Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TPD3S716QDBQRQ1
Lihat Butiran Helaian data

TPD3S716QDBQRQ1

Product Overview

The TPD3S716QDBQRQ1 belongs to the category of integrated circuits and is specifically designed for use in electronic devices requiring protection from electrostatic discharge (ESD) and electrical overstress (EOS). This device offers characteristics such as high ESD protection, low capacitance, and a small package size. It is typically packaged in a small outline package (DSBGA) and is available in tape and reel packaging with a quantity of 3000 units per reel.

Specifications

  • Operating Voltage Range: 1.65V to 5.5V
  • ESD Protection: ±8kV Contact Discharge, ±15kV Air-Gap Discharge
  • Low Capacitance: 0.6pF (Typical)
  • Package Size: 1.5mm x 1.0mm DSBGA

Detailed Pin Configuration

The TPD3S716QDBQRQ1 features a total of 10 pins, including power supply pins, input/output pins, and ground pins. The detailed pin configuration is as follows: 1. Pin 1: VBUS 2. Pin 2: GND 3. Pin 3: D+ 4. Pin 4: D- 5. Pin 5: EN 6. Pin 6: GND 7. Pin 7: GND 8. Pin 8: VCC 9. Pin 9: GND 10. Pin 10: GND

Functional Features

  • Integrated ESD Protection
  • Low Clamping Voltage
  • Small Package Size
  • Low Capacitance
  • Power Supply UVLO (Undervoltage Lockout)

Advantages and Disadvantages

Advantages

  • High ESD Protection
  • Small Package Size
  • Low Capacitance
  • Power Supply UVLO

Disadvantages

  • Limited Operating Voltage Range
  • Sensitive to Improper Handling

Working Principles

The TPD3S716QDBQRQ1 works by diverting transient voltage events away from sensitive circuitry, thereby protecting the downstream electronics from damage due to ESD and EOS. When an ESD event occurs, the device clamps the voltage to a safe level and dissipates the energy to ground, preventing it from reaching the protected circuitry.

Detailed Application Field Plans

This device is commonly used in USB interfaces, HDMI ports, and other high-speed data interfaces where protection from ESD and EOS is critical. It is also suitable for use in portable electronic devices, such as smartphones, tablets, and laptops, to safeguard the internal circuitry from external voltage transients.

Detailed and Complete Alternative Models

  • TPD2E007: Dual-Channel ESD Protection Device
  • TPD4E001: Quad-Channel ESD Protection Device
  • TPD6S300: USB Type-C ESD Protection Switch

In conclusion, the TPD3S716QDBQRQ1 is a highly effective ESD protection device with a compact form factor, making it ideal for a wide range of electronic applications.

Word Count: 398

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TPD3S716QDBQRQ1 dalam penyelesaian teknikal

  1. What is the TPD3S716QDBQRQ1?

    • The TPD3S716QDBQRQ1 is a 3-channel ESD protection device with integrated diodes, designed for use in USB and HDMI applications.

  2. What are the key features of TPD3S716QDBQRQ1?

    • The key features include low capacitance, high ESD protection, integrated diodes, and compatibility with USB and HDMI interfaces.

  3. How does TPD3S716QDBQRQ1 provide ESD protection?

    • TPD3S716QDBQRQ1 provides ESD protection by shunting transient voltages to ground, thereby safeguarding sensitive components from damage.

  4. In what technical solutions can TPD3S716QDBQRQ1 be used?

    • TPD3S716QDBQRQ1 can be used in various technical solutions such as USB ports, HDMI ports, mobile devices, laptops, and other consumer electronics.

  5. What is the operating voltage range of TPD3S716QDBQRQ1?

    • The operating voltage range of TPD3S716QDBQRQ1 is typically between 3V and 5.5V.

  6. What is the maximum data rate supported by TPD3S716QDBQRQ1?

    • TPD3S716QDBQRQ1 supports high-speed data rates up to 5 Gbps, making it suitable for modern high-speed interfaces.

  7. Does TPD3S716QDBQRQ1 support hot-plugging?

    • Yes, TPD3S716QDBQRQ1 supports hot-plugging, allowing for seamless connection and disconnection of devices without causing damage.

  8. What are the typical applications of TPD3S716QDBQRQ1 in technical solutions?

    • Typical applications include protecting USB and HDMI ports on smartphones, tablets, laptops, docking stations, and other electronic devices.

  9. What are the thermal considerations for TPD3S716QDBQRQ1?

    • Thermal considerations include proper PCB layout, heat dissipation, and ensuring that the device operates within its specified temperature range.

  10. Is TPD3S716QDBQRQ1 compliant with industry standards?

    • Yes, TPD3S716QDBQRQ1 is compliant with industry standards such as IEC 61000-4-2 for ESD protection, making it suitable for use in various technical solutions.