Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74CBTD16210DLR
Lihat Butiran Helaian data

SN74CBTD16210DLR

Product Overview

Category

SN74CBTD16210DLR belongs to the category of digital multiplexers/demultiplexers.

Use

It is commonly used in digital systems for data routing and signal switching applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families
  • ESD protection on all inputs and outputs

Package

SN74CBTD16210DLR is available in a small-outline integrated circuit (SOIC) package.

Essence

The essence of SN74CBTD16210DLR lies in its ability to efficiently control the flow of digital signals within a system, enabling effective data routing and signal switching.

Packaging/Quantity

SN74CBTD16210DLR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Number of Channels: 16
  • Input Voltage Range: 2 V to 5.5 V
  • Output Voltage Range: 0 V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 3.8 ns (max)
  • Supply Current: 1 μA (typ)

Detailed Pin Configuration

  1. A0
  2. A1
  3. A2
  4. A3
  5. A4
  6. A5
  7. A6
  8. A7
  9. A8
  10. A9
  11. A10
  12. A11
  13. OE#
  14. Y0
  15. Y1
  16. Y2
  17. Y3
  18. Y4
  19. Y5
  20. Y6
  21. Y7
  22. Y8
  23. Y9
  24. Y10
  25. Y11
  26. GND
  27. VCC
  28. B0
  29. B1
  30. B2
  31. B3
  32. B4
  33. B5
  34. B6
  35. B7
  36. B8
  37. B9
  38. B10
  39. B11

Functional Features

  • Bidirectional data flow
  • Low ON-state resistance
  • High OFF-state impedance
  • Enable/disable control for each channel
  • ESD protection on all inputs and outputs

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data routing.
  • Low power consumption helps in reducing overall system energy requirements.
  • Wide operating voltage range ensures compatibility with various logic families.
  • ESD protection safeguards the device from electrostatic discharge.

Disadvantages

  • Limited number of channels (16) may not be sufficient for certain complex applications.
  • Propagation delay time (3.8 ns max) may introduce latency in time-critical systems.

Working Principles

SN74CBTD16210DLR operates based on the principles of multiplexing and demultiplexing. It uses a combination of control signals and input/output lines to selectively route digital signals between different channels. The bidirectional nature of the device allows for both data transmission and reception.

Detailed Application Field Plans

SN74CBTD16210DLR finds extensive use in various digital systems, including but not limited to: - Data communication networks - Computer peripherals - Industrial automation - Test and measurement equipment - Audio/video signal routing

Detailed and Complete Alternative Models

  1. SN74CBTD3306CPW - 8-channel digital multiplexer/demultiplexer
  2. SN74CBTD3384PW - 20-channel digital multiplexer/demultiplexer
  3. SN74CBTD3861PW - 32-channel digital multiplexer/demultiplexer
  4. SN74CBTD6800PWR - 64-channel digital multiplexer/demultiplexer

These alternative models offer varying channel counts to suit different application requirements.

Word count: 495 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74CBTD16210DLR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74CBTD16210DLR in technical solutions:

  1. Q: What is SN74CBTD16210DLR? A: SN74CBTD16210DLR is a high-speed, low-power 20-bit bus switch with 3-state outputs. It is commonly used for multiplexing or demultiplexing digital signals in various technical applications.

  2. Q: What is the operating voltage range of SN74CBTD16210DLR? A: The operating voltage range of SN74CBTD16210DLR is typically between 2.3V and 3.6V.

  3. Q: What is the maximum data rate supported by SN74CBTD16210DLR? A: SN74CBTD16210DLR supports a maximum data rate of up to 400 Mbps.

  4. Q: Can SN74CBTD16210DLR be used for bidirectional communication? A: Yes, SN74CBTD16210DLR can be used for bidirectional communication as it has separate output-enable (OE) inputs for each direction.

  5. Q: How many channels does SN74CBTD16210DLR have? A: SN74CBTD16210DLR has 20 channels, allowing it to handle 20 different digital signals.

  6. Q: What is the typical propagation delay of SN74CBTD16210DLR? A: The typical propagation delay of SN74CBTD16210DLR is around 2.8 ns.

  7. Q: Can SN74CBTD16210DLR handle level shifting between different voltage domains? A: Yes, SN74CBTD16210DLR can handle level shifting between different voltage domains as long as the voltage levels are within its operating range.

  8. Q: What is the power supply current consumption of SN74CBTD16210DLR? A: The power supply current consumption of SN74CBTD16210DLR is typically around 5 mA.

  9. Q: Can SN74CBTD16210DLR be used in hot-swapping applications? A: Yes, SN74CBTD16210DLR supports hot-swapping, allowing it to be inserted or removed from a live circuit without causing damage.

  10. Q: What package does SN74CBTD16210DLR come in? A: SN74CBTD16210DLR is available in a 56-pin TSSOP (Thin Shrink Small Outline Package) package.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.