Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TCAN1042HDRBTQ1
Lihat Butiran Helaian data

TCAN1042HDRBTQ1

Product Overview

  • Category: Automotive Communication and Networking
  • Use: High-Speed CAN Transceiver
  • Characteristics: Robust, Reliable, High-Speed Communication
  • Package: QFN (Quad Flat No-Lead)
  • Essence: Facilitates communication between electronic control units in automotive systems
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 5 Mbps
  • Operating Temperature Range: -40°C to +125°C
  • Transceiver Type: Differential Bus
  • Protection Features: Thermal Shutdown, Undervoltage Lockout, Overvoltage Protection

Detailed Pin Configuration

The TCAN1042HDRBTQ1 has the following pin configuration:

  1. VIO - Supply voltage for digital I/O pins
  2. GND - Ground
  3. TXD - Transmit Data
  4. RXD - Receive Data
  5. VCC - Supply voltage for transceiver
  6. STB - Standby Mode Control
  7. RS - Slope Control
  8. CANH - High-Level CAN Bus Line
  9. CANL - Low-Level CAN Bus Line
  10. VBAT - Battery Supply Voltage

Functional Features

  • Supports CAN FD (Flexible Data Rate) protocol
  • Compliant with ISO 11898-2 standard
  • Integrated slope control for improved electromagnetic compatibility
  • Low-power standby mode for reduced power consumption
  • Built-in protection features for enhanced reliability

Advantages and Disadvantages

Advantages

  • High-speed communication up to 5 Mbps
  • Robust design suitable for automotive applications
  • Wide operating temperature range (-40°C to +125°C)
  • Integrated protection features ensure system reliability
  • Supports CAN FD protocol for increased data throughput

Disadvantages

  • Limited to automotive applications
  • Requires external microcontroller for complete functionality

Working Principles

The TCAN1042HDRBTQ1 is a high-speed CAN transceiver designed for automotive communication systems. It operates by converting the digital signals from an electronic control unit (ECU) into differential voltage levels suitable for transmission over the CAN bus. The transceiver ensures reliable communication between different ECUs in the vehicle, enabling them to exchange information and coordinate their actions.

Detailed Application Field Plans

The TCAN1042HDRBTQ1 is widely used in various automotive applications, including:

  1. Engine Control Units (ECUs)
  2. Transmission Control Units (TCUs)
  3. Body Control Modules (BCMs)
  4. Anti-lock Braking Systems (ABS)
  5. Airbag Control Units (ACUs)
  6. Instrument Clusters
  7. Infotainment Systems

Detailed and Complete Alternative Models

  1. MCP2551: High-Speed CAN Transceiver by Microchip Technology
  2. SN65HVD230: CAN Transceiver with Standby Mode by Texas Instruments
  3. TJA1050: High-Speed CAN Transceiver by NXP Semiconductors
  4. MAX3051: Fault-Protected CAN Transceiver by Maxim Integrated

These alternative models offer similar functionality and can be considered as alternatives to the TCAN1042HDRBTQ1.

Word count: 389 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TCAN1042HDRBTQ1 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TCAN1042HDRBTQ1 in technical solutions:

1. What is TCAN1042HDRBTQ1? - TCAN1042HDRBTQ1 is a high-speed CAN transceiver with integrated isolation and an integrated Bluetooth Low Energy (BLE) controller.

2. What is the purpose of TCAN1042HDRBTQ1? - The purpose of TCAN1042HDRBTQ1 is to provide reliable communication between microcontrollers and CAN bus networks, while also offering wireless connectivity through BLE.

3. What are the key features of TCAN1042HDRBTQ1? - Some key features of TCAN1042HDRBTQ1 include high-speed data rates, integrated isolation, low power consumption, fault protection, and BLE connectivity.

4. How can TCAN1042HDRBTQ1 be used in technical solutions? - TCAN1042HDRBTQ1 can be used in various technical solutions that require CAN bus communication and wireless connectivity, such as automotive applications, industrial automation, and IoT devices.

5. What is the maximum data rate supported by TCAN1042HDRBTQ1? - TCAN1042HDRBTQ1 supports data rates up to 5 Mbps, making it suitable for high-speed CAN applications.

6. Can TCAN1042HDRBTQ1 be used in harsh environments? - Yes, TCAN1042HDRBTQ1 is designed to operate in harsh environments and is capable of withstanding high temperatures, voltage transients, and electromagnetic interference.

7. Does TCAN1042HDRBTQ1 support bus fault protection? - Yes, TCAN1042HDRBTQ1 provides bus fault protection, including thermal shutdown, short-circuit protection, and overvoltage protection.

8. How is the BLE functionality of TCAN1042HDRBTQ1 utilized? - The BLE functionality of TCAN1042HDRBTQ1 can be used to wirelessly configure and monitor the CAN bus network, as well as enable remote diagnostics and firmware updates.

9. Can TCAN1042HDRBTQ1 be used with different microcontrollers? - Yes, TCAN1042HDRBTQ1 is compatible with a wide range of microcontrollers that support CAN communication.

10. Is there any evaluation kit available for TCAN1042HDRBTQ1? - Yes, Texas Instruments provides an evaluation kit for TCAN1042HDRBTQ1, which includes all the necessary hardware and software to evaluate its performance and features.

Please note that these answers are general and may vary depending on the specific application and requirements.