Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TPS2378DDAR
Lihat Butiran Helaian data

TPS2378DDAR

Product Overview

Category

The TPS2378DDAR belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is primarily used in power over Ethernet (PoE) systems, where it enables the delivery of both data and power over a single Ethernet cable. It provides a convenient solution for powering various network devices such as IP cameras, wireless access points, and VoIP phones.

Characteristics

  • Power Management: The TPS2378DDAR integrates multiple functions required for PoE systems, including detection, classification, and power delivery.
  • Efficiency: It offers high efficiency power conversion, minimizing energy losses during power transfer.
  • Protection Features: The IC incorporates various protection mechanisms such as overcurrent, overvoltage, and thermal shutdown, ensuring safe operation under different conditions.

Package and Quantity

The TPS2378DDAR is available in a small outline package (SOIC) with 8 pins. It is typically sold in reels or tubes, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 36V to 57V
  • Output Voltage Range: 3.3V to 5V
  • Maximum Output Current: 600mA
  • Operating Temperature Range: -40°C to 85°C
  • Power Dissipation: 1.2W

Pin Configuration

The TPS2378DDAR features the following pin configuration:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. VOUT: Output voltage
  4. CLASS: Classification resistor connection
  5. DETECT: Detection resistor connection
  6. RTN: Return path for classification and detection resistors
  7. NC: No connection
  8. NC: No connection

Functional Features

  • Detection and Classification: The TPS2378DDAR incorporates a detection circuitry that identifies whether a connected device is PoE compatible. It also performs classification to determine the power requirements of the device.
  • Power Delivery: Once the device is classified, the IC regulates the power delivery accordingly, ensuring optimal power transfer efficiency.
  • Fault Protection: The IC includes various protection features such as overcurrent and overvoltage protection, safeguarding both the powered device and the PoE system.

Advantages and Disadvantages

Advantages

  • Simplified Design: The TPS2378DDAR simplifies the design of PoE systems by integrating multiple functions into a single IC.
  • Cost-Effective: By eliminating the need for external components, it reduces the overall cost of implementing PoE solutions.
  • Efficient Power Transfer: The IC's high-efficiency power conversion minimizes energy losses during power delivery.

Disadvantages

  • Limited Output Current: The maximum output current of 600mA may not be sufficient for certain power-hungry devices.
  • Temperature Constraints: The operating temperature range of -40°C to 85°C may limit its use in extreme environments.

Working Principles

The TPS2378DDAR operates based on the principles of power over Ethernet. It utilizes detection and classification techniques to identify the power requirements of connected devices. Once classified, it regulates the power delivery to ensure efficient and safe operation.

Detailed Application Field Plans

The TPS2378DDAR finds extensive application in various fields, including:

  1. Network Infrastructure: It is widely used in networking equipment such as switches, routers, and hubs to provide power to connected devices.
  2. Security Systems: The IC is employed in IP cameras, access control systems, and security sensors, enabling them to receive power through the Ethernet cable.
  3. Wireless Communication: It powers wireless access points, enabling seamless connectivity without the need for separate power cables.
  4. Voice over IP (VoIP): The TPS2378DDAR facilitates the integration of VoIP phones into PoE systems, simplifying installation and reducing clutter.

Detailed Alternative Models

  1. TPS2378DDA: Similar to TPS2378DDAR, but available in a different package (QFN) with 10 pins.
  2. TPS2389: A higher-power variant capable of delivering up to 1A of output current.
  3. TPS2376: A lower-power alternative suitable for applications with lower power requirements.

These alternative models offer similar functionality but may vary in terms of package, pin configuration, and power capabilities.

Word count: 578 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TPS2378DDAR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TPS2378DDAR in technical solutions:

  1. Q: What is TPS2378DDAR? A: TPS2378DDAR is a Power over Ethernet (PoE) controller that provides power and data to connected devices over an Ethernet cable.

  2. Q: What are the key features of TPS2378DDAR? A: Some key features of TPS2378DDAR include IEEE 802.3bt compliance, integrated DC-DC converter, advanced power management, and support for multiple PoE classes.

  3. Q: How does TPS2378DDAR enable Power over Ethernet? A: TPS2378DDAR integrates the necessary circuitry to extract power from an Ethernet cable and convert it into usable voltage levels for connected devices.

  4. Q: What is the maximum power output supported by TPS2378DDAR? A: TPS2378DDAR supports up to 90W of power output, making it suitable for high-power PoE applications.

  5. Q: Can TPS2378DDAR be used with both 10/100Mbps and Gigabit Ethernet networks? A: Yes, TPS2378DDAR is compatible with both 10/100Mbps and Gigabit Ethernet networks.

  6. Q: Does TPS2378DDAR support Power Sourcing Equipment (PSE) or Powered Device (PD) applications? A: TPS2378DDAR can be used in both PSE and PD applications, providing flexibility in system design.

  7. Q: What protection features does TPS2378DDAR offer? A: TPS2378DDAR includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  8. Q: Can TPS2378DDAR be used in industrial applications? A: Yes, TPS2378DDAR is suitable for industrial applications due to its wide operating temperature range and robust design.

  9. Q: Does TPS2378DDAR support Power over Ethernet Plus (PoE+) and Power over Ethernet Ultra (PoE++) standards? A: Yes, TPS2378DDAR is compliant with both PoE+ and PoE++ standards, allowing it to deliver power to a wide range of devices.

  10. Q: Are there any evaluation modules or reference designs available for TPS2378DDAR? A: Yes, Texas Instruments provides evaluation modules and reference designs that can help developers quickly prototype and implement TPS2378DDAR-based solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and technical documentation for accurate information.