data transfer rates up to 200 MHz.

  5. Q: Can SN74ABT833NSRE4 be used in both parallel and serial data applications? A: Yes, SN74ABT833NSRE4 can be used in both parallel and serial data applications, depending on the specific requirements of the system.

  6. Q: Does SN74ABT833NSRE4 have built-in protection features? A: Yes, SN74ABT833NSRE4 includes built-in ESD (electrostatic discharge) protection to safeguard against potential damage during handling or operation.

  7. Q: What is the output drive capability of SN74ABT833NSRE4? A: SN74ABT833NSRE4 has a high output drive capability, allowing it to drive heavily loaded buses or long traces.

  8. Q: Can SN74ABT833NSRE4 be used in automotive applications? A: Yes, SN74ABT833NSRE4 is qualified for automotive applications and meets the necessary industry standards.

  9. Q: Does SN74ABT833NSRE4 support hot insertion and removal of devices? A: Yes, SN74ABT833NSRE4 supports hot insertion and removal, making it suitable for applications where devices may need to be added or removed while the system is powered on.

  10. Q: Are there any specific layout considerations when using SN74ABT833NSRE4? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper signal integrity and minimize noise interference.

Please note that these answers are general and should be verified with the official documentation and datasheet of SN74ABT833NSRE4 for accurate information.