Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TPA311DGNRG4
Lihat Butiran Helaian data

TPA311DGNRG4

Product Overview

Category: Integrated Circuit (IC)

Use: Audio Amplifier

Characteristics: - High efficiency - Low distortion - Wide supply voltage range - Thermal and short-circuit protection - Flexible input/output configurations

Package: 8-Pin SOIC (Small Outline Integrated Circuit)

Essence: TPA311DGNRG4 is a high-performance audio amplifier IC designed for various audio applications.

Packaging/Quantity: The TPA311DGNRG4 is typically sold in reels of 2500 units.

Specifications

  • Supply Voltage Range: 4.5V to 26V
  • Output Power: Up to 50W per channel
  • Total Harmonic Distortion + Noise (THD+N): <0.1%
  • Efficiency: >90%
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPA311DGNRG4 has the following pin configuration:

  1. IN-
  2. IN+
  3. GND
  4. VCC
  5. SD
  6. MUTE
  7. OUT-
  8. OUT+

Functional Features

  • High Efficiency: The TPA311DGNRG4 offers high efficiency, resulting in reduced power consumption and heat dissipation.
  • Low Distortion: It provides low distortion audio output, ensuring high-quality sound reproduction.
  • Wide Supply Voltage Range: The IC can operate within a wide range of supply voltages, making it suitable for various applications.
  • Thermal and Short-Circuit Protection: Built-in protection mechanisms safeguard the IC from thermal overload and short-circuits.
  • Flexible Input/Output Configurations: The TPA311DGNRG4 supports multiple input and output configurations, allowing for versatile system integration.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Low distortion ensures high-quality audio output. - Wide supply voltage range enables compatibility with different power sources. - Built-in protection mechanisms enhance reliability and durability. - Flexible input/output configurations provide versatility in system design.

Disadvantages: - Limited output power compared to higher wattage amplifiers. - Requires additional components for a complete audio system setup.

Working Principles

The TPA311DGNRG4 operates as a class D amplifier, utilizing pulse-width modulation (PWM) techniques. It converts the input audio signal into a series of high-frequency pulses, which are then amplified by the power stage. The amplified pulses are filtered and reconstructed into an analog audio signal, resulting in high-fidelity sound reproduction.

Detailed Application Field Plans

The TPA311DGNRG4 is widely used in various audio applications, including: - Home theater systems - Automotive audio systems - Portable speakers - Professional audio equipment - Multimedia devices

Detailed and Complete Alternative Models

  1. TPA3116D2: Similar to TPA311DGNRG4 but with higher output power capability.
  2. TPA3255: A more advanced audio amplifier IC with even higher power output and additional features.
  3. TAS5611A: Another class D audio amplifier IC suitable for high-power audio applications.

These alternative models offer different specifications and features, allowing users to choose based on their specific requirements.

Word count: 345 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TPA311DGNRG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TPA311DGNRG4 in technical solutions:

  1. Q: What is the TPA311DGNRG4? A: The TPA311DGNRG4 is a digital audio amplifier integrated circuit (IC) designed for high-performance audio applications.

  2. Q: What is the power output of the TPA311DGNRG4? A: The TPA311DGNRG4 can deliver up to 50 watts per channel into 8 ohms or 100 watts per channel into 4 ohms.

  3. Q: Can the TPA311DGNRG4 be used in stereo or mono configurations? A: Yes, the TPA311DGNRG4 can be configured as a stereo amplifier or bridged to operate in mono mode.

  4. Q: What is the input voltage range of the TPA311DGNRG4? A: The TPA311DGNRG4 has an input voltage range of 4.5V to 26V, making it suitable for a wide range of power supply options.

  5. Q: Does the TPA311DGNRG4 support different audio input formats? A: Yes, the TPA311DGNRG4 supports both analog and digital audio inputs, including I2S, left-justified, right-justified, and TDM formats.

  6. Q: Can the TPA311DGNRG4 be used in battery-powered applications? A: Yes, the TPA311DGNRG4 has a low quiescent current and can be used in battery-powered applications with proper power management.

  7. Q: Does the TPA311DGNRG4 have built-in protection features? A: Yes, the TPA311DGNRG4 includes protection features such as thermal shutdown, overcurrent protection, and undervoltage lockout.

  8. Q: What is the efficiency of the TPA311DGNRG4? A: The TPA311DGNRG4 has a high efficiency of up to 90%, which helps minimize power dissipation and maximize battery life.

  9. Q: Can the TPA311DGNRG4 be used in automotive audio systems? A: Yes, the TPA311DGNRG4 is suitable for automotive applications and can operate in a wide temperature range.

  10. Q: Are there any evaluation boards or reference designs available for the TPA311DGNRG4? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and implement the TPA311DGNRG4 in their applications.

Please note that these answers are general and may vary depending on specific application requirements.