Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TL16C752CIPFB
Lihat Butiran Helaian data

TL16C752CIPFB

Product Overview

Category

The TL16C752CIPFB belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial communication applications.

Characteristics

  • High-speed data transfer capability
  • Dual UART (Universal Asynchronous Receiver/Transmitter) channels
  • Support for various serial protocols
  • Low power consumption
  • Wide operating voltage range

Package

The TL16C752CIPFB is available in a plastic quad flat package (PQFP).

Essence

The essence of TL16C752CIPFB lies in its ability to facilitate reliable and efficient serial communication between devices.

Packaging/Quantity

The TL16C752CIPFB is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 1 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 48
  • UART Channels: 2
  • FIFO Buffer Size: 16 bytes
  • Supported Serial Protocols: RS-232, RS-485, IrDA, etc.

Detailed Pin Configuration

The TL16C752CIPFB has a total of 48 pins. Here is a detailed pin configuration:

  1. VCC
  2. GND
  3. CTS1
  4. RTS1
  5. RX1
  6. TX1
  7. DSR1
  8. DCD1
  9. RI1
  10. REFCLK1
  11. SLEEP#
  12. RESET#
  13. INT#
  14. RXRDY1
  15. TXRDY1
  16. RXFIFO1
  17. TXFIFO1
  18. CTS2
  19. RTS2
  20. RX2
  21. TX2
  22. DSR2
  23. DCD2
  24. RI2
  25. REFCLK2
  26. RXRDY2
  27. TXRDY2
  28. RXFIFO2
  29. TXFIFO2 30-48. NC (No Connection)

Functional Features

  1. Dual UART Channels: The TL16C752CIPFB integrates two independent UART channels, allowing simultaneous communication with multiple devices.
  2. FIFO Buffers: Each UART channel is equipped with a 16-byte FIFO buffer, enabling efficient data transfer and reducing the risk of data loss.
  3. Programmable Baud Rate Generator: This feature allows users to set the desired baud rate for each UART channel, providing flexibility in different communication scenarios.
  4. Interrupt Support: The IC supports interrupt-driven communication, allowing the host system to be notified when specific events occur, such as data reception or transmission completion.
  5. Sleep Mode: The TL16C752CIPFB offers a sleep mode, which reduces power consumption during idle periods, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

  • High-speed data transfer capability enables fast and efficient communication.
  • Dual UART channels allow simultaneous communication with multiple devices.
  • Support for various serial protocols enhances compatibility with different systems.
  • Low power consumption makes it suitable for battery-powered applications.
  • FIFO buffers reduce the risk of data loss during high-speed communication.

Disadvantages

  • Limited FIFO buffer size may pose challenges in scenarios requiring large data transfers.
  • Lack of built-in error detection and correction mechanisms may require additional components or software implementation.

Working Principles

The TL16C752CIPFB operates based on the principles of UART communication. It receives and transmits data in a serial format using asynchronous communication protocols. The UART channels handle data framing, error checking, and synchronization between the transmitting and receiving devices.

Detailed Application Field Plans

The TL16C752CIPFB finds applications in various fields, including but not limited to:

  1. Industrial Automation: Used for communication between PLCs (Programmable Logic Controllers), sensors, and other industrial devices.
  2. Telecommunications: Enables serial communication in telecommunication systems, such as modems and routers.
  3. Embedded Systems: Facilitates communication between microcontrollers and peripheral devices in embedded systems.
  4. Automotive Electronics: Used for communication between different electronic modules within vehicles, such as infotainment systems and engine control units.
  5. Medical Devices: Enables communication between medical equipment and external devices, such as monitoring systems or data loggers.

Detailed and Complete Alternative Models

  1. TL16C752BIPFB
  2. TL16C752DIPFB
  3. TL16C752EIPFB
  4. TL16C752FIPFB

These alternative models offer similar functionality and characteristics to the TL16C752CIPFB, providing options for different design

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TL16C752CIPFB dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TL16C752CIPFB in technical solutions:

  1. Q: What is TL16C752CIPFB? A: TL16C752CIPFB is a dual universal asynchronous receiver/transmitter (UART) integrated circuit that provides two full-duplex channels.

  2. Q: What are the key features of TL16C752CIPFB? A: Some key features include 128-byte FIFOs, programmable baud rate generators, support for IrDA infrared communication, and compatibility with various microcontrollers.

  3. Q: How can TL16C752CIPFB be used in technical solutions? A: TL16C752CIPFB can be used in applications requiring serial communication, such as industrial automation, embedded systems, robotics, and communication interfaces.

  4. Q: What is the maximum data transfer rate supported by TL16C752CIPFB? A: TL16C752CIPFB supports data rates up to 3 Mbps.

  5. Q: Can TL16C752CIPFB be used with both 3.3V and 5V systems? A: Yes, TL16C752CIPFB is compatible with both 3.3V and 5V systems.

  6. Q: Does TL16C752CIPFB support flow control? A: Yes, TL16C752CIPFB supports hardware flow control using RTS/CTS signals.

  7. Q: Can TL16C752CIPFB be used in multi-drop or multi-point configurations? A: Yes, TL16C752CIPFB supports multi-drop configurations using RS-485 transceivers and multi-point configurations using RS-422 transceivers.

  8. Q: Is TL16C752CIPFB compatible with popular communication protocols? A: Yes, TL16C752CIPFB is compatible with standard UART protocols like RS-232, RS-485, and RS-422.

  9. Q: Does TL16C752CIPFB have any built-in error detection or correction mechanisms? A: No, TL16C752CIPFB does not have built-in error detection or correction mechanisms. External error detection methods can be used if required.

  10. Q: Are there any evaluation boards or development kits available for TL16C752CIPFB? A: Yes, Texas Instruments provides evaluation boards and development kits that include TL16C752CIPFB for easy prototyping and testing.

Please note that these answers are general and may vary depending on the specific application and requirements.