Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74HCT374DBR
Lihat Butiran Helaian data

SN74HCT374DBR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop
  • Characteristics: High-speed, CMOS compatible, 3-state outputs
  • Package: SSOP-20
  • Essence: D-type flip-flop with 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • High-Level Input Voltage: 2V
  • Low-Level Input Voltage: 0.8V
  • High-Level Output Voltage: 4.4V
  • Low-Level Output Voltage: 0.1V
  • Maximum Operating Frequency: 70MHz
  • Propagation Delay Time: 14ns
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74HCT374DBR has a total of 20 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data input 0)
  3. D1 (Data input 1)
  4. D2 (Data input 2)
  5. D3 (Data input 3)
  6. D4 (Data input 4)
  7. D5 (Data input 5)
  8. D6 (Data input 6)
  9. D7 (Data input 7)
  10. OE (Output enable)
  11. CP (Clock pulse)
  12. MR (Master reset)
  13. Q0 (Flip-flop output 0)
  14. Q1 (Flip-flop output 1)
  15. Q2 (Flip-flop output 2)
  16. Q3 (Flip-flop output 3)
  17. Q4 (Flip-flop output 4)
  18. Q5 (Flip-flop output 5)
  19. Q6 (Flip-flop output 6)
  20. VCC (Supply voltage)

Functional Features

The SN74HCT374DBR is a D-type flip-flop with 3-state outputs. It has eight data inputs (D0-D7) and eight corresponding flip-flop outputs (Q0-Q7). The flip-flops are clocked by the CP input, and the outputs can be enabled or disabled using the OE input. The MR input allows for a master reset of all flip-flops.

Advantages and Disadvantages

Advantages: - High-speed operation - CMOS compatible inputs - 3-state outputs allow for bus sharing

Disadvantages: - Limited operating frequency compared to some other flip-flops - Requires external clock signal for proper operation

Working Principles

The SN74HCT374DBR operates based on the principles of D-type flip-flops. The data inputs (D0-D7) are latched into their corresponding flip-flops when a clock pulse (CP) is applied. The outputs (Q0-Q7) reflect the state of the inputs at the time of the clock pulse. The outputs can be enabled or disabled using the output enable (OE) input. The master reset (MR) input resets all flip-flops to a known state.

Detailed Application Field Plans

The SN74HCT374DBR is commonly used in various digital systems where the storage and transfer of data is required. Some application fields include:

  1. Microcontrollers: Used for storing and transferring data between different parts of the microcontroller.
  2. Communication Systems: Used for buffering and synchronizing data in communication protocols.
  3. Memory Systems: Used for address decoding and data storage in memory modules.
  4. Data Acquisition Systems: Used for capturing and storing analog signals in digital form.

Detailed and Complete Alternative Models

  1. SN74HCT374N: DIP-20 package, same functionality as SN74HCT374DBR.
  2. MC74HCT374AN: DIP-20 package, similar functionality to SN74HCT374DBR.

These alternative models provide similar functionality and can be used as replacements for the SN74HCT374DBR in various applications.

Word count: 436 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74HCT374DBR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74HCT374DBR:

  1. Question: What is SN74HCT374DBR?
    - Answer: SN74HCT374DBR is a type of integrated circuit (IC) commonly used as an octal D-type flip-flop with 3-state outputs.

  2. Question: What is the purpose of SN74HCT374DBR?
    - Answer: SN74HCT374DBR is used for storing and transferring data in digital systems. It can be used for various applications such as data storage, address decoding, and bus interfacing.

  3. Question: What is the voltage range supported by SN74HCT374DBR?
    - Answer: SN74HCT374DBR supports a voltage range of 4.5V to 5.5V.

  4. Question: How many flip-flops are there in SN74HCT374DBR?
    - Answer: SN74HCT374DBR consists of 8 flip-flops, making it an octal (8-bit) device.

  5. Question: What is the maximum clock frequency supported by SN74HCT374DBR?
    - Answer: SN74HCT374DBR can operate at a maximum clock frequency of 25 MHz.

  6. Question: Can SN74HCT374DBR be used in both parallel and serial data transfer?
    - Answer: Yes, SN74HCT374DBR can be used for both parallel and serial data transfer depending on the configuration and connection.

  7. Question: What is the output drive capability of SN74HCT374DBR?
    - Answer: SN74HCT374DBR has a typical output drive capability of ±6 mA.

  8. Question: Is SN74HCT374DBR compatible with TTL logic levels?
    - Answer: Yes, SN74HCT374DBR is compatible with both CMOS and TTL logic levels.

  9. Question: Can SN74HCT374DBR be cascaded to increase the number of flip-flops?
    - Answer: Yes, multiple SN74HCT374DBR ICs can be cascaded together to increase the number of flip-flops and achieve larger data storage capabilities.

  10. Question: What are some typical applications of SN74HCT374DBR?
    - Answer: SN74HCT374DBR is commonly used in microcontrollers, memory systems, data buses, address decoding circuits, and other digital systems where data storage and transfer are required.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.