Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74CBTD3305CPWR
Lihat Butiran Helaian data

SN74CBTD3305CPWR

Product Overview

  • Category: Integrated Circuit
  • Use: Level Shifter and Bus Switch
  • Characteristics: Low Voltage, High-Speed, Bidirectional
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: A versatile level shifter and bus switch integrated circuit designed for low voltage applications.
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Logic Voltage Range: 1.2V to 3.6V
  • Maximum Data Rate: 100 Mbps
  • Number of Channels: 4
  • On-State Resistance: 5 Ohms
  • Input/Output Capacitance: 4 pF
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74CBTD3305CPWR has a total of 20 pins, which are divided as follows:

  • Pin 1: OE (Output Enable) for Channel 1
  • Pin 2: I/O1 (Bidirectional Data) for Channel 1
  • Pin 3: GND (Ground)
  • Pin 4: I/O2 (Bidirectional Data) for Channel 2
  • Pin 5: VCC (Supply Voltage)
  • Pin 6: I/O3 (Bidirectional Data) for Channel 3
  • Pin 7: GND (Ground)
  • Pin 8: I/O4 (Bidirectional Data) for Channel 4
  • Pin 9: OE (Output Enable) for Channel 4
  • Pin 10: GND (Ground)
  • Pin 11: I/O4 (Bidirectional Data) for Channel 4
  • Pin 12: VCC (Supply Voltage)
  • Pin 13: I/O3 (Bidirectional Data) for Channel 3
  • Pin 14: GND (Ground)
  • Pin 15: I/O2 (Bidirectional Data) for Channel 2
  • Pin 16: OE (Output Enable) for Channel 2
  • Pin 17: GND (Ground)
  • Pin 18: I/O1 (Bidirectional Data) for Channel 1
  • Pin 19: VCC (Supply Voltage)
  • Pin 20: OE (Output Enable) for Channel 3

Functional Features

  • Bidirectional level shifting between two voltage domains.
  • Low on-state resistance allows for minimal signal distortion.
  • High-speed operation enables efficient data transfer.
  • Output enable pins provide control over individual channels.
  • Wide supply voltage range ensures compatibility with various systems.

Advantages and Disadvantages

Advantages: - Versatile level shifter suitable for a wide range of applications. - Low voltage operation saves power and reduces heat dissipation. - Compact TSSOP package offers space-saving benefits. - High-speed performance enables efficient data transmission.

Disadvantages: - Limited number of channels may not be sufficient for complex systems. - On-state resistance may introduce slight signal attenuation. - Operating temperature range may restrict usage in extreme environments.

Working Principles

The SN74CBTD3305CPWR operates by utilizing a combination of MOSFETs and CMOS technology. It acts as a bidirectional level shifter, allowing for seamless communication between devices operating at different voltage levels. The integrated circuit features four independent channels, each capable of shifting signals between two voltage domains. The output enable pins provide control over the direction of data flow, enabling selective channel activation. The low on-state resistance ensures minimal signal distortion during level shifting operations.

Detailed Application Field Plans

The SN74CBTD3305CPWR finds application in various fields, including:

  1. Consumer Electronics: Used in smartphones, tablets, and portable devices for level shifting between different voltage domains.
  2. Industrial Automation: Enables communication between devices operating at different voltage levels in industrial control systems.
  3. Automotive Electronics: Facilitates data transfer between components with varying voltage requirements in automotive applications.
  4. IoT (Internet of Things): Allows for seamless integration of sensors and actuators operating at different voltage levels in IoT devices.
  5. Communication Systems: Used in networking equipment to interface between different voltage domains.

Detailed and Complete Alternative Models

  1. SN74CBTD3306CPWR: Similar to SN74CBTD3305CPWR but with six channels instead of four.
  2. SN74CBTD3384PW: Eight-channel bidirectional level shifter with enhanced features.
  3. SN74CBTD3257CDBR: Quad 2:1 multiplexer/demultiplexer with level shifting capabilities.
  4. SN74CBTD3861PWR: Twelve-channel level shifter and bus switch for high-density applications.

These alternative models offer similar functionality to the SN74CBTD3305CPWR but may

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74CBTD3305CPWR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74CBTD3305CPWR:

  1. Q: What is SN74CBTD3305CPWR? A: SN74CBTD3305CPWR is a multiplexer/demultiplexer IC (Integrated Circuit) that can be used for signal routing and level shifting in various technical solutions.

  2. Q: What is the operating voltage range of SN74CBTD3305CPWR? A: The operating voltage range of SN74CBTD3305CPWR is typically between 1.65V and 3.6V.

  3. Q: How many channels does SN74CBTD3305CPWR have? A: SN74CBTD3305CPWR has 4 bidirectional channels, which means it can handle up to 4 different signals simultaneously.

  4. Q: Can SN74CBTD3305CPWR be used for level shifting between different voltage domains? A: Yes, SN74CBTD3305CPWR can be used as a level shifter to interface signals between different voltage domains, such as 3.3V and 5V.

  5. Q: What is the maximum data rate supported by SN74CBTD3305CPWR? A: SN74CBTD3305CPWR supports a maximum data rate of 100 Mbps, making it suitable for many digital communication applications.

  6. Q: Does SN74CBTD3305CPWR require external pull-up or pull-down resistors? A: No, SN74CBTD3305CPWR has built-in weak pull-up and pull-down resistors, eliminating the need for external resistors in most cases.

  7. Q: Can SN74CBTD3305CPWR be used for bidirectional communication? A: Yes, SN74CBTD3305CPWR supports bidirectional communication, allowing signals to be transmitted in both directions.

  8. Q: What is the power supply current consumption of SN74CBTD3305CPWR? A: The power supply current consumption of SN74CBTD3305CPWR is typically around 1 mA, making it suitable for low-power applications.

  9. Q: Can SN74CBTD3305CPWR be used in automotive applications? A: Yes, SN74CBTD3305CPWR is designed to meet automotive industry standards and can be used in automotive applications.

  10. Q: Are there any specific layout considerations for using SN74CBTD3305CPWR? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper signal integrity and minimize noise interference.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.