Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TLV2773CDGSG4
Lihat Butiran Helaian data

TLV2773CDGSG4

Product Overview

Category

TLV2773CDGSG4 belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits where amplification and signal conditioning are required.

Characteristics

  • Low power consumption
  • Rail-to-rail input and output
  • Wide supply voltage range
  • High slew rate
  • Low input offset voltage
  • Small package size

Package

TLV2773CDGSG4 is available in a small-sized package, typically a 10-pin VSSOP (Very Small Outline Package).

Essence

The essence of TLV2773CDGSG4 lies in its ability to provide high-performance amplification and signal conditioning in a compact form factor.

Packaging/Quantity

This product is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1.5mV (maximum)
  • Slew Rate: 3.6V/µs (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. OUT1: Output 1
  2. IN-: Inverting Input
  3. IN+: Non-Inverting Input
  4. V-: Negative Power Supply
  5. V+: Positive Power Supply
  6. NC: No Connection
  7. OUT2: Output 2
  8. NC: No Connection
  9. NC: No Connection
  10. GND: Ground

Functional Features

  • Rail-to-rail input and output capability allows for maximum utilization of the supply voltage range.
  • Low power consumption makes it suitable for battery-powered applications.
  • High slew rate enables fast signal amplification and response.
  • Low input offset voltage ensures accurate signal conditioning.

Advantages and Disadvantages

Advantages

  • Wide supply voltage range allows for compatibility with various power sources.
  • Small package size saves board space in compact designs.
  • Rail-to-rail input and output capability enhances signal fidelity.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited number of channels (dual op-amp) compared to multi-channel options.
  • Relatively higher input offset voltage compared to some precision op-amps.

Working Principles

TLV2773CDGSG4 operates based on the principles of operational amplifiers. It amplifies the difference between its inverting and non-inverting inputs, producing an output voltage that is a multiple of this difference. The rail-to-rail input and output capability ensures that the amplified signal remains within the full range of the power supply voltages.

Detailed Application Field Plans

TLV2773CDGSG4 finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Battery-powered instrumentation 4. Portable medical devices 5. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to TLV2773CDGSG4 include: 1. LM358: Dual operational amplifier with similar characteristics 2. MCP6002: Dual operational amplifier with low power consumption 3. AD8628: Precision dual operational amplifier with low input offset voltage

(Note: This list is not exhaustive and there are several other alternatives available in the market.)

Word count: 410 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TLV2773CDGSG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TLV2773CDGSG4 in technical solutions:

  1. Q: What is TLV2773CDGSG4? A: TLV2773CDGSG4 is a dual operational amplifier with rail-to-rail input/output and low noise characteristics.

  2. Q: What are the key features of TLV2773CDGSG4? A: TLV2773CDGSG4 features low noise, wide supply voltage range, rail-to-rail inputs/outputs, and low input bias current.

  3. Q: What is the typical supply voltage range for TLV2773CDGSG4? A: The typical supply voltage range for TLV2773CDGSG4 is from 2.7V to 5.5V.

  4. Q: Can TLV2773CDGSG4 operate with a single supply voltage? A: Yes, TLV2773CDGSG4 can operate with a single supply voltage as low as 2.7V.

  5. Q: What is the input bias current of TLV2773CDGSG4? A: The input bias current of TLV2773CDGSG4 is typically 1 pA.

  6. Q: What is the maximum output current of TLV2773CDGSG4? A: The maximum output current of TLV2773CDGSG4 is typically 60 mA.

  7. Q: Can TLV2773CDGSG4 be used in precision applications? A: Yes, TLV2773CDGSG4 is suitable for precision applications due to its low offset voltage and low input bias current.

  8. Q: Is TLV2773CDGSG4 suitable for low-power applications? A: Yes, TLV2773CDGSG4 is designed for low-power applications and has a low quiescent current of typically 1.2 µA.

  9. Q: Can TLV2773CDGSG4 be used in automotive applications? A: Yes, TLV2773CDGSG4 is qualified for automotive applications and meets the AEC-Q100 standard.

  10. Q: What are some typical applications for TLV2773CDGSG4? A: TLV2773CDGSG4 can be used in battery-powered systems, sensor interfaces, portable medical devices, and audio amplification circuits.

Please note that these answers are general and may vary depending on specific use cases and requirements.