Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN75161BNG4
Lihat Butiran Helaian data

SN75161BNG4

Product Overview

  • Category: Integrated Circuit
  • Use: Line Driver/Receiver
  • Characteristics: High-speed, Low-power, Differential Bus Transceiver
  • Package: DIP (Dual In-line Package)
  • Essence: Transmits and receives data over long distances in noisy environments
  • Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

  • Supply Voltage Range: 4.75V to 5.25V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 10 Mbps
  • Number of Channels: 1
  • Input/Output Type: Differential
  • Output Current: ±60 mA
  • Propagation Delay Time: 50 ns (max)
  • Power Dissipation: 500 mW (max)

Detailed Pin Configuration

The SN75161BNG4 has a total of 16 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. A (Input A)
  3. B (Input B)
  4. Y (Output Y)
  5. Z (Output Z)
  6. VCC (Positive Power Supply)
  7. RE (Receiver Enable)
  8. DE (Driver Enable)
  9. RO (Receiver Output)
  10. DI (Driver Input)
  11. REN (Receiver Enable Not)
  12. DEN (Driver Enable Not)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. NC (No Connection)

Functional Features

  • High-speed data transmission up to 10 Mbps
  • Low-power consumption for energy-efficient operation
  • Differential bus transceiver for noise immunity
  • Receiver and driver enable/disable control
  • Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Noise immunity due to differential bus transceiver - Enable/disable control for flexibility

Disadvantages: - Limited number of channels (only 1) - Requires external components for complete functionality

Working Principles

The SN75161BNG4 is designed to transmit and receive data over long distances in noisy environments. It utilizes a differential bus transceiver, which helps in reducing the impact of noise on the transmitted signals. The receiver and driver enable/disable control allows for flexible operation based on specific requirements.

Detailed Application Field Plans

The SN75161BNG4 can be used in various applications, including:

  1. Industrial Automation: Used for communication between sensors and controllers in industrial automation systems.
  2. Telecommunications: Enables reliable data transmission in telecommunication networks.
  3. Automotive Electronics: Facilitates communication between different electronic modules in automotive systems.
  4. Medical Equipment: Ensures accurate data transfer in medical devices and equipment.
  5. Consumer Electronics: Used in audio/video equipment, gaming consoles, and other consumer electronics for data transmission.

Detailed and Complete Alternative Models

  1. SN75162BNG4: Similar to SN75161BNG4 but with two channels instead of one.
  2. MAX485CPA: RS-485/RS-422 compatible transceiver with multiple channels.
  3. LTC2874IDD#PBF: High-speed differential bus transceiver with advanced features.
  4. ADM2486BRWZ: Isolated RS-485 transceiver with integrated protection features.

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

Word count: 408 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN75161BNG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN75161BNG4 in technical solutions:

  1. Q: What is SN75161BNG4? A: SN75161BNG4 is a quad differential line receiver IC commonly used in communication systems.

  2. Q: What is the operating voltage range of SN75161BNG4? A: The operating voltage range of SN75161BNG4 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum data rate supported by SN75161BNG4? A: SN75161BNG4 can support data rates up to 20 Mbps.

  4. Q: Can SN75161BNG4 be used for RS-485 communication? A: Yes, SN75161BNG4 is suitable for RS-485 communication due to its differential input/output capability.

  5. Q: Does SN75161BNG4 have built-in ESD protection? A: Yes, SN75161BNG4 has built-in ESD protection on all pins.

  6. Q: What is the typical propagation delay of SN75161BNG4? A: The typical propagation delay of SN75161BNG4 is around 8 ns.

  7. Q: Can SN75161BNG4 operate in harsh industrial environments? A: Yes, SN75161BNG4 is designed to operate reliably in harsh industrial environments with extended temperature ranges.

  8. Q: Is SN75161BNG4 compatible with TTL logic levels? A: Yes, SN75161BNG4 is compatible with both TTL and CMOS logic levels.

  9. Q: Can SN75161BNG4 be used in multi-drop bus applications? A: Yes, SN75161BNG4 can be used in multi-drop bus applications due to its differential input/output capability.

  10. Q: What is the package type of SN75161BNG4? A: SN75161BNG4 is available in a 16-pin DIP (Dual In-line Package) or SOIC (Small Outline Integrated Circuit) package.

Please note that these answers are general and may vary depending on specific application requirements.