Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74ALVC16834ZQLR
Lihat Butiran Helaian data

SN74ALVC16834ZQLR

Product Overview

Category

SN74ALVC16834ZQLR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital logic applications for data transmission and signal processing.

Characteristics

  • Low voltage operation: The SN74ALVC16834ZQLR operates at a low voltage range, making it suitable for portable devices and low-power applications.
  • High-speed performance: This IC offers high-speed data transmission, enabling efficient processing of digital signals.
  • Wide operating temperature range: It can operate reliably across a wide temperature range, making it suitable for various environments.
  • Low power consumption: The SN74ALVC16834ZQLR is designed to consume minimal power, enhancing energy efficiency.

Package

The SN74ALVC16834ZQLR is available in a small-outline integrated circuit (SOIC) package. This package provides ease of handling and compatibility with standard PCB manufacturing processes.

Essence

The essence of SN74ALVC16834ZQLR lies in its ability to facilitate reliable and efficient digital signal processing through its integrated circuit design.

Packaging/Quantity

The SN74ALVC16834ZQLR is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Logic family: ALVC
  • Number of channels: 16
  • Input/output type: Non-inverting
  • Supply voltage range: 1.65V to 3.6V
  • Operating temperature range: -40°C to +85°C
  • Propagation delay: <5 ns
  • Output drive strength: ±24 mA

Detailed Pin Configuration

The SN74ALVC16834ZQLR has a total of 48 pins, arranged as follows:

  1. Pin 1: Output Y1
  2. Pin 2: Input A1
  3. Pin 3: Input B1
  4. Pin 4: GND (Ground)
  5. Pin 5: Output Y2
  6. Pin 6: Input A2
  7. Pin 7: Input B2
  8. Pin 8: VCC (Supply voltage)
  9. Pin 9: Output Y3
  10. Pin 10: Input A3
  11. Pin 11: Input B3
  12. Pin 12: GND (Ground)
  13. Pin 13: Output Y4
  14. Pin 14: Input A4
  15. Pin 15: Input B4
  16. Pin 16: VCC (Supply voltage)
  17. Pin 17: Output Y5
  18. Pin 18: Input A5
  19. Pin 19: Input B5
  20. Pin 20: GND (Ground)
  21. Pin 21: Output Y6
  22. Pin 22: Input A6
  23. Pin 23: Input B6
  24. Pin 24: VCC (Supply voltage)
  25. Pin 25: Output Y7
  26. Pin 26: Input A7
  27. Pin 27: Input B7
  28. Pin 28: GND (Ground)
  29. Pin 29: Output Y8
  30. Pin 30: Input A8
  31. Pin 31: Input B8
  32. Pin 32: VCC (Supply voltage)
  33. Pin 33: Output Y9
  34. Pin 34: Input A9
  35. Pin 35: Input B9
  36. Pin 36: GND (Ground)
  37. Pin 37: Output Y10
  38. Pin 38: Input A10
  39. Pin 39: Input B10
  40. Pin 40: VCC (Supply voltage)
  41. Pin 41: Output Y11
  42. Pin 42: Input A11
  43. Pin 43: Input B11
  44. Pin 44: GND (Ground)
  45. Pin 45: Output Y12
  46. Pin 46: Input A12
  47. Pin 47: Input B12
  48. Pin 48: VCC (Supply voltage)

Functional Features

The SN74ALVC16834ZQLR offers the following functional features:

  • Non-inverting buffer: It provides non-inverted output signals, maintaining the same logic level as the input signals.
  • High-speed operation: The IC enables fast data transmission and processing, ensuring efficient digital signal handling.
  • Wide supply voltage range: It can operate within a wide voltage range, allowing compatibility with various power supply systems.
  • ESD protection: The IC incorporates electrostatic discharge (ESD) protection, safeguarding it against potential damage during handling or operation.

Adv

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74ALVC16834ZQLR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74ALVC16834ZQLR:

  1. Q: What is SN74ALVC16834ZQLR? A: SN74ALVC16834ZQLR is a 16-bit universal bus driver with 3-state outputs, designed for low-voltage (1.65V to 3.6V) applications.

  2. Q: What is the maximum operating frequency of SN74ALVC16834ZQLR? A: The maximum operating frequency of SN74ALVC16834ZQLR is typically around 500 MHz.

  3. Q: Can SN74ALVC16834ZQLR be used in both input and output applications? A: Yes, SN74ALVC16834ZQLR can be used as both an input buffer and an output driver.

  4. Q: What is the purpose of the 3-state outputs in SN74ALVC16834ZQLR? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.

  5. Q: What is the power supply voltage range for SN74ALVC16834ZQLR? A: SN74ALVC16834ZQLR operates within a power supply voltage range of 1.65V to 3.6V.

  6. Q: Can SN74ALVC16834ZQLR tolerate overvoltage on its inputs? A: No, SN74ALVC16834ZQLR is not designed to tolerate overvoltage on its inputs. It is recommended to stay within the specified voltage range.

  7. Q: Does SN74ALVC16834ZQLR have built-in ESD protection? A: Yes, SN74ALVC16834ZQLR has built-in ESD protection, which helps protect the device from electrostatic discharge.

  8. Q: What is the output drive strength of SN74ALVC16834ZQLR? A: The output drive strength of SN74ALVC16834ZQLR is typically around 12 mA.

  9. Q: Can SN74ALVC16834ZQLR be used in automotive applications? A: Yes, SN74ALVC16834ZQLR is qualified for automotive applications and meets the necessary standards.

  10. Q: Are there any specific layout considerations for using SN74ALVC16834ZQLR? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper performance and minimize noise coupling.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and detailed information.