Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TPS2224APWPG4
Lihat Butiran Helaian data

TPS2224APWPG4

Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Low power consumption - Wide input voltage range - Overcurrent protection - Thermal shutdown protection

Package: TSSOP-20

Essence: The TPS2224APWPG4 is a power management IC designed to regulate and control the power supply in various electronic devices.

Packaging/Quantity: The TPS2224APWPG4 is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 18V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: Up to 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The TPS2224APWPG4 has a total of 20 pins, each serving a specific function. Here is the detailed pin configuration:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. PGND: Power ground pin
  4. SW: Switching node pin
  5. BOOT: Bootstrap capacitor pin
  6. LX: Inductor connection pin
  7. COMP: Compensation pin
  8. FB: Feedback pin
  9. SS/TR: Soft-start/Tracking pin
  10. VREF: Reference voltage pin
  11. AGND: Analog ground pin
  12. PG: Power good pin
  13. VCC: Supply voltage pin
  14. VSENSE: Current sense pin
  15. ISET: Current limit set pin
  16. SS/TR: Soft-start/Tracking pin
  17. SS/TR: Soft-start/Tracking pin
  18. SS/TR: Soft-start/Tracking pin
  19. SS/TR: Soft-start/Tracking pin
  20. PGND: Power ground pin

Functional Features

  • Integrated synchronous buck converter
  • Adjustable output voltage
  • Overcurrent protection with hiccup mode
  • Thermal shutdown protection
  • Soft-start and tracking capability
  • Power good signal for fault detection

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Wide input voltage range allows for versatile applications - Compact package size - Comprehensive protection features ensure device safety - Adjustable output voltage provides flexibility

Disadvantages: - Relatively high cost compared to non-integrated solutions - Limited output current compared to some other power management ICs

Working Principles

The TPS2224APWPG4 operates as a synchronous buck converter, converting the input voltage to a regulated output voltage. It utilizes pulse-width modulation (PWM) techniques to control the switching of the internal power MOSFETs. The feedback loop continuously monitors the output voltage and adjusts the duty cycle to maintain the desired voltage level. The integrated protection features ensure safe operation under various conditions.

Detailed Application Field Plans

The TPS2224APWPG4 is widely used in various electronic devices that require efficient power management. Some common application fields include:

  1. Mobile devices: Smartphones, tablets, portable media players
  2. Computer peripherals: Printers, scanners, external hard drives
  3. Consumer electronics: TVs, set-top boxes, gaming consoles
  4. Industrial equipment: Test and measurement instruments, automation systems
  5. Automotive electronics: Infotainment systems, navigation devices

Detailed and Complete Alternative Models

  1. TPS2220APWPG4: Similar specifications and features, but with lower output current capability.
  2. TPS2226APWPG4: Higher output current capability, suitable for applications requiring higher power levels.
  3. TPS2228APWPG4: Enhanced protection features, including overvoltage and undervoltage lockout.

These alternative models offer different trade-offs in terms of output current, protection features, and cost, allowing designers to choose the most suitable option for their specific application requirements.

Note: The content provided above is a sample entry and may not reflect actual specifications or details of the TPS2224APWPG4 or its alternatives. Please refer to the official datasheets for accurate information.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TPS2224APWPG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TPS2224APWPG4 in technical solutions:

  1. Q: What is TPS2224APWPG4? A: TPS2224APWPG4 is a power distribution switch with integrated current limiting, ideal for applications requiring multiple power supplies.

  2. Q: What is the maximum input voltage supported by TPS2224APWPG4? A: The maximum input voltage supported by TPS2224APWPG4 is 5.5V.

  3. Q: Can TPS2224APWPG4 handle overcurrent conditions? A: Yes, TPS2224APWPG4 has built-in current limiting and thermal shutdown protection to handle overcurrent conditions.

  4. Q: How many output channels does TPS2224APWPG4 have? A: TPS2224APWPG4 has four independent output channels.

  5. Q: What is the maximum continuous current per channel supported by TPS2224APWPG4? A: The maximum continuous current per channel supported by TPS2224APWPG4 is 500mA.

  6. Q: Can TPS2224APWPG4 be used in battery-powered applications? A: Yes, TPS2224APWPG4 can be used in battery-powered applications as it has low quiescent current and supports low-voltage operation.

  7. Q: Does TPS2224APWPG4 support reverse current protection? A: No, TPS2224APWPG4 does not have built-in reverse current protection. Additional circuitry may be required for reverse current protection.

  8. Q: What is the operating temperature range of TPS2224APWPG4? A: The operating temperature range of TPS2224APWPG4 is -40°C to +85°C.

  9. Q: Can TPS2224APWPG4 be used in automotive applications? A: Yes, TPS2224APWPG4 is suitable for automotive applications as it meets the AEC-Q100 qualification requirements.

  10. Q: What package does TPS2224APWPG4 come in? A: TPS2224APWPG4 is available in a 20-pin HTSSOP package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.