Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TCA9548AMRGER
Lihat Butiran Helaian data

TCA9548AMRGER

Product Overview

Category

TCA9548AMRGER belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a multiplexer/demultiplexer switch for I2C-bus applications.

Characteristics

  • Allows multiple devices to share a single I2C bus
  • Provides bidirectional voltage-level translation between different I2C bus voltages
  • Supports hot insertion
  • Low standby current consumption
  • Compatible with both 3.3V and 5V systems

Package

TCA9548AMRGER is available in a small 24-pin VQFN package.

Essence

The essence of TCA9548AMRGER lies in its ability to simplify I2C bus management by enabling communication between multiple devices using a single bus.

Packaging/Quantity

This product is typically sold in reels, with each reel containing a specific quantity of TCA9548AMRGER ICs.

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • I2C Bus Frequency: Up to 400kHz
  • Number of Channels: 8
  • Address Selection: 3 hardware address pins (A0, A1, A2)

Detailed Pin Configuration

  1. SDA: Serial Data Input/Output
  2. SCL: Serial Clock Input
  3. EN: Enable Input
  4. A0: Hardware Address Bit 0
  5. A1: Hardware Address Bit 1
  6. A2: Hardware Address Bit 2
  7. GND: Ground
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection
  21. NC: No Connection
  22. VCC: Supply Voltage
  23. SDA1: Serial Data Input/Output for Channel 1
  24. SCL1: Serial Clock Input for Channel 1

Functional Features

  • Allows connection of multiple I2C devices to a single bus
  • Enables individual selection and communication with each device
  • Supports voltage-level translation between different I2C bus voltages
  • Provides hot insertion capability, allowing devices to be added or removed without disrupting the bus

Advantages and Disadvantages

Advantages

  • Simplifies I2C bus management by reducing the number of required bus lines
  • Enables efficient utilization of the I2C bus by sharing it among multiple devices
  • Supports voltage compatibility between different I2C devices
  • Facilitates hot swapping of devices without interrupting the bus operation

Disadvantages

  • Limited to 8 channels, which may not be sufficient for applications requiring a larger number of devices
  • Requires careful address selection to avoid conflicts with other I2C devices on the bus

Working Principles

TCA9548AMRGER operates as a multiplexer/demultiplexer switch for I2C-bus applications. It allows multiple I2C devices to share a single bus by providing channel selection functionality. The device uses hardware address pins (A0, A1, A2) to set its own address, enabling communication with specific channels.

When a particular channel is selected, TCA9548AMRGER routes the I2C signals from the master device to the corresponding channel, allowing communication with the desired device connected to that channel. This enables efficient utilization of the I2C bus and simplifies the management of multiple devices.

Detailed Application Field Plans

TCA9548AMRGER finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Internet of Things (IoT) devices

In industrial automation, this IC can be used to connect multiple sensors or actuators to a central control unit, reducing the complexity of wiring and improving system scalability. In consumer electronics, it enables communication between different modules within a device, such as a smart TV or a home automation system.

Automotive systems benefit from TCA9548AMRGER by allowing multiple devices, such as sensors and displays, to share a single I2C bus, reducing wiring complexity and cost. Medical devices, such as patient monitoring systems, can utilize this IC to connect various sensors and peripherals to a central processing unit.

In the IoT domain, TCA9548AMRGER facilitates communication between multiple devices in a network, enabling efficient data exchange and control.

Detailed and Complete Alternative

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TCA9548AMRGER dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TCA9548AMRGER in technical solutions:

  1. Q: What is the TCA9548AMRGER? A: The TCA9548AMRGER is a multiplexer/demultiplexer IC that allows multiple I2C devices to share the same I2C bus.

  2. Q: How many channels does the TCA9548AMRGER have? A: The TCA9548AMRGER has 8 channels, allowing you to connect up to 8 different I2C devices.

  3. Q: How do I select a specific channel on the TCA9548AMRGER? A: You can select a specific channel by writing the corresponding channel number to the control register of the TCA9548AMRGER.

  4. Q: Can I use multiple TCA9548AMRGERs together to expand the number of channels? A: Yes, you can cascade multiple TCA9548AMRGERs together to expand the number of available channels.

  5. Q: What is the maximum operating voltage for the TCA9548AMRGER? A: The TCA9548AMRGER operates at a maximum voltage of 5.5V.

  6. Q: Does the TCA9548AMRGER support clock stretching? A: Yes, the TCA9548AMRGER supports clock stretching, allowing I2C devices to hold the clock line low if they need more time to process data.

  7. Q: Can I use the TCA9548AMRGER with other I2C devices that operate at different voltages? A: Yes, you can use level shifters or voltage translators to interface the TCA9548AMRGER with I2C devices operating at different voltages.

  8. Q: What is the maximum data rate supported by the TCA9548AMRGER? A: The TCA9548AMRGER supports a maximum data rate of 400 kHz.

  9. Q: Can I use the TCA9548AMRGER in both master and slave modes? A: No, the TCA9548AMRGER can only be used as a master device on the I2C bus.

  10. Q: Are there any limitations to the distance between the TCA9548AMRGER and the connected I2C devices? A: The distance between the TCA9548AMRGER and the connected I2C devices should be within the maximum allowable I2C bus length, typically a few meters.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.