TUSB1210BRHBTQ1
Product Overview
Category
The TUSB1210BRHBTQ1 belongs to the category of USB (Universal Serial Bus) controllers.
Use
This product is primarily used for USB connectivity and communication purposes. It enables devices to connect and communicate with each other through a standardized USB interface.
Characteristics
- USB 2.0 compliant
- High-speed data transfer rates up to 480 Mbps
- Low power consumption
- Compact and lightweight design
- RoHS (Restriction of Hazardous Substances) compliant
Package
The TUSB1210BRHBTQ1 comes in a small form factor package, making it suitable for space-constrained applications. The package type is BGA (Ball Grid Array).
Essence
The essence of the TUSB1210BRHBTQ1 lies in its ability to provide reliable and efficient USB connectivity, facilitating seamless data transfer between devices.
Packaging/Quantity
This product is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per package varies but is usually in the range of 100 to 1000 units.
Specifications
- USB Specification: USB 2.0
- Data Transfer Rate: Up to 480 Mbps
- Supply Voltage: 3.3V
- Operating Temperature Range: -40°C to +85°C
- Package Type: BGA
- Pin Count: 32
Detailed Pin Configuration
The TUSB1210BRHBTQ1 has a total of 32 pins, each serving a specific function. The pin configuration is as follows:
- VBUS
- D-
- D+
- GND
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
Functional Features
- USB 2.0 compliance ensures compatibility with a wide range of devices.
- High-speed data transfer rates enable fast and efficient file transfers.
- Low power consumption helps conserve energy and prolong device battery life.
- Compact and lightweight design allows for easy integration into various applications.
- RoHS compliance ensures the product is environmentally friendly.
Advantages and Disadvantages
Advantages
- Reliable and efficient USB connectivity
- High-speed data transfer rates
- Low power consumption
- Compact and lightweight design
Disadvantages
- Limited pin configuration options
- Requires additional components for full USB functionality
Working Principles
The TUSB1210BRHBTQ1 operates by receiving and transmitting USB signals through its pins. It incorporates USB protocol handling and data buffering capabilities to ensure reliable and error-free communication between devices. The controller interprets the USB signals and facilitates the transfer of data packets according to the USB specification.
Detailed Application Field Plans
The TUSB1210BRHBTQ1 finds application in various fields, including but not limited to:
- Consumer Electronics: Enables USB connectivity in smartphones, tablets, gaming consoles, and other consumer electronic devices.
- Computer Peripherals: Facilitates USB communication in keyboards, mice, printers, scanners, and other computer peripherals.
- Automotive: Used in car infotainment systems, USB charging ports, and other automotive applications requiring USB connectivity.
- Industrial Automation: Enables USB communication in industrial control systems, data acquisition devices, and other automation equipment.
Detailed and Complete Alternative Models
- TUSB1210BRHB: Similar to TUSB1210BRHBTQ1 but without the automotive qualification.
- TUSB1210BRHBR: Automotive-qualified variant with a different package type (QFN).
- TUSB1210BRHBRG4: Automotive-qualified variant with a different package type (VQFN).
These alternative models offer similar functionality and can be considered as substitutes for the TUSB1210BRHBTQ1 in specific applications.
In conclusion, the TUSB1210BRHBTQ1 is a USB controller that provides reliable and efficient USB connectivity. With its high-speed data transfer rates, low power consumption, and compact design, it is suitable for various applications in consumer electronics, computer peripherals, automotive, and industrial automation.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TUSB1210BRHBTQ1 dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of TUSB1210BRHBTQ1 in technical solutions:
1. What is TUSB1210BRHBTQ1? TUSB1210BRHBTQ1 is a high-speed USB 2.0 hub controller with integrated USB Type-C™ port detection and configuration logic.
2. What are the key features of TUSB1210BRHBTQ1? Some key features of TUSB1210BRHBTQ1 include USB Type-C support, USB 2.0 high-speed operation, integrated power switches, and configurable port control.
3. How many downstream ports does TUSB1210BRHBTQ1 support? TUSB1210BRHBTQ1 supports up to four downstream ports.
4. Can TUSB1210BRHBTQ1 be used for charging devices? Yes, TUSB1210BRHBTQ1 supports USB Battery Charging Specification 1.2 (BC1.2) and can be used for charging devices.
5. Does TUSB1210BRHBTQ1 require external power? Yes, TUSB1210BRHBTQ1 requires an external power supply for its operation.
6. Is TUSB1210BRHBTQ1 compatible with USB 3.0 or higher? No, TUSB1210BRHBTQ1 is specifically designed for USB 2.0 high-speed operation and does not support USB 3.0 or higher speeds.
7. Can TUSB1210BRHBTQ1 be used in automotive applications? Yes, TUSB1210BRHBTQ1 is qualified for automotive applications and meets AEC-Q100 Grade 2 requirements.
8. What is the operating temperature range of TUSB1210BRHBTQ1? TUSB1210BRHBTQ1 has an operating temperature range of -40°C to +105°C.
9. Does TUSB1210BRHBTQ1 support USB Type-C alternate modes? No, TUSB1210BRHBTQ1 does not support USB Type-C alternate modes. It is primarily designed for USB 2.0 hub functionality.
10. What are the typical applications of TUSB1210BRHBTQ1? TUSB1210BRHBTQ1 can be used in various applications such as automotive infotainment systems, docking stations, USB hubs, and USB peripherals requiring USB Type-C connectivity.
Please note that these answers are based on general information and it's always recommended to refer to the official documentation and datasheet for accurate and up-to-date information about TUSB1210BRHBTQ1.