Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74CB3T16212DGGR
Lihat Butiran Helaian data

SN74CB3T16212DGGR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switching and Level Shifting
  • Characteristics: High-speed, low-power, bidirectional voltage level translator
  • Package: 56-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Translates signals between different voltage levels in electronic circuits
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCCA or VCCB
  • Maximum Data Rate: 400 Mbps
  • Low ON-State Resistance: 5 ohms (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74CB3T16212DGGR has a total of 56 pins. The pin configuration is as follows:

  1. OE (Output Enable) A
  2. I/O0A (Bidirectional Data I/O) A
  3. I/O1A (Bidirectional Data I/O) A
  4. GND (Ground)
  5. VCCA (Voltage Supply for Port A)
  6. VCCB (Voltage Supply for Port B)
  7. I/O2A (Bidirectional Data I/O) A
  8. I/O3A (Bidirectional Data I/O) A
  9. I/O4A (Bidirectional Data I/O) A
  10. I/O5A (Bidirectional Data I/O) A
  11. I/O6A (Bidirectional Data I/O) A
  12. I/O7A (Bidirectional Data I/O) A
  13. I/O8A (Bidirectional Data I/O) A
  14. I/O9A (Bidirectional Data I/O) A
  15. I/O10A (Bidirectional Data I/O) A
  16. I/O11A (Bidirectional Data I/O) A
  17. VCC (Voltage Supply)
  18. GND (Ground)
  19. I/O12A (Bidirectional Data I/O) A
  20. I/O13A (Bidirectional Data I/O) A
  21. I/O14A (Bidirectional Data I/O) A
  22. I/O15A (Bidirectional Data I/O) A
  23. I/O16A (Bidirectional Data I/O) A
  24. I/O17A (Bidirectional Data I/O) A
  25. I/O18A (Bidirectional Data I/O) A
  26. I/O19A (Bidirectional Data I/O) A
  27. I/O20A (Bidirectional Data I/O) A
  28. I/O21A (Bidirectional Data I/O) A
  29. I/O22A (Bidirectional Data I/O) A
  30. I/O23A (Bidirectional Data I/O) A
  31. GND (Ground)
  32. OE (Output Enable) B
  33. I/O0B (Bidirectional Data I/O) B
  34. I/O1B (Bidirectional Data I/O) B
  35. GND (Ground)
  36. VCCA (Voltage Supply for Port A)
  37. VCCB (Voltage Supply for Port B)
  38. I/O2B (Bidirectional Data I/O) B
  39. I/O3B (Bidirectional Data I/O) B
  40. I/O4B (Bidirectional Data I/O) B
  41. I/O5B (Bidirectional Data I/O) B
  42. I/O6B (Bidirectional Data I/O) B
  43. I/O7B (Bidirectional Data I/O) B
  44. I/O8B (Bidirectional Data I/O) B
  45. I/O9B (Bidirectional Data I/O) B
  46. I/O10B (Bidirectional Data I/O) B
  47. I/O11B (Bidirectional Data I/O) B
  48. VCC (Voltage Supply)
  49. GND (Ground)
  50. I/O12B (Bidirectional Data I/O) B
  51. I/O13B (Bidirectional Data I/O) B
  52. I/O14B (Bidirectional Data I/O) B
  53. I/O15B (Bidirectional Data I/O) B
  54. I/O16B (Bidirectional Data I/O) B
  55. I/O17B (Bidirectional Data I/O) B
  56. I/O18B (Bidirectional Data I/O) B

Functional Features

  • Bidirectional voltage level translation between two independent ports (A and B)
  • Supports voltage translation from 1.65V

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74CB3T16212DGGR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74CB3T16212DGGR in technical solutions:

  1. Q: What is SN74CB3T16212DGGR? A: SN74CB3T16212DGGR is a high-performance, low-power, 24-bit FET bus switch with 5V tolerant inputs and outputs.

  2. Q: What are the typical applications of SN74CB3T16212DGGR? A: SN74CB3T16212DGGR is commonly used for level shifting, signal routing, and multiplexing in various digital systems.

  3. Q: What is the voltage range supported by SN74CB3T16212DGGR? A: SN74CB3T16212DGGR supports a voltage range from 1.65V to 3.6V.

  4. Q: How many channels does SN74CB3T16212DGGR have? A: SN74CB3T16212DGGR has 24 channels, which can be independently controlled.

  5. Q: What is the maximum data rate supported by SN74CB3T16212DGGR? A: SN74CB3T16212DGGR supports a maximum data rate of 400 Mbps.

  6. Q: Can SN74CB3T16212DGGR handle bidirectional signals? A: Yes, SN74CB3T16212DGGR supports bidirectional signals, allowing data transmission in both directions.

  7. Q: Does SN74CB3T16212DGGR have built-in ESD protection? A: Yes, SN74CB3T16212DGGR has built-in ESD protection, ensuring robustness against electrostatic discharge.

  8. Q: What is the power supply voltage required for SN74CB3T16212DGGR? A: SN74CB3T16212DGGR requires a power supply voltage of 1.65V to 3.6V.

  9. Q: Can SN74CB3T16212DGGR be used in hot-swapping applications? A: Yes, SN74CB3T16212DGGR supports hot-swapping, allowing it to be inserted or removed from a live circuit without causing damage.

  10. Q: Is SN74CB3T16212DGGR available in different package options? A: Yes, SN74CB3T16212DGGR is available in various package options, such as TSSOP and VQFN, providing flexibility for different design requirements.

Please note that these answers are general and may vary depending on the specific application and requirements.