TCA6408ARSVR belongs to the category of integrated circuits (ICs).
This product is primarily used for input/output (I/O) expansion in various electronic devices and systems.
The TCA6408ARSVR is available in a small-sized VQFN package, measuring 16-pin. It is typically sold in reels or tubes containing multiple units.
The pin configuration of TCA6408ARSVR is as follows:
```
| | | 1 16 | | | | 2 15 | | | | 3 14 | | | | 4 13 | | | | 5 12 | | | | 6 11 | | | | 7 10 | | | | 8 9 | |_______________| ```
TCA6408ARSVR operates by receiving commands and data through the I2C bus from a master device, typically a microcontroller. The received instructions are used to configure the behavior of each I/O pin. The device can be programmed to function as either an input or an output, allowing for versatile usage. When configured as an input, the pins can be monitored for changes, and when configured as an output, they can drive external devices.
TCA6408ARSVR finds applications in various fields, including but not limited to:
Several alternative models are available in the market that offer similar functionality to TCA6408ARSVR. Some notable alternatives include:
Sure! Here are 10 common questions and answers related to the application of TCA6408ARSVR in technical solutions:
Q: What is TCA6408ARSVR? A: TCA6408ARSVR is a 8-bit I/O expander with I2C interface, which can be used to increase the number of available GPIO pins in a microcontroller-based system.
Q: What is the operating voltage range of TCA6408ARSVR? A: The operating voltage range of TCA6408ARSVR is typically between 1.65V and 5.5V.
Q: How many GPIO pins does TCA6408ARSVR provide? A: TCA6408ARSVR provides 8 GPIO pins that can be configured as inputs or outputs.
Q: Can TCA6408ARSVR handle both digital input and output signals? A: Yes, TCA6408ARSVR can be configured as either input or output for each individual pin.
Q: What is the maximum current that TCA6408ARSVR can source or sink per GPIO pin? A: TCA6408ARSVR can source or sink up to 25mA per GPIO pin.
Q: Can TCA6408ARSVR be cascaded to expand the number of GPIO pins further? A: Yes, multiple TCA6408ARSVR devices can be cascaded together using the I2C bus to expand the number of available GPIO pins.
Q: What is the I2C address of TCA6408ARSVR? A: The I2C address of TCA6408ARSVR is determined by the state of its three address pins (A0, A1, and A2), allowing up to 8 devices on the same I2C bus.
Q: Can TCA6408ARSVR be used with both 3.3V and 5V microcontrollers? A: Yes, TCA6408ARSVR is compatible with both 3.3V and 5V microcontrollers as it operates within their voltage range.
Q: Does TCA6408ARSVR have any built-in pull-up resistors for the GPIO pins? A: Yes, TCA6408ARSVR has programmable internal pull-up resistors that can be enabled or disabled for each GPIO pin.
Q: What are some common applications of TCA6408ARSVR? A: TCA6408ARSVR is commonly used in various applications such as keypad scanning, LED control, digital sensors interfacing, and general-purpose I/O expansion in embedded systems.
Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.