Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74AVC4T245PW
Lihat Butiran Helaian data

SN74AVC4T245PW

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifting and Voltage Translation
  • Characteristics: High-speed, low-power, bidirectional voltage translator
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Translates signals between different voltage levels in electronic circuits
  • Packaging/Quantity: Available in reels of 2500 pieces

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Number of Channels: 4
  • Input Voltage Levels: 1.8V, 2.5V, 3.3V
  • Output Voltage Levels: 1.8V, 2.5V, 3.3V
  • Maximum Data Rate: 400 Mbps
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74AVC4T245PW has a total of 20 pins, which are divided into two rows of 10 pins each. The pin configuration is as follows:

Pin 1: A1 Pin 2: OE# Pin 3: A2 Pin 4: VCCA Pin 5: B1 Pin 6: B2 Pin 7: GND Pin 8: VCCB Pin 9: Y1 Pin 10: Y2 Pin 11: A3 Pin 12: A4 Pin 13: VREF Pin 14: B3 Pin 15: B4 Pin 16: GND Pin 17: Y3 Pin 18: Y4 Pin 19: VCC Pin 20: GND

Functional Features

  • Bidirectional voltage translation between different voltage levels
  • Automatic direction control based on the input signal
  • Supports level shifting for I2C, SPI, and other digital interfaces
  • Low power consumption
  • High-speed data transmission

Advantages and Disadvantages

Advantages: - Allows seamless integration of components operating at different voltage levels - Provides bidirectional communication between devices with different voltage requirements - Supports high-speed data transfer - Low power consumption

Disadvantages: - Limited to a maximum data rate of 400 Mbps - Requires careful consideration of voltage compatibility to avoid damage to connected devices

Working Principles

The SN74AVC4T245PW is designed to translate signals between different voltage levels in electronic circuits. It uses a combination of level shifters and voltage translators to ensure proper signal integrity and compatibility. The device automatically detects the direction of the signal and adjusts the voltage levels accordingly.

Detailed Application Field Plans

The SN74AVC4T245PW finds applications in various fields where voltage translation is required. Some of the common application areas include:

  1. Mobile Devices: Used to interface components operating at different voltage levels, such as display modules, sensors, and memory chips.
  2. Industrial Automation: Enables communication between devices operating at different voltage levels in control systems and PLCs (Programmable Logic Controllers).
  3. Automotive Electronics: Facilitates voltage translation between different subsystems, such as infotainment systems, engine control units, and sensor networks.
  4. IoT (Internet of Things): Allows connectivity between devices with varying voltage requirements in smart home automation, wearable devices, and sensor networks.

Detailed and Complete Alternative Models

  1. TXB0104: Similar 4-channel bidirectional voltage translator with a wide supply voltage range and high-speed operation.
  2. PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator with automatic direction sensing.
  3. SN74LVC4245A: Octal dual-supply translating transceiver with configurable voltage translation and 3-state outputs.

These alternative models offer similar functionality and can be considered as alternatives to the SN74AVC4T245PW based on specific application requirements.

Word count: 533 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74AVC4T245PW dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74AVC4T245PW in technical solutions:

  1. Q: What is SN74AVC4T245PW? A: SN74AVC4T245PW is a 4-bit dual-supply voltage level translator with configurable voltage-level shifting capabilities.

  2. Q: What is the purpose of SN74AVC4T245PW? A: SN74AVC4T245PW is used to translate logic levels between different voltage domains, enabling communication between devices operating at different voltage levels.

  3. Q: What voltage levels can SN74AVC4T245PW support? A: SN74AVC4T245PW supports voltage translation between 1.2V and 3.6V.

  4. Q: How many channels does SN74AVC4T245PW have? A: SN74AVC4T245PW has four bidirectional channels, allowing for simultaneous translation of up to four signals.

  5. Q: Can SN74AVC4T245PW be used in both uni-directional and bi-directional applications? A: Yes, SN74AVC4T245PW can be used in both uni-directional and bi-directional applications.

  6. Q: What is the maximum data rate supported by SN74AVC4T245PW? A: SN74AVC4T245PW supports data rates up to 100 Mbps.

  7. Q: Does SN74AVC4T245PW require external pull-up or pull-down resistors? A: No, SN74AVC4T245PW has built-in pull-up and pull-down resistors, eliminating the need for external components.

  8. Q: Can SN74AVC4T245PW handle level shifting between different voltage domains in mixed-signal applications? A: Yes, SN74AVC4T245PW can be used for level shifting in both digital and analog mixed-signal applications.

  9. Q: What is the power supply voltage range for SN74AVC4T245PW? A: SN74AVC4T245PW operates with a power supply voltage range of 1.2V to 3.6V.

  10. Q: Is SN74AVC4T245PW available in different package options? A: Yes, SN74AVC4T245PW is available in various package options, including TSSOP and VQFN.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.