Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74HC4851DR
Lihat Butiran Helaian data

SN74HC4851DR

Product Overview

  • Category: Integrated Circuit
  • Use: Analog Multiplexer/Demultiplexer
  • Characteristics: High-Speed CMOS Logic, 8-Channel, Single-Ended or Differential Input
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: A multiplexer/demultiplexer IC that allows for the selection of one input from multiple sources and routing it to a single output.
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 2V to 6V
  • On-State Resistance: 70Ω (typical)
  • Channel-to-Channel Crosstalk: -80dB (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Input Signal Range: 0V to VCC
  • Output Signal Range: 0V to VCC

Detailed Pin Configuration

The SN74HC4851DR has a total of 16 pins. The pin configuration is as follows:

  1. S0: Channel Selection Input
  2. S1: Channel Selection Input
  3. S2: Channel Selection Input
  4. E: Enable Input
  5. I/O0: Analog Input/Output 0
  6. I/O1: Analog Input/Output 1
  7. I/O2: Analog Input/Output 2
  8. I/O3: Analog Input/Output 3
  9. I/O4: Analog Input/Output 4
  10. I/O5: Analog Input/Output 5
  11. I/O6: Analog Input/Output 6
  12. I/O7: Analog Input/Output 7
  13. GND: Ground
  14. COM: Common Terminal
  15. VCC: Power Supply
  16. NC: No Connection

Functional Features

  • 8-channel multiplexer/demultiplexer
  • Single-ended or differential input selection
  • Low power consumption
  • High-speed operation
  • Break-before-make switching action
  • Wide operating voltage range

Advantages and Disadvantages

Advantages: - Versatile multiplexing/demultiplexing functionality - High-speed operation for time-critical applications - Low power consumption for energy efficiency - Wide operating voltage range for compatibility with various systems

Disadvantages: - Limited number of channels (8) - Break-before-make switching action may introduce a brief interruption in the output signal during channel switching

Working Principles

The SN74HC4851DR is based on CMOS technology and operates as an analog multiplexer/demultiplexer. It uses control signals (S0, S1, S2) to select one of the eight input channels and route it to the output pin (COM). The E (Enable) input controls the overall operation of the IC. When enabled, the selected input is connected to the output, allowing the transmission of analog signals.

Detailed Application Field Plans

The SN74HC4851DR finds applications in various fields, including:

  1. Communication Systems: Used for signal routing and switching in telecommunication networks.
  2. Audio/Video Equipment: Enables the selection of different audio/video sources for output.
  3. Test and Measurement Instruments: Allows for the multiplexing of test signals for analysis and measurement purposes.
  4. Industrial Automation: Used in control systems for signal routing and data acquisition.
  5. Medical Devices: Enables the selection of different sensor inputs for monitoring and diagnostics.

Detailed and Complete Alternative Models

  1. CD4051B: 8-Channel Analog Multiplexer/Demultiplexer, CMOS Logic, DIP Package
  2. ADG508F: 8-Channel Analog Multiplexer/Demultiplexer, CMOS Logic, LFCSP Package
  3. MAX4617: 8-Channel Analog Multiplexer/Demultiplexer, CMOS Logic, SOIC Package

These alternative models offer similar functionality and can be used as replacements for the SN74HC4851DR in various applications.

Word count: 500 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74HC4851DR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74HC4851DR:

  1. Q: What is SN74HC4851DR? A: SN74HC4851DR is a multiplexer/demultiplexer IC (Integrated Circuit) that allows multiple analog or digital signals to be routed through a single channel.

  2. Q: What is the purpose of using SN74HC4851DR in technical solutions? A: SN74HC4851DR is commonly used to expand the number of input/output channels in electronic systems, enabling efficient signal routing and selection.

  3. Q: How many channels does SN74HC4851DR support? A: SN74HC4851DR has 8 channels, which means it can handle up to 8 different signals simultaneously.

  4. Q: Can SN74HC4851DR handle both analog and digital signals? A: Yes, SN74HC4851DR is designed to handle both analog and digital signals, making it versatile for various applications.

  5. Q: What is the voltage range supported by SN74HC4851DR? A: SN74HC4851DR supports a wide voltage range from 2V to 6V, making it compatible with most common electronic systems.

  6. Q: How does SN74HC4851DR select between different channels? A: SN74HC4851DR uses control pins to select the desired channel, allowing the user to route the input signal to the desired output channel.

  7. Q: Can SN74HC4851DR be cascaded to increase the number of channels? A: Yes, multiple SN74HC4851DR ICs can be cascaded together to increase the number of channels available in a system.

  8. Q: What is the maximum data rate supported by SN74HC4851DR? A: SN74HC4851DR can handle data rates up to 200 MHz, making it suitable for high-speed applications.

  9. Q: Does SN74HC4851DR require external power supply or voltage regulation? A: Yes, SN74HC4851DR requires an external power supply and voltage regulation to operate correctly within the specified voltage range.

  10. Q: What are some common applications of SN74HC4851DR? A: SN74HC4851DR is commonly used in audio/video systems, communication devices, industrial automation, and other applications where signal routing and selection are required.

Please note that these answers are general and may vary depending on specific use cases and requirements.