Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74AVC20T245DGGR
Lihat Butiran Helaian data

SN74AVC20T245DGGR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Translator
  • Characteristics: Bi-directional voltage level shifting and translation, high-speed operation, low power consumption
  • Package: TSSOP-48
  • Essence: This IC is designed to shift and translate voltage levels between different logic families, enabling seamless communication between devices operating at different voltage levels.
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 2
  • Voltage Levels Supported: 1.2V to 3.6V
  • Logic Families Supported: LVTTL, CMOS
  • Operating Voltage Range: 1.65V to 3.6V
  • Maximum Data Rate: 400 Mbps
  • Input Capacitance: 4 pF
  • Output Capacitance: 8 pF
  • Supply Current: 10 µA (typical)

Detailed Pin Configuration

The SN74AVC20T245DGGR has a total of 48 pins, arranged as follows:

  • Pin 1: Channel 1 A-side data input/output
  • Pin 2: Channel 1 B-side data input/output
  • Pin 3: Channel 1 enable input
  • Pin 4: Ground
  • Pin 5: Channel 2 A-side data input/output
  • Pin 6: Channel 2 B-side data input/output
  • Pin 7: Channel 2 enable input
  • Pin 8: VCC (Power supply)
  • Pins 9-16: Reserved for future use
  • Pins 17-32: Ground
  • Pins 33-40: Reserved for future use
  • Pins 41-48: VCC (Power supply)

Functional Features

  • Bi-directional voltage level shifting and translation
  • Automatic direction control based on input signal levels
  • Supports bidirectional data flow between different logic families
  • High-speed operation with minimal propagation delay
  • Low power consumption for energy-efficient applications
  • ESD protection for robustness against electrostatic discharge

Advantages and Disadvantages

Advantages: - Enables seamless communication between devices operating at different voltage levels - Supports high-speed data transmission - Low power consumption makes it suitable for battery-powered devices - Provides ESD protection for enhanced reliability

Disadvantages: - Limited to specific voltage ranges (1.2V to 3.6V) - Requires careful consideration of input and output capacitance for optimal performance

Working Principles

The SN74AVC20T245DGGR operates by monitoring the voltage levels of the input signals and automatically adjusting the direction of data flow accordingly. It uses a combination of level shifters and translators to convert the voltage levels between different logic families, ensuring compatibility and reliable communication.

Detailed Application Field Plans

The SN74AVC20T245DGGR is commonly used in various applications where voltage level shifting and translation are required. Some of the typical application fields include:

  1. Microcontroller interfacing: The IC enables communication between microcontrollers operating at different voltage levels, allowing seamless integration of multiple devices in a system.
  2. Sensor networks: It facilitates data exchange between sensors and microcontrollers, even when they operate at different voltage levels.
  3. Communication interfaces: The IC can be used in UART, SPI, I2C, or other communication interfaces to enable communication between devices with different voltage requirements.
  4. Industrial automation: It finds applications in industrial control systems, where different components may operate at different voltage levels.

Detailed and Complete Alternative Models

  1. TXB0108PWR: This 8-bit level shifter and translator offers similar functionality and supports a wide voltage range of 1.2V to 5.5V.
  2. SN74LVC8T245PW: This 8-bit bidirectional level shifter and translator supports a voltage range of 1.65V to 5.5V and offers high-speed operation.

These alternative models can be considered based on specific application requirements and voltage level compatibility.

Word count: 446 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74AVC20T245DGGR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74AVC20T245DGGR in technical solutions:

  1. Q: What is the SN74AVC20T245DGGR? A: The SN74AVC20T245DGGR is a bidirectional voltage level translator and voltage-level shifter integrated circuit (IC) manufactured by Texas Instruments.

  2. Q: What is the purpose of the SN74AVC20T245DGGR? A: The purpose of this IC is to translate signals between different voltage levels, allowing communication between devices operating at different voltage levels.

  3. Q: What voltage levels can the SN74AVC20T245DGGR handle? A: The SN74AVC20T245DGGR can handle voltage levels ranging from 1.2V to 3.6V on the A-side and 1.65V to 5.5V on the B-side.

  4. Q: How many channels does the SN74AVC20T245DGGR have? A: The SN74AVC20T245DGGR has 20 channels, allowing for bidirectional translation of up to 20 signals simultaneously.

  5. Q: Can the SN74AVC20T245DGGR be used with I2C or SPI interfaces? A: Yes, the SN74AVC20T245DGGR can be used with I2C or SPI interfaces as it supports bidirectional data transfer.

  6. Q: Does the SN74AVC20T245DGGR require external pull-up or pull-down resistors? A: No, the SN74AVC20T245DGGR has built-in pull-up and pull-down resistors, eliminating the need for external resistors in most cases.

  7. Q: What is the maximum data rate supported by the SN74AVC20T245DGGR? A: The SN74AVC20T245DGGR supports a maximum data rate of 100 Mbps, making it suitable for high-speed communication.

  8. Q: Can the SN74AVC20T245DGGR be used in both 3.3V and 5V systems? A: Yes, the SN74AVC20T245DGGR can be used in both 3.3V and 5V systems, thanks to its wide voltage range compatibility.

  9. Q: Does the SN74AVC20T245DGGR have any built-in ESD protection? A: Yes, the SN74AVC20T245DGGR has built-in ESD protection, ensuring robustness against electrostatic discharge events.

  10. Q: Are there any application notes or reference designs available for the SN74AVC20T245DGGR? A: Yes, Texas Instruments provides application notes and reference designs that can help users understand and implement the SN74AVC20T245DGGR in their technical solutions.

Please note that these answers are general and may vary depending on specific use cases and requirements. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for detailed information.